QMICLI(1)

NAME
qmicli - Control QMI devices

DESCRIPTION

  Usage:

    lt-qmicli [OPTION?] - Control QMI devices

  Help Options:

-h, --help
    Show help options

--help-all
    Show all help options

--help-dms
    Show Device Management Service options

--help-nas
    Show Network Access Service options

--help-wds
    Show Wireless Data Service options

--help-pbm
    Show Phonebook Management options

--help-pdc
    Show platform device configurations options

--help-uim
    Show User Identity Module options

--help-wms
    Show Wireless Messaging Service options

--help-wda
    Show Wireless Data Administrative options

--help-voice
    Show Voice Service options

--help-loc
    Show location options

--help-qos
    Show Quality of Service options

--help-gas
    Show General Application Service options

DMS options

--dms-get-ids
    Get IDs

--dms-get-capabilities
    Get capabilities

--dms-get-manufacturer
    Get manufacturer

--dms-get-model
    Get model

--dms-get-revision
    Get revision

--dms-get-msisdn
    Get MSISDN

--dms-get-power-state
    Get power state

--dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]
    Set PIN protection in the UIM

--dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]
    Verify PIN

--dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]
    Unblock PIN

--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
    Change PIN

--dms-uim-get-pin-status
    Get PIN status

--dms-uim-get-iccid
    Get ICCID

--dms-uim-get-imsi
    Get IMSI

--dms-uim-get-state
    Get UIM State

--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
    Get CK Status

--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
    Disable CK protection

--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
    Unblock CK

--dms-get-hardware-revision
    Get the HW revision

--dms-get-operating-mode
    Get the device operating mode

--dms-set-operating-mode=[(Operating mode)]
    Set the device operating mode

--dms-get-time
    Get the device time

--dms-get-prl-version
    Get the PRL version

--dms-get-activation-state
    Get the state of the service activation

--dms-activate-automatic=[Activation Code]
    Request automatic service activation

--dms-activate-manual=[SPC,SID,MDN,MIN]
    Request manual service activation

--dms-get-user-lock-state
    Get the state of the user lock

--dms-set-user-lock-state=[(disable|enable),(current lock code)]
    Set the state of the user lock

--dms-set-user-lock-code=[(old lock code),(new lock code)]
    Change the user lock code

--dms-read-user-data
    Read user data

--dms-write-user-data=[(User data)]
    Write user data

--dms-read-eri-file
    Read ERI file

--dms-restore-factory-defaults=[(Service Programming Code)]
    Restore factory defaults

--dms-validate-service-programming-code=[(Service Programming Code)]
    Validate the Service Programming Code

--dms-set-firmware-id
    Set firmware id

--dms-get-band-capabilities
    Get band capabilities

--dms-get-factory-sku
    Get factory stock keeping unit

--dms-list-stored-images
    List stored images

--dms-select-stored-image=[modem#,pri#] where # is the index
    Select stored image

--dms-delete-stored-image=[modem#|pri#] where # is the index
    Delete stored image

--dms-get-firmware-preference
    Get firmware preference

--dms-set-firmware-preference=[(fwver),(config),(carrier)]
    Set firmware preference

--dms-get-boot-image-download-mode
    Get boot image download mode

--dms-set-boot-image-download-mode=[normal|boot-and-recovery]
    Set boot image download mode

--dms-get-software-version
    Get software version

--dms-set-fcc-authentication
    Set FCC authentication

--dms-get-supported-messages
    Get supported messages

--dms-hp-change-device-mode=[fastboot]
    Change device mode (HP specific)

--dms-swi-get-current-firmware
    Get Current Firmware (Sierra Wireless specific)

--dms-swi-get-usb-composition
    Get current and supported USB compositions (Sierra Wireless specific)

--dms-swi-set-usb-composition=[#]
    Set USB composition (Sierra Wireless specific)

--dms-dell-change-device-mode=[fastboot-ota|fastboot-online]
    Change device mode (DELL specific)

--dms-dell-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]
    Get firmware version (DELL specific)

--dms-reset
    Reset the service state

--dms-noop
    Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options

--nas-get-signal-strength
    Get signal strength

--nas-get-signal-info
    Get signal info

--nas-get-tx-rx-info=[(Radio Interface)]
    Get TX/RX info

--nas-get-home-network
    Get home network

--nas-get-serving-system
    Get serving system

--nas-get-system-info
    Get system info

--nas-get-technology-preference
    Get technology preference

--nas-get-system-selection-preference
    Get system selection preference

--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]]
    Set system selection preference

--nas-network-scan
    Scan networks

--nas-get-cell-location-info
    Get Cell Location Info

--nas-force-network-search
    Force network search

--nas-get-operator-name
    Get operator name data

--nas-get-lte-cphy-ca-info
    Get LTE Cphy CA Info

--nas-get-rf-band-info
    Get RF Band Info

--nas-get-supported-messages
    Get supported messages

--nas-swi-get-status
    Get status ((Sierra Wireless specific)

--nas-reset
    Reset the service state

--nas-noop
    Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options

--wds-start-network=["key=value,..."]
    Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))

--wds-follow-network
    Follow the network status until disconnected. Use with `--wds-start-network'

--wds-stop-network=[Packet data handle] OR [disable-autoconnect]
    Stop network

--wds-get-current-settings
    Get current settings

--wds-get-packet-service-status
    Get packet service status

--wds-get-packet-statistics
    Get packet statistics

--wds-get-data-bearer-technology
    Get data bearer technology

--wds-get-current-data-bearer-technology
    Get current data bearer technology

--wds-go-dormant
    Make the active data connection go dormant

--wds-go-active
    Make the active data connection go active

--wds-get-dormancy-status
    Get the dormancy status of the active data connection

--wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"]
    Create new profile using first available profile index (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"]
    Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."]
    Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-delete-profile=[(3gpp|3gpp2),#]
    Delete existing profile

--wds-get-profile-list=[3gpp|3gpp2]
    Get profile list

--wds-get-default-profile-num=[3gpp|3gpp2]
    Get default profile number

--wds-set-default-profile-num=[(3gpp|3gpp2),#]
    Set default profile number

--wds-get-default-settings=[3gpp|3gpp2]
    Get default settings

--wds-get-autoconnect-settings
    Get autoconnect settings

--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]
    Set autoconnect settings (roaming settings optional)

--wds-get-supported-messages
    Get supported messages

--wds-reset
    Reset the service state

--wds-bind-mux-data-port=["key=value,..."]
    Bind qmux data port to controller device (allowed keys: mux-id, ep-iface-number) to be used with `--client-no-release-cid'

--wds-set-ip-family=[4|6]
    Set IP family

--wds-get-channel-rates
    Get channel data rates

--wds-noop
    Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options

--pbm-get-all-capabilities
    Get all phonebook capabilities

--pbm-noop
    Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

PDC options

--pdc-list-configs=[(platform|software)]
    List all configs

--pdc-delete-config=[(platform|software),ConfigId]
    Delete config

--pdc-activate-config=[(platform|software),ConfigId]
    Activate config

--pdc-deactivate-config=[(platform|software),ConfigId]
    Deactivate config

--pdc-load-config=[Path to config]
    Load config to device

--pdc-noop
    Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options

--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]
    Set PIN protection

--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
    Verify PIN

--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
    Unblock PIN

--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]
    Change PIN

--uim-read-transparent=[0xNNNN,0xNNNN,...]
    Read a transparent file given the file path

--uim-get-file-attributes=[0xNNNN,0xNNNN,...]
    Get the attributes of a given file

--uim-read-record=["key=value,..."]
    Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,...])

--uim-get-card-status
    Get card status

--uim-get-supported-messages
    Get supported messages

--uim-sim-power-on=[(slot number)]
    Power on SIM card

--uim-sim-power-off=[(slot number)]
    Power off SIM card

--uim-change-provisioning-session=["key=value,..."]
    Change provisioning session (allowed keys: session-type, activate, slot, aid)

--uim-reset
    Reset the service state

--uim-noop
    Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

WMS options

--wms-get-supported-messages
    Get supported messages

--wms-reset
    Reset the service state

--wms-noop
    Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options

--wda-set-data-format=["key=value,..."]
    Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-datagram-max-size, dl-max-datagrams, ep-type (undefined|hsusb), ep-iface-number)

--wda-get-data-format
    Get data format

--wda-get-supported-messages
    Get supported messages

--wda-noop
    Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

VOICE options

--voice-get-config
    Get Voice service configuration

--voice-get-supported-messages
    Get supported messages

--voice-noop
    Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'

LOC options

--loc-session-id=[ID]
    Session ID for the LOC session

--loc-start
    Start location gathering

--loc-stop
    Stop location gathering

--loc-get-position-report
    Get position reported by the location module

--loc-get-gnss-sv-info
    Show GNSS space vehicle info

--loc-timeout=[SECS]
    Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info' (default 30s)

--loc-follow-position-report
    Follow all position updates reported by the location module indefinitely

--loc-follow-gnss-sv-info
    Follow all GNSS space vehicle info updates reported by the location module indefinitely

--loc-follow-nmea
    Follow all NMEA trace updates reported by the location module indefinitely

--loc-delete-assistance-data
    Delete positioning assistance data

--loc-noop
    Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'

QoS options

--qos-get-flow-status=[QoS ID]
    Get QoS flow status

--qos-get-network-status
    Gets the network status

--qos-swi-read-data-stats=[APN ID]
    Read data stats (Sierra Wireless specific)

--qos-reset
    Reset the service state

--qos-noop
    Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'

GAS options

--gas-dms-get-firmware-list
    Gets the list of stored firmware

--gas-dms-get-active-firmware
    Gets the currently active firmware

--gas-dms-set-active-firmware=[index]
    Sets the active firmware index

--gas-noop
    Just allocate or release a GAS client. Use with `--client-no-release-cid' and/or `--client-cid'

  Application Options:

-d, --device=[PATH]
    Specify device path

-w, --get-wwan-iface
    Get the WWAN iface name associated with this control port

-e, --get-expected-data-format
    Get the expected data format in the WWAN iface

-E, --set-expected-data-format=[802-3|raw-ip]
    Set the expected data format in the WWAN iface

--get-service-version-info
    Get service version info

--device-set-instance-id=[Instance ID]
    Set instance ID

--device-open-version-info
    Run version info check when opening device

--device-open-sync
    Run sync operation when opening device

-p, --device-open-proxy
    Request to use the 'qmi-proxy' proxy

--device-open-qmi
    Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim
    Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto
    Open a cdc-wdm device in either QMI or MBIM mode (default)

--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]
    Open device with specific link protocol and QoS flags

--client-cid=[CID]
    Use the given CID, don't allocate a new one

--client-no-release-cid
    Do not release the CID when exiting

-v, --verbose
    Run action with verbose logs, including the debug ones

--silent
    Run action with no logs; not even the error/warning ones

-V, --version
    Print version

qmicli 1.24.6 Copyright © 2012-2019 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

SEE ALSO
The full documentation for qmicli is maintained as a Texinfo manual. If the info and qmicli programs are properly installed at your site, the command

    info qmicli

should give you access to the complete manual.