## Basic Types Basic Types — standard GLib types, defined for ease-of-use and portability |

## Functions

#define | G_GINT64_CONSTANT()
#define | G_GUINT64_CONSTANT()
#define | G_GOFFSET_CONSTANT()

## Types and Values

typedef | gboolean
typedef | gpointer
typedef | gconstpointer
typedef | gchar
typedef | guchar
typedef | gint
#define | G_MININT
#define | G_MAXINT
typedef | guint
#define | G_MAXUINT
typedef | gshort
#define | G_MINSHORT
#define | G_MAXSHORT
typedef | gushort
#define | G_MAXUSHORT
typedef | glong
#define | G_MINLONG
#define | G_MAXLONG
typedef | gulong
#define | G_MAXULONG
typedef | gint8
#define | G_MININT8
#define | G_MAXINT8
typedef | guint8
#define | G_MAXUINT8
typedef | gint16
#define | G_MININT16
#define | G_MAXINT16
#define | G_GINT16_MODIFIER
#define | G_GINT16_FORMAT
typedef | guint16
#define | G_MAXUINT16
#define | G_GUINT16_FORMAT
typedef | gint32
#define | G_MININT32
#define | G_MAXINT32
#define | G_GINT32_MODIFIER
#define | G_GINT32_FORMAT
typedef | guint32
#define | G_MAXUINT32
#define | G_GUINT32_FORMAT
typedef | gint64
#define | G_MININT64
#define | G_MAXINT64
#define | G_GINT64_MODIFIER
#define | G_GINT64_FORMAT
typedef | guint64
#define | G_MAXUINT64
#define | G_GUINT64_FORMAT
typedef | gfloat
#define | G_MINFLOAT
#define | G_MAXFLOAT
typedef | gdouble
#define | G_MINDOUBLE
#define | G_MAXDOUBLE
typedef | gsize
#define | G_MAXSIZE
#define | G_GSIZE_MODIFIER
#define | G_GSIZE_FORMAT
typedef | gssize
#define | G_MINSSIZE
#define | G_MAXSSIZE
#define | G_GSSIZE_MODIFIER
#define | G_GSSIZE_FORMAT
typedef | goffset
#define | G_MINOFFSET
#define | G_MAXOFFSET
#define | G_GOFFSET_MODIFIER
#define | G_GOFFSET_FORMAT
typedef | gintptr
#define | G_GINTPTR_MODIFIER
#define | G_GINTPTR_FORMAT
typedef | guintptr
#define | G_GUINTPTR_FORMAT

## Includes

    #include <glib.h>

## Description

GLib defines a number of commonly used types, which can be divided into several groups:

- New types which are not part of standard C (but are defined in various C standard library header files) — gboolean, gssize.

- Integer types which are guaranteed to be the same size across all platforms — gint8, guint8, gint16, guint16, gint32, guint32, gint64, guint64.

- Types which are easier to use than their standard C counterparts - gpointer, gconstpointer, guchar, guint, gushort, gulong.

- Types which correspond exactly to standard C types, but are included for completeness — gchar, gint, gshort, glong, gfloat, gdouble.

- Types which correspond exactly to standard C99 types, but are available to use even if your compiler does not support C99 — gsize, goffset, gintptr, guintptr.

GLib also defines macros for the limits of some of the standard integer and floating point types, as well as macros for suitable `printf()` formats for these types.

Note that depending on the platform and build configuration, the format macros might not be compatible with the system provided `printf()` function, because GLib might use a different `printf()` implementation internally. The format macros will always work with GLib API (like `g_print()`), and with any C99 compatible `printf()` implementation.

## Functions

### G_GINT64_CONSTANT()

    #define G_GINT64_CONSTANT(val) (G_GNUC_EXTENSION (val##LL))

This macro is used to insert 64-bit integer literals into the source code.

It is similar to the standard C `INT64_C` macro, which should be preferred in new code.

#### Parameters

val | a literal integer value, e.g. 0x1d636b02300a7aa7 |

### G_GUINT64_CONSTANT()

    #define G_GUINT64_CONSTANT(val) (G_GNUC_EXTENSION (val##ULL))

This macro is used to insert 64-bit unsigned integer literals into the source code.

It is similar to the standard C `UINT64_C` macro, which should be preferred in new code.

#### Parameters

val | a literal integer value, e.g. 0x1d636b02300a7aa7U |

Since: 2.10

### G_GOFFSET_CONSTANT()

    #define G_GOFFSET_CONSTANT(val) G_GINT64_CONSTANT(val)

This macro is used to insert goffset 64-bit integer literals into the source code.

See also `G_GINT64_CONSTANT()`.

#### Parameters

val | a literal integer value, e.g. 0x1d636b02300a7aa7 |

Since: 2.20

## Types and Values

### gboolean

    typedef gint   gboolean;

A standard boolean type. Variables of this type should only contain the value `TRUE` or `FALSE`.

Never directly compare the contents of a gboolean variable with the values `TRUE` or `FALSE`. Use `if (condition)` to check a gboolean is "true", instead of `if (condition == TRUE)`. Likewise use `if (!condition)` to check a gboolean is "false".

There is no validation when assigning to a gboolean variable and so it could contain any value represented by a gint. This is why the use of `if (condition)` is recommended. All non-zero values in C evaluate to "true".

### gpointer

    typedef void* gpointer;

An untyped pointer, exactly equivalent to `void *`.

The standard C `void *` type should usually be preferred in new code, but `gpointer` can be used in contexts where a type name must be a single word, such as in the `g_type_name()` of `G_TYPE_POINTER` or when generating a family of function names for multiple types using macros.

### gconstpointer

    typedef const void *gconstpointer;

An untyped pointer to constant data, exactly equivalent to `const void *`.

The data pointed to should not be changed.

This is typically used in function prototypes to indicate that the data pointed to will not be altered by the function.

The standard C `const void *` type should usually be preferred in new code, but `gconstpointer` can be used in contexts where a type name must be a single word.

### gchar

    typedef char   gchar;

Equivalent to the standard C `char` type.

This type only exists for symmetry with `guchar`. The standard C `char` type should be preferred in new code.

### guchar

    typedef unsigned char   guchar;

Equivalent to the standard C `unsigned char` type.

The standard C `unsigned char` type should usually be preferred in new code, but `guchar` can be used in contexts where a type name must be a single word, such as in the `g_type_name()` of `G_TYPE_UCHAR` or when generating a family of function names for multiple types using macros.

### gint

    typedef int    gint;

Equivalent to the standard C `int` type.

Values of this type can range from `INT_MIN` to `INT_MAX`, or equivalently from `G_MININT` to `G_MAXINT`.

This type only exists for symmetry with `guint`. The standard C `int` type should be preferred in new code.

### G_MININT

    #define G_MININT INT_MIN

The minimum value which can be held in a gint.

This is the same as standard C `INT_MIN`, which is available since C99 and should be preferred in new code.

### G_MAXINT

    #define G_MAXINT INT_MAX

The maximum value which can be held in a gint.

This is the same as standard C `INT_MAX`, which is available since C99 and should be preferred in new code.

### guint

    typedef unsigned int    guint;

Equivalent to the standard C `unsigned int` type.

Values of this type can range from 0 to `UINT_MAX`, or equivalently 0 to `G_MAXUINT`.

The standard C `unsigned int` type should usually be preferred in new code, but `guint` can be used in contexts where a type name must be a single word, such as in the `g_type_name()` of `G_TYPE_UINT` or when generating a family of function names for multiple types using macros.

### G_MAXUINT

    #define G_MAXUINT UINT_MAX

The maximum value which can be held in a guint.

This is the same as standard C `UINT_MAX`, which is available since C99 and should be preferred in new code.

### gshort

    typedef short  gshort;

Equivalent to the standard C `short` type.

Values of this type can range from `SHRT_MIN` to `SHRT_MAX`, or equivalently `G_MINSHORT` to `G_MAXSHORT`.

This type only exists for symmetry with `gushort`. The standard C `short` type should be preferred in new code.

### G_MINSHORT

    #define G_MINSHORT SHRT_MIN

The minimum value which can be held in a gshort.

This is the same as standard C `SHRT_MIN`, which is available since C99 and should be preferred in new code.

### G_MAXSHORT

    #define G_MAXSHORT SHRT_MAX

The maximum value which can be held in a gshort.

This is the same as standard C `SHRT_MAX`, which is available since C99 and should be preferred in new code.

### gushort

    typedef unsigned short  gushort;

Equivalent to the standard C `unsigned short` type.

Values of this type can range from 0 to `USHRT_MAX`, or equivalently from 0 to `G_MAXUSHORT`.

The standard C `unsigned short` type should usually be preferred in new code, but `gushort` can be used in contexts where a type name must be a single word, such as when generating a family of function names for multiple types using macros.

### G_MAXUSHORT

    #define G_MAXUSHORT USHRT_MAX

The maximum value which can be held in a gushort.

This is the same as standard C `USHRT_MAX`, which is available since C99 and should be preferred in new code.

### glong

    typedef long   glong;

Equivalent to the standard C `long` type.

Values of this type can range from `LONG_MIN` to `LONG_MAX`, or equivalently `G_MINLONG` to `G_MAXLONG`.

This type only exists for symmetry with `gulong`. The standard C `long` type should be preferred in new code.

### G_MINLONG

    #define G_MINLONG LONG_MIN

The minimum value which can be held in a glong.

This is the same as standard C `LONG_MIN`, which is available since C99 and should be preferred in new code.

### G_MAXLONG

    #define G_MAXLONG LONG_MAX

The maximum value which can be held in a glong.

This is the same as standard C `ULONG_MAX`, which is available since C99 and should be preferred in new code.

### gulong

    typedef unsigned long   gulong;

Equivalent to the standard C `unsigned long` type.

Values of this type can range from 0 to `G_MAXULONG`.

The standard C `unsigned long` type should usually be preferred in new code, but `gulong` can be used in contexts where a type name must be a single word, such as in the `g_type_name()` of `G_TYPE_ULONG` or when generating a family of function names for multiple types using macros.

### G_MAXULONG

    #define G_MAXULONG ULONG_MAX

The maximum value which can be held in a gulong.

This is the same as standard C `ULONG_MAX`, which is available since C99 and should be preferred in new code.

### gint8

    typedef signed char gint8;

A signed integer guaranteed to be 8 bits on all platforms, similar to the standard C `int8_t`.

The `int8_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `gint8` (see gsize for more details).

Values of this type can range from `G_MININT8` (= -128) to `G_MAXINT8` (= 127).

### G_MININT8

    #define G_MININT8 ((gint8) (-G_MAXINT8 - 1))

The minimum value which can be held in a gint8.

Since: 2.4

### G_MAXINT8

    #define G_MAXINT8 ((gint8)  0x7f)

The maximum value which can be held in a gint8.

This is the same as standard C `INT8_MAX`, which should be preferred in new code.

Since: 2.4

### guint8

    typedef unsigned char guint8;

An unsigned integer guaranteed to be 8 bits on all platforms, similar to the standard C `uint8_t`.

The `uint8_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `guint8` (see gsize for more details).

Values of this type can range from 0 to `G_MAXUINT8` (= 255).

### G_MAXUINT8

    #define G_MAXUINT8 ((guint8) 0xff)

The maximum value which can be held in a guint8.

This is the same as standard C `UINT8_MAX`, which should be preferred in new code.

Since: 2.4

### gint16

    typedef signed short gint16;

A signed integer guaranteed to be 16 bits on all platforms, similar to the standard C `int16_t`.

The `int16_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `gint16` (see gsize for more details).

Values of this type can range from `G_MININT16` (= -32,768) to `G_MAXINT16` (= 32,767).

To print or scan values of this type, use `G_GINT16_MODIFIER` and/or `G_GINT16_FORMAT`.

### G_MININT16

    #define G_MININT16 ((gint16) (-G_MAXINT16 - 1))

The minimum value which can be held in a gint16.

Since: 2.4

### G_MAXINT16

    #define G_MAXINT16 ((gint16)  0x7fff)

The maximum value which can be held in a gint16.

This is the same as standard C `INT16_MAX`, which should be preferred in new code.

Since: 2.4

### G_GINT16_MODIFIER

    #define G_GINT16_MODIFIER "h"

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gint16 or guint16. It is a string literal, but doesn't include the percent-sign, such that you can add precision and length modifiers between percent-sign and conversion specifier and append a conversion specifier.

The following example prints "0x7b";

    1
    2
    gint16 value = 123;
    g_print ("%#" G_GINT16_MODIFIER "x", value);

This is not necessarily the correct modifier for printing and scanning `int16_t` values, even though the in-memory representation is the same. Standard C macros like `PRId16` and `SCNd16` should be used for `int16_t`.

Since: 2.4

### G_GINT16_FORMAT

    #define G_GINT16_FORMAT "hi"

This is the platform dependent conversion specifier for scanning and printing values of type gint16. It is a string literal, but doesn't include the percent-sign, such that you can add precision and length modifiers between percent-sign and conversion specifier.

    1
    2
    3
    4
    5
    6
    7
    8
    9
    gint16 in;
    gint32 out;
    sscanf ("42", "%" G_GINT16_FORMAT, &in)
    out = in * 1000;
    g_print ("%" G_GINT32_FORMAT, out);

    This is not necessarily the correct format for printing and scanning
    `int16_t` values, even though the in-memory representation is the same.
    Standard C macros like `PRId16` and `SCNd16` should be used for `int16_t`.

### guint16

    typedef unsigned short guint16;

An unsigned integer guaranteed to be 16 bits on all platforms, similar to the standard C `uint16_t`.

The `uint16_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `guint16` (see gsize for more details).

Values of this type can range from 0 to `G_MAXUINT16` (= 65,535).

To print or scan values of this type, use `G_GINT16_MODIFIER` and/or `G_GUINT16_FORMAT`.

### G_MAXUINT16

    #define G_MAXUINT16 ((guint16) 0xffff)

The maximum value which can be held in a guint16.

This is the same as standard C `UINT16_MAX`, which should be preferred in new code.

Since: 2.4

### G_GUINT16_FORMAT

    #define G_GUINT16_FORMAT "hu"

This is the platform dependent conversion specifier for scanning and printing values of type guint16. See also `G_GINT16_FORMAT`

This is not necessarily the correct modifier for printing and scanning `uint16_t` values, even though the in-memory representation is the same. Standard C macros like `PRIu16` and `SCNu16` should be used for `uint16_t`.

### gint32

    typedef signed int gint32;

A signed integer guaranteed to be 32 bits on all platforms.

The `int32_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `gint16` (see gsize for more details).

Values of this type can range from `G_MININT32` (= -2,147,483,648) to `G_MAXINT32` (= 2,147,483,647).

To print or scan values of this type, use `G_GINT32_MODIFIER` and/or `G_GINT32_FORMAT`.

Note that on platforms with more than one 32-bit standard integer type, `gint32` and `int32_t` are not necessarily implemented by the same 32-bit integer type. For example, on an ILP32 platform where `int` and `long` are both 32-bit, it might be the case that one of these types is `int` and the other is `long`. See gsize for more details of what this implies.

### G_MININT32

    #define G_MININT32 ((gint32) (-G_MAXINT32 - 1))

The minimum value which can be held in a gint32.

Since: 2.4

### G_MAXINT32

    #define G_MAXINT32 ((gint32)  0x7fffffff)

The maximum value which can be held in a gint32.

This is the same as standard C `INT32_MAX`, which should be preferred in new code.

Since: 2.4

### G_GINT32_MODIFIER

    #define G_GINT32_MODIFIER ""

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gint32 or guint32. It is a string literal. See also `G_GINT16_MODIFIER`.

This is not necessarily the correct modifier for printing and scanning `int32_t` values, even though the in-memory representation is the same. Standard C macros like `PRId32` and `SCNd32` should be used for `int32_t`.

Since: 2.4

### G_GINT32_FORMAT

    #define G_GINT32_FORMAT "i"

This is the platform dependent conversion specifier for scanning and printing values of type gint32. See also `G_GINT16_FORMAT`.

This is not necessarily the correct modifier for printing and scanning `int32_t` values, even though the in-memory representation is the same. Standard C macros like `PRId32` and `SCNd32` should be used for `int32_t`.

### guint32

    typedef unsigned int guint32;

An unsigned integer guaranteed to be 32 bits on all platforms, similar to the standard C `uint32_t`.

The `uint32_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `guint32` (see gsize for more details).

Values of this type can range from 0 to `G_MAXUINT32` (= 4,294,967,295).

To print or scan values of this type, use `G_GINT32_MODIFIER` and/or `G_GUINT32_FORMAT`.

Note that on platforms with more than one 32-bit standard integer type, `guint32` and `uint32_t` are not necessarily implemented by the same 32-bit integer type. See gsize for more details of what this implies.

### G_MAXUINT32

    #define G_MAXUINT32 ((guint32) 0xffffffff)

The maximum value which can be held in a guint32.

This is the same as standard C `UINT32_MAX`, which should be preferred in new code.

Since: 2.4

### G_GUINT32_FORMAT

    #define G_GUINT32_FORMAT "u"

This is the platform dependent conversion specifier for scanning and printing values of type guint32. See also `G_GINT16_FORMAT`.

This is not necessarily the correct modifier for printing and scanning `uint32_t` values, even though the in-memory representation is the same. Standard C macros like `PRIu32` and `SCNu32` should be used for `uint32_t`.

### gint64

    G_GNUC_EXTENSION typedef signed long long gint64;

A signed integer guaranteed to be 64 bits on all platforms, similar to the standard C `int64_t`.

The `int64_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `gint64` (see gsize for more details).

Values of this type can range from `G_MININT64` (= -9,223,372,036,854,775,808) to `G_MAXINT64` (= 9,223,372,036,854,775,807).

To print or scan values of this type, use `G_GINT64_MODIFIER` and/or `G_GINT64_FORMAT`.

Note that on platforms with more than one 64-bit standard integer type, `gint64` and `int64_t` are not necessarily implemented by the same 64-bit integer type. For example, on a platform where both `long` and `long long` are 64-bit, it might be the case that one of those types is used for `gint64` and the other is used for `int64_t`. See gsize for more details of what this implies.

### G_MININT64

    #define G_MININT64 ((gint64) (-G_MAXINT64 - G_GINT64_CONSTANT(1)))

The minimum value which can be held in a gint64.

### G_MAXINT64

    #define G_MAXINT64 G_GINT64_CONSTANT(0x7fffffffffffffff)

The maximum value which can be held in a gint64.

### G_GINT64_MODIFIER

    #define G_GINT64_MODIFIER "ll"

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gint64 or guint64. It is a string literal.

Some platforms do not support printing 64-bit integers, even though the types are supported. On such platforms `G_GINT64_MODIFIER` is not defined.

This is not necessarily the correct modifier for printing and scanning `int64_t` values, even though the in-memory representation is the same. Standard C macros like `PRId64` and `SCNd64` should be used for `int64_t`.

Since: 2.4

### G_GINT64_FORMAT

    #define G_GINT64_FORMAT "lli"

This is the platform dependent conversion specifier for scanning and printing values of type gint64. See also `G_GINT16_FORMAT`.

Some platforms do not support scanning and printing 64-bit integers, even though the types are supported. On such platforms `G_GINT64_FORMAT` is not defined. Note that `scanf()` may not support 64-bit integers, even if `G_GINT64_FORMAT` is defined. Due to its weak error handling, `scanf()` is not recommended for parsing anyway; consider using `g_ascii_strtoull()` instead.

This is not necessarily the correct format for printing and scanning `int64_t` values, even though the in-memory representation is the same. Standard C macros like `PRId64` and `SCNd64` should be used for `int64_t`.

### guint64

    G_GNUC_EXTENSION typedef unsigned long long guint64;

An unsigned integer guaranteed to be 64-bits on all platforms, similar to the standard C `uint64_t` type.

The `uint64_t` type should be preferred in new code, unless consistency with pre-existing APIs requires use of `guint64` (see gsize for more details).

Values of this type can range from 0 to `G_MAXUINT64` (= 18,446,744,073,709,551,615).

To print or scan values of this type, use `G_GINT64_MODIFIER` and/or `G_GUINT64_FORMAT`.

Note that on platforms with more than one 64-bit standard integer type, `guint64` and `uint64_t` are not necessarily implemented by the same 64-bit integer type. See gsize for more details of what this implies.

### G_MAXUINT64

    #define G_MAXUINT64 G_GUINT64_CONSTANT(0xffffffffffffffff)

The maximum value which can be held in a guint64.

This is the same as standard C `UINT64_MAX`, which should be preferred in new code.

### G_GUINT64_FORMAT

    #define G_GUINT64_FORMAT "llu"

This is the platform dependent conversion specifier for scanning and printing values of type guint64. See also `G_GINT16_FORMAT`.

Some platforms do not support scanning and printing 64-bit integers, even though the types are supported. On such platforms `G_GUINT64_FORMAT` is not defined. Note that `scanf()` may not support 64-bit integers, even if `G_GINT64_FORMAT` is defined. Due to its weak error handling, `scanf()` is not recommended for parsing anyway; consider using `g_ascii_strtoull()` instead.

This is not necessarily the correct modifier for printing and scanning `uint64_t` values, even though the in-memory representation is the same. Standard C macros like `PRIu64` and `SCNu64` should be used for `uint64_t`.

### gfloat

    typedef float   gfloat;

Equivalent to the standard C `float` type.

Values of this type can range from `-FLT_MAX` to `FLT_MAX`, or equivalently from -`G_MAXFLOAT` to `G_MAXFLOAT`.

### G_MINFLOAT

    #define G_MINFLOAT FLT_MIN

The minimum positive value which can be held in a gfloat.

If you are interested in the smallest value which can be held in a gfloat, use -`G_MAXFLOAT`.

This is the same as standard C `FLT_MIN`, which is available since C99 and should be preferred in new code.

### G_MAXFLOAT

    #define G_MAXFLOAT FLT_MAX

The maximum value which can be held in a gfloat.

This is the same as standard C `FLT_MAX`, which is available since C99 and should be preferred in new code.

### gdouble

    typedef double  gdouble;

Equivalent to the standard C `double` type.

Values of this type can range from `-DBL_MAX` to `DBL_MAX`, or equivalently from -`G_MAXDOUBLE` to `G_MAXDOUBLE`.

### G_MINDOUBLE

    #define G_MINDOUBLE DBL_MIN

The minimum positive value which can be held in a gdouble.

If you are interested in the smallest value which can be held in a gdouble, use -`G_MAXDOUBLE`.

This is the same as standard C `DBL_MIN`, which is available since C99 and should be preferred in new code.

### G_MAXDOUBLE

    #define G_MAXDOUBLE DBL_MAX

The maximum value which can be held in a gdouble.

This is the same as standard C `DBL_MAX`, which is available since C99 and should be preferred in new code.

### gsize

    typedef unsigned int gsize;

An unsigned integer type of the result of the `sizeof` operator, corresponding to the `size_t` type defined in C99.

The standard `size_t` type should be preferred in new code, unless consistency with pre-existing APIs requires `gsize` (see below for more details).

`gsize` is usually 32 bit wide on a 32-bit platform and 64 bit wide on a 64-bit platform. Values of this type can range from 0 to `G_MAXSIZE`.

This type is wide enough to hold the size of the largest possible memory allocation, but is not guaranteed to be wide enough to hold the numeric value of a pointer: on platforms that use tagged pointers, such as CHERI, pointers can be numerically larger than the size of the address space. If the numeric value of a pointer needs to be stored in an integer without information loss, use the standard C types `intptr_t` or `uintptr_t`, or the similar GLib types gintptr or guintptr.

To print or scan values of this type, use `G_GSIZE_MODIFIER` and/or `G_GSIZE_FORMAT`.

Note that on platforms where more than one standard integer type is the same size, `size_t` and `gsize` are always the same size but are not necessarily implemented by the same standard integer type. For example, on an ILP32 platform where `int`, `long` and pointers are all 32-bit, `size_t` might be `unsigned long` while `gsize` might be `unsigned int`. This can result in compiler warnings or unexpected C++ name-mangling if the two types are used inconsistently.

As a result, changing a type from `gsize` to `size_t` in existing APIs might be an incompatible API or ABI change, especially if C++ is involved. The safe option is to leave existing APIs using the same type that they have historically used, and only use the standard C types in new APIs.

Similar considerations apply to all the fixed-size types (gint8, guint8, gint16, guint16, gint32, guint32, gint64, guint64 and goffset), as well as gintptr and guintptr. Types that are 32 bits or larger are particularly likely to be affected by this.

### G_MAXSIZE

    #define G_MAXSIZE G_MAXUINT

The maximum value which can be held in a gsize.

This is the same as standard C `SIZE_MAX` (available since C99), which should be preferred in new code.

Since: 2.4

### G_GSIZE_MODIFIER

    #define G_GSIZE_MODIFIER ""

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gsize. It is a string literal.

Note that this is not necessarily the correct modifier to scan or print a `size_t`, even though the in-memory representation is the same. The Standard C `"z"` modifier should be used for `size_t`, assuming a C99-compliant `printf` implementation is available.

Since: 2.6

### G_GSIZE_FORMAT

    #define G_GSIZE_FORMAT "u"

This is the platform dependent conversion specifier for scanning and printing values of type gsize. See also `G_GINT16_FORMAT`.

Note that this is not necessarily the correct format to scan or print a `size_t`, even though the in-memory representation is the same. The standard C `"zu"` format should be used for `size_t`, assuming a C99-compliant `printf` implementation is available.

Since: 2.6

### gssize

    typedef signed int gssize;

A signed variant of gsize, corresponding to the `ssize_t` defined in POSIX or the similar `SSIZE_T` in Windows.

In new platform-specific code, consider using `ssize_t` or `SSIZE_T` directly.

Values of this type can range from `G_MINSSIZE` to `G_MAXSSIZE`.

Note that on platforms where `ssize_t` is implemented, `ssize_t` and `gssize` might be implemented by different standard integer types of the same size. Similarly, on Windows, `SSIZE_T` and `gssize` might be implemented by different standard integer types of the same size. See gsize for more details.

This type is also not guaranteed to be the same as standard C `ptrdiff_t`, although they are the same on many platforms.

To print or scan values of this type, use `G_GSSIZE_MODIFIER` and/or `G_GSSIZE_FORMAT`.

### G_MINSSIZE

    #define G_MINSSIZE G_MININT

The minimum value which can be held in a gssize.

Since: 2.14

### G_MAXSSIZE

    #define G_MAXSSIZE G_MAXINT

The maximum value which can be held in a gssize.

Since: 2.14

### G_GSSIZE_MODIFIER

    #define G_GSSIZE_MODIFIER ""

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gssize. It is a string literal.

Note that this is not necessarily the correct modifier to scan or print a POSIX `ssize_t` or a Windows `SSIZE_T`, even though the in-memory representation is the same. On POSIX platforms, the `"z"` modifier should be used for `ssize_t`.

Since: 2.6

### G_GSSIZE_FORMAT

    #define G_GSSIZE_FORMAT "i"

This is the platform dependent conversion specifier for scanning and printing values of type gssize. See also `G_GINT16_FORMAT`.

Note that this is not necessarily the correct format to scan or print a POSIX `ssize_t` or a Windows `SSIZE_T`, even though the in-memory representation is the same. On POSIX platforms, the `"zd"` format should be used for `ssize_t`.

Since: 2.6

### goffset

    typedef gint64 goffset;

A signed integer type that is used for file offsets, corresponding to the POSIX type `off_t` as if compiling with `_FILE_OFFSET_BITS` set to 64. goffset is always 64 bits wide, even on 32-bit architectures, and even if `off_t` is only 32 bits. Values of this type can range from `G_MINOFFSET` to `G_MAXOFFSET`.

To print or scan values of this type, use `G_GOFFSET_MODIFIER` and/or `G_GOFFSET_FORMAT`.

On platforms with more than one 64-bit standard integer type, even if `off_t` is also 64 bits in size, `goffset` and `off_t` are not necessarily implemented by the same 64-bit integer type. See gsize for more details of what this implies.

Since: 2.14

### G_MINOFFSET

    #define G_MINOFFSET G_MININT64

The minimum value which can be held in a goffset.

### G_MAXOFFSET

    #define G_MAXOFFSET G_MAXINT64

The maximum value which can be held in a goffset.

### G_GOFFSET_MODIFIER

    #define G_GOFFSET_MODIFIER      G_GINT64_MODIFIER

The platform dependent length modifier for conversion specifiers for scanning and printing values of type goffset. It is a string literal. See also `G_GINT64_MODIFIER`.

This modifier should only be used with goffset values, and not with `off_t`, which is not necessarily the same type or even the same size.

Since: 2.20

### G_GOFFSET_FORMAT

    #define G_GOFFSET_FORMAT        G_GINT64_FORMAT

This is the platform dependent conversion specifier for scanning and printing values of type goffset. See also `G_GINT64_FORMAT`.

This format should only be used with goffset values, and not with `off_t`, which is not necessarily the same type or even the same size.

Since: 2.20

### gintptr

    typedef signed int gintptr;

Corresponds to the C99 type intptr_t, a signed integer type that can hold any pointer.

The standard `intptr_t` type should be preferred in new code, unless consistency with pre-existing APIs requires `gintptr`. Note that `intptr_t` and `gintptr` might be implemented by different standard integer types of the same size. See gsize for more details.

gintptr is not guaranteed to be the same type or the same size as gssize, even though they are the same on many CPU architectures.

To print or scan values of this type, use `G_GINTPTR_MODIFIER` and/or `G_GINTPTR_FORMAT`.

Since: 2.18

### G_GINTPTR_MODIFIER

    #define G_GINTPTR_MODIFIER      ""

The platform dependent length modifier for conversion specifiers for scanning and printing values of type gintptr or guintptr. It is a string literal.

Note that this is not necessarily the correct modifier to scan or print an `intptr_t`, even though the in-memory representation is the same. Standard C macros like `PRIdPTR` and `SCNdPTR` should be used for `intptr_t`.

Since: 2.22

### G_GINTPTR_FORMAT

    #define G_GINTPTR_FORMAT        "i"

This is the platform dependent conversion specifier for scanning and printing values of type gintptr.

Note that this is not necessarily the correct format to scan or print an `intptr_t`, even though the in-memory representation is the same. Standard C macros like `PRIdPTR` and `SCNdPTR` should be used for `intptr_t`.

Since: 2.22

### guintptr

    typedef unsigned int guintptr;

Corresponds to the C99 type uintptr_t, an unsigned integer type that can hold any pointer.

The standard `uintptr_t` type should be preferred in new code, unless consistency with pre-existing APIs requires `guintptr`. Note that `uintptr_t` and `guintptr` might be implemented by different standard integer types of the same size. See gsize for more details.

guintptr is not guaranteed to be the same type or the same size as gsize, even though they are the same on many CPU architectures.

To print or scan values of this type, use `G_GINTPTR_MODIFIER` and/or `G_GUINTPTR_FORMAT`.

Since: 2.18

### G_GUINTPTR_FORMAT

    #define G_GUINTPTR_FORMAT       "u"

This is the platform dependent conversion specifier for scanning and printing values of type guintptr.

Note that this is not necessarily the correct format to scan or print a `uintptr_t`, even though the in-memory representation is the same. Standard C macros like `PRIuPTR` and `SCNuPTR` should be used for `uintptr_t`.

Since: 2.22