*******************************************************************************
Version 1.6.10
*******************************************************************************

2010-11-23 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Major bug fix in http_SendMessage.

	Currently, http_SendMessage was not able to write to write a buffer
	due to a bad use of file_buf instead of buf. This bug was introduced by
	the 0197-Doxygen-reformating-compiler-warnings patch.

2010-11-23 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Returning the Sid in Upnp_Event_Subscribe.

	Currently, Upnp_Event_Subscribe always contains an empty chain in the
	Sid parameter. This patch now saves the client Subscription ID in this
	parameter so Control Points can see and use the same SID in the
	Upnp_Event_Subscribe and in the Upnp_Event structures.

2010-11-22 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Two fixes from Juergen Lock <nox(at)jelal.kn-bremen.de>:

1. varargs:  pass size of CRLF as size_t not as int:

--- upnp/src/gena/gena_device.c.orig
+++ upnp/src/gena/gena_device.c
@@ -225,7 +225,7 @@ static UPNP_INLINE int notify_send_and_r
		"bbb",
		start_msg.buf, start_msg.length,
		propertySet, strlen(propertySet),
-		"\r\n", 2);
+		"\r\n", sizeof "\r\n" - 1);
	if (ret_code) {
		membuffer_destroy(&start_msg);
		sock_destroy(&info, SD_BOTH);

2. Remove "b" arg here, there is no buffer passed:  (this caused a pointer
to be interpreted as a buffer size to be alloc'd/copied, hence the 32 GB.)

--- upnp/src/genlib/net/http/webserver.c.orig
+++ upnp/src/genlib/net/http/webserver.c
@@ -1262,7 +1262,7 @@ static int process_request(
			// Content-Range: bytes 222-3333/4000  HTTP_PARTIAL_CONTENT
			// Transfer-Encoding: chunked
			if (http_MakeMessage(headers, resp_major, resp_minor,
-				"R" "TLD" "s" "tcS" "b" "Xc" "sCc",
+				"R" "TLD" "s" "tcS" "Xc" "sCc",
				HTTP_OK,    // status code
				finfo.content_type, // content type
				RespInstr,  // language info

2010-11-15 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Added the convenience function UpnpResolveURL2() to upnptools.c.

	This function avoids some unecessary memory allocation.
	The memory alloc'd by this function must be freed later by the caller.

2010-11-10 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Add GENA_NOTIFICATION_xxx_TIMEOUT variable.

	Currently, in notify_send_and_recv function, pupnp waits for
	HTTP_DEFAULT_TIMEOUT seconds when trying to send a GENA notification.
	When there is a lot of notifications with CPs which was disconnected
	without unsusbcribing, all the pupnp threads are blocked on this
	timeout. To correct, this issue, this patch adds a new variable,
	GENA_NOTIFICATION_SENDING_TIMEOUT, which can be used to lower the
	timeout so GENA threads return quickly when writing is impossible. By
	the same mean, pupnp waits the CP's answer to the NOTIFY for
	HTTP_DEFAULT_TIMEOUT seconds, so this patch adds a new variable,
	GENA_NOTIFICATION_ANSWERING_TIMEOUT, to customize this value.

2010-11-10 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Add --disable-blocking-tcp-connections flag.

	Currently, pupnp is using a blocking connect to sends GENA
	notifications. As a result, when there is a lot of notifications with
	CPs which were disconnected without unsusbcribing, all the pupnp
	threads are blocked for 20s (timeout). To correct this issue, this
	patch replace the call to connect with a call to private_connect and add
	a compilation flag to disable blocking TCP connections, so if we are not
	able to connect to the CP, the notification is lost.

2010-11-07 Stefan Sommerfeld <zerocom(at)cs.tu-berlin.de>

	Several patches for windows compatibility and fixing warnings.

2010-11-07 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	PTHREAD_MUTEX_RECURSIVE on DragonFly is an enum.

	SF Bug Tracker - ID: 3104527
	Submitted: OBATA Akio ( obache ) - 2010-11-07 07:10:28 BRST

	In threadutil/inc/ithread.h, it is expected that
	PTHREAD_MUTEX_RECURSIVE is defined as macro. But on DragonFly BSD,
	it is defined as enum, so not works as expected.

	Attachment patch treat that DragonFly BSD always
	have PTHREAD_MUTEX_RECURSIVE.

2010-11-07 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	ftime(3) in -lcompat should not be checked.

	SF Bug Tracker - ID: 3104521
	Submitted: OBATA Akio ( obache ) - 2010-11-07 07:03:44 BRST

	In configure.ac
	AC_CHECK_FUNCS(ftime,, [AC_CHECK_LIB(compat, ftime)])

	But since version 1.6.3, ftime(3) is not used, so it should be
	removed, or introduce unwanted linkage with -lcompat.

*******************************************************************************
Version 1.6.9
*******************************************************************************

2010-11-06 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Fix for bug introduced in samples code in svn revision 502, commit
	git:25c908c558c8e60eb386c155a6b93add447ffec0

	Sample device and combo were aborting with the message:
	"***** SampleUtil_Initialize was called multiple times!"

2010-11-06 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Make multiple SSDP advertisements faster.

	Put the loop to send multiple copies of each SSDP advertisements in
	ssdp_server.c instead of ssdp_device.c so we have only one call to
	imillisleep ( SSDP_PAUSE ) to speed up advertisements.

2010-11-05 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Removing unused NUM_COPY variable.

	Previously, NUM_COPY was used in ssdp_device.c to send multiple copies 
	of each advertisements but also multiple replies to each M-SEARCH
	request. As sending multiple replies is not compliant with HTTPU/MU
	spec, NUM_COPY has been set to 1 in an older patch. However, as this
	variable is not needed and has been replaced with SSDP_COPY, it has
	been removed.

2010-11-05 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Use SSDP_COPY to send multiple SSDP advertisements.

	Currently, SSDP_COPY is used only to send multiple M-SEARCH requests (in
	ssdp_ctrlpt.c). With this patch, SSDP_COPY is also used to send multiple
	copies of each advertisements packets (in ssdp_device.c).

2010-11-01 Carl Benson <carl.benson(at)windriver.com>

	Fix for Android build.

	I had to do some modifications myself though, because the Android
	build system insists on having a file named "util.h" taking precedence
	in its include path, libupnp gets confused because of the same filename
	in upnp/src/inc/util.h

*******************************************************************************
Version 1.6.8
*******************************************************************************

2010-10-20 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Fix a long date memory leak in webserver.c:StrStr().

2010-10-19 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Bug fix in select of miniserver.c
	
	Fix a bug in miniserver.c, in which maxMiniSock was wrongly declared as
	unsigned int and as a result it was beeng set to ((unsigned int)(-1)).
	As a result, after beeing incremented, it became zero, and this value
	was beeing used in the select() call.

	Thanks to Fabrice Fontaine for helping and testing with this issue.

2010-10-15 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net>

	Fix for 100% CPU issue in select() in miniserv.c. I have also removed
	the sleep() call, it was just a workaround.

	SF Bug Tracker [ 3086852 ] 99% CPU loop in miniserver.c on a non ipv6
	system.

	Submitted by: Jin ( jin_eld ) - 2010-10-13 19:29:13 UTC

	I cross compiled libupnp 1.6.7 for ARM9 using the --disable-ipv6
	option, my system is an ipv4 only setup.

	I do not know why this problem only appears when running the app in the
	background (for instance using nohup &), but then it starts using 99%
	CPU.

	I traced the problem down to the select() call in miniserver.c in the
	RunMiniServer() function. Select returns code 1, but errno is set to
	"Socket operation on non-socket", I also see this when running my app
	under strace.

	I set all ...Sock6 variables to INVALID_SOCKET to make sure that they
	do not get added to the FD_SET and the problem is gone.

*******************************************************************************
Version 1.6.7
*******************************************************************************

2010-10-01 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Adding --disable-notification-reordering option

	Adding a configure flag to disable GENA notification reordering as even
	with an imillisleep(1), this mechanism consumes too much CPU on embedded
	devices when there is a burst of notifications.

2010-09-30 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Bug fix when there is no service in embedded devices

	When a device with embedded devices (like IGD) when created and one of
	the embedded devices did not have any service, there was a Segmentation
	Fault (see SF Tracker [ 2688125 ]).

	Original SF Tracker issue follows:

	SF Tracker [ 2688125 ] v1.6.6 crashes on subdevices without services
	Submitted by: Arno Willig ( akw ) - 2009-03-15 22:45:23 BRT

	I discovered a bug, which will make libupnp (1.6.6) segfault, when you
	create a upnp description document with multiple devices which have
	subdevices, but no own services.

	The crash occurs in genlib/service_table.c in line 977:
	end->next =
		getServiceList( currentDevice, &next_end, URLBase );

	In this case "end" seems not to be defined, so end->next crashes.

	Can anyone confirm this, please?

2010-09-28 Marc Essayan <marc.essayan(at)orange-ftgroup.com>

	Bug fix on burst of GENA notification

	When a lot of notifications were generated by a device in a short
	period of time then 100% of the CPU was used to reorder those
	notifications by pushing back the thread in the job queue. This
	mechanism has been modified so now thread sleep 1 ms before being
	pushed back into the job queue.

	Removing DEFAULT_SCHED_PARAM parameter and use
	sched_get_priority_min(DEFAULT_POLICY) instead.

2010-09-22 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Bug fix on M-SEARCH response

	Devices must respond to M-SEARCH requests for any supported version and the
	response should specify the same version as was contained in the search target.
	Previously, the device did not answer if the M-SEARCH request did not
	contain the same version number than the version number of the device.

2010-09-21 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Add Content-Language iff Accept-Language

	Add Content-Language header in the response if and only if there is an
	Accept-Language header in the request.

2010-09-21 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Addition of WEB_SERVER_CONTENT_LANGUAGE parameter

	This patch adds the WEB_SERVER_CONTENT_LANGUAGE parameter so the user can specify
	the language used by the device during Description and Presentation steps of UPnP
	through the HTTP CONTENT-LANGUAGE header.
	By default, the WEB_SERVER_CONTENT_LANGUAGE is an empty string so no
	CONTENT-LANGUAGE is added.

2010-09-18 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Customize the stack size of the threads used by pupnp through the new
	THREAD_STACK_SIZE variable.

	This patch allows a user to customize the stack size of the threads used by
	pupnp through the new THREAD_STACK_SIZE variable. This is especially useful
	on embedded systems with limited memory where the user can set THREAD_STACK_SIZE
	to ITHREAD_STACK_MIN.

	However, as this modification can have side effects, I set 0 as the default
	value, so threads will continue to use the default stack size of the system
	(which varies greatly as stated in
	https://computing.llnl.gov/tutorials/pthreads/).

2010-09-16 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com>

	Broken IPv6.
	IPv6 is currently broken in latest release of branch-1.6.x, so find a
	patch attached that correct the issue (small fixes on define, undef and
	retVal).

2010-09-10 Warwick Harvey <warwick.harvey(at)tieto.com>
	Patch to take notice of UPNP_USE_RWLOCK flag

	The configure.ac file included with UPnP checks for the presence of the
	pthread_rwlock_t type, and then sets the value of the UPNP_USE_RWLOCK
	flag appropriately.  However, this flag is not referenced at all in the
	source code, and thus the code does not compile on systems that don't
	have the pthread_rwlock_t type (such as Android).
	
	Please find attached a patch (against the current 1.6.x head) that checks
	the value of this flag and falls back on using mutexes if read-write
	locks are not available.

2010-09-10 Jean Sigwald <jean.sigwald(at)orange-ftgroup.com>
	I discovered a reliable denial-of-service issue on the last stable
	release of libupnp (1.6.6) remotely triggerable by any
	unauthenticated user. The issue is related with a bad parsing of
	malformed XML.

2010-09-10 Chandra Penke <chandrapenke(at)mcntech.com>
	* SF Patch Tracker [ 2854711 ] Patch for Solaris10 compilation and usage
	Submitted By: zephyrus ( zephyrus00jp )
	
	Patch for Solaris10 compilation and usage.

2010-09-10 Chandra Penke <chandrapenke(at)mcntech.com>
	Add support for conditionally enabling ipv6.

2010-09-10 Chandra Penke <chandrapenke(at)mcntech.com>
	Fix for compilation in debug builds.

	Ensure internal methods are declared as static since debug builds don't inline.

2010-09-09 Chandra Penke <chandrapenke(at)mcntech.com>
	Fix for regression in SSDP code to send/receive messages over UDP

	Sending messages over UDP is broken in some Apple OSes
	such as OS X and iOS. This might be broken in other OSes to but didn't
	verify.

	The fix is to modify the socket lenght argument of sendto to use the correct
	sockaddr lenght dependng on whether the socket is IPV4 or IPV6.

	Also added some error checks and debugging related to the issue

2010-09-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	Using UpnpReadHttpGet to download large files causes the application to
	crash. This happens when the file being downloaded exceeds the device
	memory - entirely possible when transferring video files.
	The programmatic cause is that the logic implemented in the function
	http_ReadHttpGet (which UpnpReadHttpGet calls) reads the entire file
	into memory. The fix modifies the existing logic to discard data after
	it's been read; there's no reason to keep it around since the caller
	of UpnpReadHttpGet already has a copy of it.
	
	This issue exists in 1.6.6 as well as the latest sources.

	Patch submitted by Chandra (inactiveneurons).

2010-09-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	In the latest sources, http_RequestAndResponse and other methods that
	use connect() are broken. More specifically, connect() in these methods
	is returning with an EINVAL. The programatic cause is that the address_len
	argument passed to connect() is different in IPV4 vs IPV6 (as described in:
	http://www.opengroup.org/onlinepubs/009695399/functions/connect.html).
	The current code always uses the IPV6 size. The fix modifies each use of
	connect() to use the correct size based on the address family being used.

	Patch submitted by Chandra (inactiveneurons).

2010-09-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	Fix compilation error in upnp/src/gena/gena_ctrlpt.c (this is most
	likely an error on all platforms).

	Patch submitted by Chandra (inactiveneurons).

2010-09-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	Fix compilation error in upnp/src/inc/ssdplib.h when compiling in OS X
	(the netinet/* headers are not available).

	Patch submitted by Chandra (inactiveneurons).

2010-09-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	Fix compilation error in ixml/inc/ixml.h when compiling with an
	Objective-C compiler (when cross-compiling for iPhone devices).

	Patch submitted by Chandra (inactiveneurons).

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Issue regarding the GENA notifications. A string termination indicator
	was added at the end of the notification ("\r\n") in
	notify_send_and_recv() in upnp/src/gena/gena_device.c.
	Patch by Fabrice Fontaine.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* The last part of Ronan Menard's patch.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* upnp/src/ssdp/ssdp_device.c: Fix for IPV6 ULA/GUA issues.
	* upnp/src/ssdp/ssdp_ctrlpt.c: Fix for IPV6 ULA/GUA issues.
	* upnp/src/ssdp/ssdp_server.c: Fix for IPV6 ULA/GUA issues.
	
	Patch submitted by Ronan Menard.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* upnp/src/genlib/miniserver/miniserver.c: Fix for IPV6 ULA/GUA issues.
	
	Patch submitted by Ronan Menard.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* gena_subscribe(): Fix for IPV6 ULA/GUA issues.
	
	Patch submitted by Ronan Menard.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SOCKET ssdpSock6UlaGua: created variable for later use.
	
	Patch submitted by Ronan Menard.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SSDP_IPV6_SITELOCAL: new macro.
	
	Patch submitted by Ronan Menard.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* The scope of the macro NUM_HANDLE is now restricted to upnpapi.c.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* InitHandleList() has never been implemented, I guess no one has ever
	called it, so remove it.
	* GetFreeHandle() and FreeHandle() are now static as they should.

2010-08-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* New internal buffer added to store global/ula IPV6 address.
	* Macros to test whether an IPV6 address is global or ula.
	* UpnpGetServerUlaGuaIp6Address(): added interface.
	* IN6_IS_ADDR_GLOBAL, IN6_IS_ADDR_ULA: new macros.
	* gIF_IPV6_ULA_GUA: new buffer.
	* UpnpRegisterRootDevice3(): Change to the test of already registered
	devices for IPV6.
	* UpnpGetIfInfo(): gua/ula issues.
	
	Patch submitted by Ronan Menard.

2010-08-19 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* libUPnP does support IPV6 now.
	
	Patch submitted by Ronan Menard.

2010-08-19 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* HTTP version equal to 1.0 should fail as required by the UPnP
	certification tool. Patch submitted by Ronan Menard.

2010-06-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	SF Bug Tracker [ 3022490 ] String declaration fix for patch applied in 3007407
	Hello,

	When my patch for tracker ID 3007407 was accepted, the definition of the
	serviceList string was changed from

	#define SERVICELIST_STR "serviceList"

	to

	static const char *SERVICELIST_STR = "serviceList";

	During internal code review of the final patch, it was pointed out that 
	sizeof(SERVICELIST_STR) == 4 since SERVICELIST_STR is now declared as
	a pointer instead of an array.

	If you wish to use a variable instead of a define, I suggest the
	following instead:

	static const char SERVICELIST_STR[] = "serviceList";

	Thanks,
	Chuck Thomason

2010-06-10 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	SF Bug Tracker [ 3007407 ] Service traversal issue in AdvertiseAndReply()
	Submitted: Chuck Thomason ( cyt4 ) - 2010-05-26 15:07:39 UTC

	When the UPnP server is started, one alive message is broadcast for each
	service in each device. It appears that libupnp's implementation of the
	alive message generation does not correctly navigate the XML description
	document when locating the services. This can result in the wrong UDN
	being used in the alive message sent for a service.

	In my specific case (see attached XML), the root EchoSTB device contains
	no services, but its embedded MediaServer device contains 2 services.
	When the existing libupnp code traverses the EchoSTB device in the XML,
	it searches the global list of serviceLists within the document instead
	of searching for a serviceList that is its direct child node. The
	ContentDirectory and ConnectionManager services are then announced with
	the UDN of EchoSTB1 (the root device) instead of with the UDN of
	MediaServer, which is actually their parent device.

	I discovered this behavior using libupnp-1.6.6. I have generated a patch
	against branch-1.6.x that corrects the XML navigation such that all
	services are traversed from their parent device, which results in the
	correct UDN being sent in the alive message for each service. I built
	from branch-1.6.x without this patch, tested, and confirmed that the
	issue still exists as I observed it in libupnp-1.6.6. I then built
	from branch-1.6.x with this patch, tested, and confirmed that the
	issue was resolved.

	Thanks,
	Chuck Thomason

2010-05-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	SF Bug Tracker [ 2995758 ] libupnp 1.6.6, wrong bind when reuseaddr is
	1.
	Submitted: viallard anthony ( homer242 )
	When trying to use reuseaddr option in miniserver/miniserver.c, there
	isn't a affectation of the port chosen (serverAddr.sin_port isn't
	receive listen_port variable value).

2010-04-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	Define PROTOTYPES to be one by default in global.h. This affects the
	RSA MD5 code.

2010-03-27 Nick Leverton <nick@leverton.org>
	Subscription auto-renewals copy the renewal time from old subscription.

2010-03-27 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added API to ithread, created the following functions:
	- int ithread_initialize_library(void);
	- int ithread_cleanup_library(void);
	- int ithread_initialize_thread(void);
	- int ithread_cleanup_thread(void);
	* SF Bug Tracker [ 2876374 ] Access Violation when compiling with Visual Studio 2008
	Submitted: Stulle ( stulleamgym ) - 2009-10-10 19:05

	Hi,

	I am one of the devs of the MorphXT project and I use this lib in some
	other of my projects, too. When I tried to upgrade the lib earlier for one
	of my projects I had to realise that something did not work at first and
	while most of the things were reasonably ease to be fixed. Now, the last
	thing I encountered was not so easy to fix and I am uncertain if my fix is
	any good so I'll just post it here and wait for some comments.

	The problem was that I got an Access Violation when calling "UpnpInit". It
	would call "ithread_rwlock_init(&GlobalHndRWLock, NULL)" which eventually
	led to calling "pthread_cond_init" and I got the error notice at
	"EnterCriticalSection (&ptw32_cond_list_lock);". It appeared that
	"ptw32_cond_list_lock" was NULL. Now, I found two ways to fix this. Firstly
	moving the whole block after at least one of the "ThreadPoolInit" calls
	will fix the issue. Secondly, you could add:
	#ifdef WIN32
	#ifdef PTW32_STATIC_LIB
	// to get the following working we need this... is it a good patch or
	not... I do not know!
	pthread_win32_process_attach_np();
	#endif
	#endif
	right before "ithread_rwlock_init(&GlobalHndRWLock, NULL)".

	Just so you know, I am using libupnp 1.6.6 and libpthreads 2.8.0 and both
	are linked static into the binaries. I am currently using Visual Studio
	2008 for development with Windows being the target OS. Any comment at your
	end?

	Regards, Stulle

2010-03-27 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2836704 ] Patch for Solaris10 compilation and usage.
	Submitted By: zephyrus ( zephyrus00jp )
	This second part covers the issue on linking with -lsocket -lnsl -lrt.

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 2392166 ] ithread_detach not called for finished worker thread
	Submitted: Ulrik ( ulsv_enea ) - 2008-12-05 08:24

	Valgrind reports a memory leak due to that the function ithread_detach is
	not called for finished worker threads in ThreadPool.c.

	==21137== 2,176 bytes in 8 blocks are possibly lost in loss record 5 of 5
	==21137== at 0x4C20F3F: calloc (vg_replace_malloc.c:279)
	==21137== by 0x4010F58: _dl_allocate_tls (in /lib/ld-2.6.1.so)
	==21137== by 0x544BA92: pthread_create@@GLIBC_2.2.5 (in
	/lib/libpthread-2.6.1.so)
	==21137== by 0x5F94592: CreateWorker (ThreadPool.c:639)
	==21137== by 0x5F95079: ThreadPoolInit (ThreadPool.c:784)

	I'm using libupnp 1.6.6

	For more info on pthread_detach, see:
	http://gelorakan.wordpress.com/2007/11/26/pthead_create-valgrind-memory-lea
	k-solved/

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 2392304 ] Memory leak in SSDP AdvertiseAndReply
	Submitted: Ulrik ( ulsv_enea ) - 2008-12-05 08:24

	Valgrind reports a memory leak function in AdvertiseAndReply
	(ssdp/ssdp_server.c) in libupnp 1.6.6

	There are continue statements in many places in AdvertiseAndReply. In some
	of those error handling cases the variable nodelist is not free'ed before
	continuing to the next iteration. The next iteration will take care of
	free'ing the nodelist from the previous iteration in most cases, but not
	when breaking out of the for loop after the last element.

	I belive this memory leak can be solved by makeing sure that the rows

	ixmlNodeList_free( nodeList );
	nodeList = NULL;

	are always executed, also in the beginning of the last iteration when we
	found out that there are not more elements.

	==29110== at 0x4C21C16: malloc (vg_replace_malloc.c:149)
	==29110== by 0x5D8DE0E: ixmlNodeList_addToNodeList (nodeList.c:106)
	==29110== by 0x5D8B7E2: ixmlNode_getElementsByTagNameRecursive
	(node.c:1438)
	==29110== by 0x5D8E587: ixmlElement_getElementsByTagName
	(element.c:491)
	==29110== by 0x5B6C0F1: AdvertiseAndReply (ssdp_server.c:201)
	==29110== by 0x5B7AB74: UpnpSendAdvertisement (upnpapi.c:1495)

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* libupnp and multi-flows scenario patch
	Submited by Carlo Parata from STMicroelectronics.

	Hi Roberto and Nektarios,
	after an analysis of the problem of libupnp with a multi-flows scenario, I
	noticed that the only cause of the freezed system is the ThreadPool
	management. There are not mutex problems. In practise, if all threads in the
	thread pool are busy executing jobs, a new worker thread should be created if
	a job is scheduled (I inspired to tombupnp library). So I solved the problem
	with a little patch in threadutil library that you can find attached in this
	e-mail. I hope to have helped you.

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2964973 ] install: will not overwrite just-created
	...blah... with...
	Submitted: Nick Leverton ( leveret ) - 2010-03-07 05:18

	Full error:
	/usr/bin/install: will not overwrite just-created
	`/tmp/buildd/libupnp-1.6.6/debian/tmp/usr/share/doc/libupnp3-dev/examples/s
	ample_util.c' with `common/sample_util.c'

	This seems to be from Automake 1.11 which doesn't like having duplicate
	files in a Makefile.am. Patch attached, kindly provided by Stefan Potyra
	for Debian (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543068)

	This fix will be needed for both 1.6.x and 1.8.x branches.

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Backport of svn revision 504:
	SF Patch Tracker [ 2969188 ] 1.8.0: patch for FreeBSD compilation
	Submitted By: Nick Leverton (leveret)
	Fix the order of header inclusion for FreeBSD.

2010-03-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2836704 ] Patch for Solaris10 compilation and usage.
	Submitted By: zephyrus ( zephyrus00jp )
	Obs by Marcelo: The issue with linking with -lsocket -lnsl -lrt is not
	covered in this changeset beacuse I don't have solaris to test. I will
	need some help from zephyrus in this regard. The issue will be addressed
	in a future changeset.

	Compilation for solaris

	I have used gcc3.x and gcc4.x under solaris 10 for x86 / 64 bits.

	A couple of Source file fixes were necessary for successful compilation
	and runtime behavior.

	threadutil/src/ThreadPool.c

	POSIX
	sched_setschduler() returns non-negative value for success.

	Without the fix, UpnpInit() fails immediately.

	upnpp/src/api/upnpai.c

	There is a typo of a macro name "__sun" in one of the
	CPP conditional.
	Without the fix, the compilation aborts due to unknown constant
	in socket ioctl call.

	A few structs and an array is not properly initialized.
	Well, I think it may be safe as is, but when I checked it
	using purify evaluation version, it was reported that
	uninitizlied iszBuffer may cause read of uninitialized memory.
	So play it safe.

	Configure issue.
	This has to be more of a configure magic.
	To link a program successfully using network, we need
	-lsocket and -lnsl library specifications on the link line.
	We also need -lrt for programs that use thread scheduling features.

	The sample program under upnp/sample requires
	-lsocket -lnsl -lrt
	for successful linking.
	I added -lsocket -lnsl -lrt to Makefile.in.
	configure probably needs to take care of these.

	I don't know much about configure, automake, etc., so
	I am just raising a flag here.

	TIA
	
2010-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2836704 ] Search for nested serviceList (not
	stopping at the first lis
	Submitted By: zephyrus ( zephyrus00jp )
	
	Internet Gateway Device description contains nested serviceList (rootdevice
	-> servicelist, subdevice
	and subdevice has the lower-level serviceList, etc..)

	Unfrotunately, the sample code sample_util.c used by tv_device sample,
	etc.
	has a code that looks for only the first top-level serviceList.
	This results in the failure to read all the services of an IGD xml
	description.

	Attached patch modifies this behavior and looks for the service by
	visiting all the serviceList in xml document in turn.

	With the modified patch (ad additional modification), I could
	simulate an IGD device and created a modified control program for that.

	Patch against 1.6.6

	TIA.
	
2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2203721 ] timeb.h check obsolete

2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2970872 ] Update ErrorMessages for latest return
	code list
	Submitted By: Nick Leverton ( leveret )
	
	ErrorMessage[] in upnptools.c has got a bit out of sync, the attached
	patch (generated from grep 'define UPNP_E_') should bring it up to date.

2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2857611 ] Declare a few functions to have proper
	(void) argument list.
	Submitted By: zephyrus ( zephyrus00jp )
	
	In a publicly installed headers, a few functions are declared without any
	arguments at all, a la "()".
	When I used gcc's -Wimplict and -Wstrict-prototypes to check for the
	mismatch of
	function prototype declarations and their usage in my own program,
	some headers from libupnp-1.6.6 produced warnings.

	They are not strictly bugs, but pretty much annoying. This is 2009, and
	almost all the important compilers
	understand ISO-C.

	So the offending functions are declared as "(void") to show that they have
	no arguments at all.

2010-03-14 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patch Tracker [ 2546532 ] Missing carriage return between
	SOAPACTION and User-Agent headers.

	There is something going wrong in soap_ctrlpt.c at line 931 (based on
	version 1.6.6 release).
	
	The http_Makemessage call looks as follows:
	
	if (http_MakeMessage(
	&request, 1, 1,
	"Q" "sbc" "N" "s" "s" "Ucc" "sss",
	SOAPMETHOD_POST, path.buf, path.length,
	"HOST: ", host.buf, host.length,
	content_length,
	ContentTypeHeader,
	"SOAPACTION:
	\"urn:schemas-upnp-org:control-1-0#QueryStateVariable\"",
	xml_start, var_name, xml_end ) != 0 ) {
	return UPNP_E_OUTOF_MEMORY;
	}
	
	This will result in the SOAPACTION header to be immediately followed by the
	User-Agent header, while a cr-lf should separate the two. I propose to fix
	this by changing the second "s" to "sc" to force the addition of a cr-lf
	after the SOAPACTION. This looks consistent to the other Makemessage calls.

2009-03-06 Oxygenic <oxygenic(at)users.sourceforge.net>
	* parameter problem fixed in soap_request_and_response(), 2nd call to
	http_RequestAndResponse() was wrong (thanks to Kim Kyungsan)

2008-07-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added upnp/m4/libupnp.m4 to the distribution tarball.

2008-07-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a missing HandleUnlock() in upnp/src/gena/gena_device.c.

2008-07-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 2026431 ] pupnp does not build on GNU/KfreeBSD.
	Submitted By: Nick Leverton - leveret
	Gnu/KFreeBSD is one of the Debian architectures, it includes a FreeBSD
	kernel with GNU userspace (glibc etc). The Gnu/KfreeBSD developers
	provided the attached patch to test the appropriate #define and allow pupnp
	to build in their environment, and asked me to forward it to you.

	Since the test is a simple check for defined(__GLIBC__), this would
	presumably also help with other ports of GNU libc to non-Linux kernels.

2008-07-16 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Andre Sodermans (wienerschnitzel) patch for building libupnp under
	windows systems with VC9. This one fixes a missing include.

2008-06-30 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added an m4 macro to deal with finding libupnp in the users'
	configure script.

2008-06-11 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a buffer overflow due to a bug in the calculation of the
	CONTENT-TYPE header line size, the length was beeing calculated with
	the wrong string, there was a missing colon.

2008-06-02 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1942285 ]
	UpnpCreatePropertySet can leak memory.
	Submitted By: Bob Ciora - bobciora

	In file upnp/src/api/upnptools.c, function UpnpCreatePropertySet can leak
	memory if no additional arguments are passed. This is because of the
	'return' statement at (or near) line 554.

	The prior call to ixmlParseBufferEx may succeed. This causes a basic ixml
	tree to be created. The return statement at line 554 leaves this tree in
	memory without cleaning it up.

	There are two options: either add code prior to the return at 554 to clean
	up the tree, or simply allow a NumArg parameter of 0 to be passed.

	I prefer the second method -- there doesn't seem to be any need to pass
	*any* arguments to this function.

	In my local copy of upnptools.c, I have simply replaced the "return NULL"
	in line 554 to "return PropSet".

	I've attached the source file.

2008-05-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1903069 ]
	Subs (not services) not marked 'active'
	Submitted By: Bob Ciora - bobciora

	If the UpnpAcceptSubscription is not called, the subscription is not marked
	as "active", so no state variables will ever be sent.

	I have a "lazy" architecture where a service may not be ready to publish
	any state data at the time of a subscription. Subscriptions are still
	accepted, there's just nothing to send, so UpnpAcceptSubscription is never
	called. As a result, the subscription is never marked as "active" via the
	genaInitNotify functions.

	A best course of action would be to modify UpnpAcceptSubscription<...>
	functions so that they can accept *no* initial state information, but can
	still result in the subscription being marked as active. Technically,
	then, the "active" flag should be set here, not in the genaInitNotify<...>
	functions.

	But the UpnpAccept functions don't muck with the subscription table, and
	it's more work than it's worth to move that code from the gena fucntions to
	the upnpapi functions.

	So--- what I've done to correct this problem is to modify both
	UpnpAcceptSubscription<...> functions (in upnppapi.c) to accept an empty
	state list and still call the gena layer functions. The gena layer
	genaInitNotify<...> functions (gena_device.c) then mark the subscription as
	"active" *before* checking for an empty state set.

	In genaInitNotify, a check for "var_count <= 0" is added immediately after
	the "subs->active = 1;" line. If this occurs, then all cleanup is
	performed and the function returns GENA_SUCCESS (since now, an empty state
	list is not an error). The same check is made for "PropSet == 0" in
	genaInitNotifyExt (just after the "subs->active = 1;" line).

	I've modifified my proxy layer to call UpnpAcceptSubscriptionExt even when
	there is no state data to send. With the suggested changes to
	gena_device.c, later state changes are sent correctly.

	This has solved my problem.

2008-04-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fix in function SetSeed() in threadutil/src/ThreadPool.c for CYGWIN
	compilation. Thanks to Gary Chan.

*******************************************************************************
Version 1.6.6
*******************************************************************************

2008-04-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added thread id's to the UpnpPrintf debug messages. Thanks to
	Charles Nepveu for the idea.

2008-04-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	*  SF Bug Tracker [ 1948586 ]
	Uppercase U in in "xmlns:U" in Invoke Action causes seg. f.
	Submitted By: Thomas Norheim - kjakan_no
	Device no longer segfaults with the following malformed xml action:
	<u:SetColor xmlns:U="urn:schemas-upnp-org:service:tvpicture:1">
		<Color>2</Color>
	</u:SetColor>

2008-04-23 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Use -O0 in debug builds so that variables do not get optimized out.

2008-04-10 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Apostolos Syropoulos changes for OpenSolaris x86.

2008-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Andre Sodermans (wienerschnitzel) patch for building libupnp under
	windows systems with VC9.

2008-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Andre Sodermans (wienerschnitzel) patch for building libupnp under
	windows systems with VC8.

2008-03-08 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a printf format problem on the upnp_tv_device.c from both
	upnp/sample/tvdevie and upnp/sample/tvcombo directories. The variable
	port was a short int instead of an unsigned short and it was beeing
	print as a negative value.

2008-03-08 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1902668 ] Cannot compile on MSVC
	Submitted By Luke Kim - nereusuj
	Version 1.6.5 cannot be compiled because of some changes in 1.6.3.
	MSVC does not support stdint.h, gettimeofday(), sys/param.h, const int
	variables in array size and Windows does not define _WINDOWS_ but define
	_WINDOWS.
	* MSVC does not understand "const int"'s as declarators of array
	dimensions, we must use #define'd constants.
	* Use WIN32 instead of _WINDOWS_ or _WINDOWS.

2008-02-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* No longer ignore "upnp:rootdevice" advertisement. Thanks to Bob Ciora.

2008-02-10 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Changed "sys_errlist[errno]", which is deprecated, by
	"strerror_r()", which is thread safe.

2008-02-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Slightly improved error report by showing the sys_errlist string
	corresponding to errno.

2008-02-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Got rid of two useless constants: UPNP_SOCKETERROR and
	UPNP_INVALID_SOCKET. They both mean the same, that a network API
	function has failed. -1 is the value to check, not an invented constant.

*******************************************************************************
Version 1.6.5
*******************************************************************************

2008-02-02 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Peter Hartley's fix for wrong sized variable beeing passed to
	http_MakeMessage() on 64 bit architectures.


*******************************************************************************
Version 1.6.4
*******************************************************************************

2008-01-23 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Workaround for a problem with the new automake AM_CONDITIONAL macro
	from autotools-1.10. Thanks to Ingo Hofmann for helping with debugging
	this one.

2008-01-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added quoting to macros AC_CONFIG_AUX_DIR, AC_CONFIG_MACRO_DIR and
	AC_CONFIG_SRCDIR in configure.ac. Also changed the name of the
	auxiliary directory in AC_CONFIG_AUX_DIR to build-aux.

2008-01-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fix for setsockopt() in Threadpool.c to allow more than one process
	to join the multicast-group on OSX. Thanks to Ingo Hofmann.

2008-01-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Using defined(__OSX__) || defined(__APPLE__) instead of just
	defined(__OSX__) in the code. Thanks to Ingo Hofmann and Chris
	Pickel.

2008-01-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fix for isFileInVirtualDir. Thanks to Peter Hartley for the patch.

2008-01-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Putting back a "defined(__OSX__)" that has been removed in the
	previous *BSD patch. Thanks to Chris Pickel for pointing it out.

2008-01-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Patches Tracker [ 1865812 ] typo in docs comment
	Submitted By: Hartmut Holzgraefe - hholzgra
	typo in docs comment ACCAPTED instead of ACCEPTED in
	@name UPNP_E_UNSUBSCRIBE_UNACCAPTED [-302]
	Also, the documentation file name was mispelled and was corrected in
	the Makefile.am.

*******************************************************************************
Version 1.6.3
*******************************************************************************

2007-12-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Using pthread flags for the whole project, not just at the places
	individually indicated by several Makefile.am files spread all over
	the directories. That was too much error prone.

2007-12-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added a configure test to check if pthread_rwlock_t is available.
	Define _GNU_SOURCE if needed. The fallback behaviou will only be
	implemented if _GNU_SOURCE prooves to be insufficient on some
	platforms. Thanks to Jonathan Casiot (no_dice) and Robert Gingher
	(robsbox).

2007-12-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Removed unused iasnprintf.{c,h} files.

2007-12-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Removed STATSONLY() macro from ThreadPool.{c,h}.
	* Removed time() usage from ThreadPool.c.
	* Fixed STATS = 0 compilation.

2007-12-16 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Library was not compiling on FreeBSD 7. Code now no longer uses
	ftime(), using gettimeofday() instead. Thanks to Josh Carroll.


*******************************************************************************
Version 1.6.2
*******************************************************************************

2007-12-10 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a compilation error due to a missing #ifdef in
	upnp/src/genlib/miniserver/miniserver.c. Thanks to Eugene Christensen.

2007-11-12 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* "make check" was failing because ixml/test/test_document.sh did not
	have the executable flag set. Thanks to Steve Bresson.

2007-11-12 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a memory leak in upnpapi.c to delete gMiniServerThreadPool in
	the call to UpnpFinish(). Thanks to Fabrice Fontaine.

2007-11-09 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added a isleep() call to the error handler of select() in
	RunMiniServer(), so that it does not take 100% cpu in case select()
	fails repeatedly.

*******************************************************************************
Version 1.6.1
*******************************************************************************

2007-11-07 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1825278 ] AdvertiseAndReply sleeps with handle lock out
	Applied patch from Alex (afaucher) to change some write locks to read
	locks.

2007-11-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Adjusting libtool library numbers to reflect the last changes.

2007-11-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1825278 ] AdvertiseAndReply sleeps with handle lock out
	GlobalHndMutex, which was a mutex is now GlobalHndRWLock, which is a
	rwlock. HandleLock() is mapped to HandleWriteLock() while all other
	instances have not been checked. One instance in AdvertiseAndReply()
	has been changed to HandleReadLock(). Thanks to Alex (afaucher) for the 
	bug report and suggestions.

2007-11-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added support for rwlocks.

2007-11-05 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1825929 ] woker thread still alive after UpnpFinish()
	Submitted By: Luke Kim - nereusuj
	Worker thread still alive after calling UpnpFinish() because
	ThreadPoolShutdown() is in the #ifdef DEBUG block.
	421
	422 #ifdef DEBUG
	423 ThreadPoolShutdown( &gSendThreadPool );
	424 ThreadPoolShutdown( &gRecvThreadPool );

2007-08-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Changed the calls to virtualDirCallback.open(filename, UPNP_WRITE)
	to (virtualDirCallback.open)(filename, UPNP_WRITE) (notice the
	parenthesis) due to a change in glibc that produces compilation
	errors.

2007-08-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Initialization of the "randomness" struct so that valgrind does not
	complain.

2007-08-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Merge of patch submitted By Keith Brindley - brindlk
	SF Bug Tracker [ 1762758 ] Seek not working for large files
	Problem:
	Requests from the uPnP client to seek to a position beyond 2GB in a large
	file are handled as a request to see from the 2GB point.

	Impact:
	Varies depending on client. The Xbox 360 kills the connection when it
	realises.

	Solution:
	GetNextRange function (webserver.c) is updated to handle large file sizes.
	Fix should also recognise when built on a 32bit platform rather than 64 and
	handle accordingly.

2007-08-05 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Merge of Mac OS X patch from Stéphane Corthésy (davelopper),
	SF Bug Tracker [ 1686420 ] Modifications for MacOSX.
	Some of the proposed changes were already done by Rene Hexel's patch.

*******************************************************************************
Version 1.6.0
*******************************************************************************

2007-06-10 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* More fixes to Mac OS X and NetBSD from Rene Hexel:
	[pupnp-devel] NetBSD & Mac OS X packages and patches

	  Okay, I found a couple more things.  I have attached a patch file
	against the trunk (version 206) that make the repository code compile
	and run on both Mac OS X and NetBSD.

	This fixes the following issues:

	   upnp/src/api/upnpapi.c: SIOCGIFCONF didn't work properly, use
	getifaddrs() instead (on BSD systems).

	  threadutil/src/ThreadPool.c: priorities only work if
	_POSIX_PRIORITY_SCHEDULING is defined (and greater than 0).

	  threadutil/src/LinkedList.c and threadutil/src/iasnprintf.c: use
	stdlib.h instead of malloc.h on all BSD systems (not just FreeBSD).
	This is important, because malloc.h does not exist on Darwin/Mac OS X.

	  Cheers
	      ,
	   Rene

2007-06-09 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* [pupnp-devel] NetBSD & Mac OS X packages and patches.
	Rene Hexel's <rh@netbsd.org> patch to compile in NetBSD and Mac OS X.

2007-05-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Updated the macro files acx_pthread.m4, ax_cflags_gcc_option.m4,
	ax_cflags_warn_all.m4, m4/ax_cflags_warn_all_ansi.m4,
	m4/type_socklen_t.m4.

2007-05-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed an issue with the instalation of the file upnpdebug.h. Since
	the last modifications that removed the macro DEBUV_ONLY, this file
	must be installed even on a non-debug build.

2007-05-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Bug Tracker [ 1711325 ] Bad DestAddr in Upnp_Discovery structure
	Submitted By: Bob Ciora
	The field DestAddr of the structure Upnp_Discovery is now a full
	SOCKADDRIN instead of a pointer to SOCKADDRIN. Commented code sugests
	that in a previous moment, the function ssdp_handle_ctrlpt_msg() did
	not use a postponed thread to call ctrlpt_callback(). Now the code
	uses a thread, and most probably the original data would get lost and
	the pointer would point to an invalid memory region. This fix caused
	an interface change in the library and the minor library version was
	bumped. Also, the libtool library numbers were changed accordingly.

*******************************************************************************
Version 1.4.7
*******************************************************************************

2007-05-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added support for the Basic Device
	(http://www.upnp.org/standardizeddcps/basic.asp) as suggested by
	Titus Winters.

2007-05-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed the file libupnp.pc.in to generate a correct path for the
	include files.

2007-05-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Removing the Dbg_Level, InitLog, SetLogFileNames and CloseLog
	defines. These were just aliases, no reason to keep them.

2007-05-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Changed the comments of the include files that expose the UPnP API
	to use only C89 comments and no C99 comments.

2007-05-24 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>
	* Added tvcombo sample that demonstrates coexistence of a device and a
	control point in the same application.

2007-05-24 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>
	* SF Tracker FR [ 1570020 ].
	* Enable both device and control point in the same application. Resolve
	deadlock in the SSDP processing threads.
	* Fix Threadpool expansion condition.
	Thanks to Siva Chandran P. for the original patch.

2007-05-24 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>
	* Modified tvdevice (control and picture) service descriptions to make
	compatible with WinXP/IE control point. 'in' arguments must appear before
	'out' arguments in argument list.
	Thanks to Martin Tremblay for pointing out the solution originally provided
	by MORIOKA Yasuhiro.

2007-05-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* More MSVC fixes, using XINLINE instead of inline, MSVC has troubles
	with inline. Thanks to David Maass for reporting.
	* Changed XINLINE to UPNP_INLINE.

2007-05-21 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added the file build/inc/msvc/inttypes.h. This file is for use with
	MSVC only, because it does not provide C99 compatibility.

2007-05-18 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Removed all uses of the DEVICEONLY(x) macro.

2007-05-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Removed all uses of the DBGONLY(x) macro. A static inline empty
	function now is used and the compiler takes care of optimizing it out.

2007-05-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fixed a bug in UpnpPrintf, function could call va_start() and return
	befor calling va_end().

2007-05-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* EXPORT_SPEC missing on some declarations in ixml/inc/ixml.h.
	Thanks to David Maass.

2007-05-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* sizeof is unsigned, so %zu is more adequate than %zd.

2007-05-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Using an invented printf directive PRIzu that on MSVC
	expands to "lu", and on normal C99 compilers expands to "zu".

2007-05-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Rewrote raw_find_str. Now it no longer uses strcasestr(), but it
	transforms the first input buffer into lowercase.

2007-05-08 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fix for debug printf format strings. size_t are not expected
	in a string format like "%.*s".

2007-05-08 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Added inttypes.h as a header requirement in configure.ac.

2007-05-11 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Moved upnp_tv_ctrlpt and upnp_tv_device executables from folder
	upnp to folder upnp/sample. Moved folder upnp/sample/tvdevice/web
	to folder upnp/sample/web. This way, if someone compiles the
	tarball and executes upnp_tv_device from its creation directory,
	there will be no error -108 for not finding directory web.

*******************************************************************************
Version 1.4.6
*******************************************************************************

2007-04-19 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Fix for freebsd host_os in configure.ac.

*******************************************************************************
Version 1.4.5
*******************************************************************************

2007-04-19 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* Case insensitive comparison in raw_find_str() (httpparser.c) as
	suggested by Craig Nelson in SF Tracker [ 1689382 ] DLINK DIR-625
	patch.

2007-04-07 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>
	* Fix for a bug in makeAction where va_arg was beeing called one
	extra time.

2007-04-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Tracker [ 1703533 ] Patch to make it compile under FreeBSD
	Submitted By: Timothy Redaelli - drittz
	I made some patches to make it compile under FreeBSD using
	gethostbyaddr_r when supported.

2007-04-28 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* [pupnp-devel] Type mixup on x86_64 causes UPNP_E_OUTOF_MEMORY
	Submitted By: Glen Masgai
	after an UpnpSendActionAsync() for example, i get UPNP_E_OUTOF_MEMORY
	in the callback using 1.4.4 on a x86_64 system. This happens in
	http_MakeMessage(), which in some cases get called with wrong types
	(int instead of size_t) in combination with format "b" and "Q".
	The attached patch should fix this.

*******************************************************************************
Version 1.4.4
*******************************************************************************

2007-04-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Tracker [ 1695399 ] Typo in util.h
	Submitted By: Luke Kim - nereusuj
	Unix sleep is in seconds but WIN32 Sleep is in milliseconds.

2007-04-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Tracker [ 1652827 ] UpnpRegisterRootDevice returned -104
	Submitted By: Michael Andersen - miwer
	
	Issue was found to be related to sizeof (size_t) != sizeof (int)
	on AMD64 systems. Emil Ljungdahl's AMD64 patch has been applied along
	with some other fixes. Original user report follows:

	When I run upnpd I get the above mentioned error (UPNP_E_OUTOF_MEMORY).
	I've tried with 1.4.1 and 1.4.2-RC3, it's the same. I don't understand why,
	because I have plenty of RAM, and I even tried closing some applications,
	but it didn't help.

	$ upnpd eth1 br0

	The following is logged in the /var/log/messages:
	Feb 6 01:33:47 server upnpd[6933]: Error registering the root device with
	descDocUrl: http://192.168.0.1:49152/gatedesc.xml
	Feb 6 01:33:47 server upnpd[6933]: UpnpRegisterRootDevice returned -104


	I tried enabling debugging and it looks like it cannot allocate memory
	through the membuffer_append function. It's wierd because it's only a few
	bytes.

	Please note, that I enabled some extra debugging lines that were commented,
	in order to get more information. See attached files.

*******************************************************************************
Version 1.4.3
*******************************************************************************

2007-03-13 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	* SF Tracker [ 1663004 ] Compile on Cygwin
	Submitted By: Jon Foster - jongfoster
	This patch gives basic support for building under Cygwin - it compiles,
	links, and a simple UPnP device application can initialise. I'm not sure
	if it actually works yet, but this is definitely a step in the right
	direction.
	
	Patch is against the 1.4.1 release. Changes are:
	
	* threadutil/inc/ithread.h: Fix the ithread mutex support to use
	documented, portable APIs (if present) rather than the Non-Portable (_NP)
	ones it uses now. This is required because Cygwin implements only the
	portable API.
	
	* threadutil/src/ThreadPool.c: Fake SetPolicyType() to do nothing on Cygwin
	because otherwise it fails. Should probably investigate why it fails and
	add a proper implementation later.
	
	* upnp/src/api/upnpapi.c: On Cygwin, zero out the GlobalHndMutex structure
	before initialising it. Without this, the initialisation fails. This
	appears to be a bug in Cygwin.
	
	* upnp/src/genlib/net/uri/uri.c: Use gethostbyname() on Cygwin.
	
2007-03-05 Oxy <oxygenic(at)users.sourceforge.net>
	* Code adapted and typedefs added to compile cleanly under Windows
	with Borland C++ Builder and MS Visual C++

2007-03-03 Marcelo Jimenez <mroberto(at)users.sourceforge.net>
	
	* Fixed nasty segmentation fault bug on membuffer.c.
	
*******************************************************************************
Version 1.4.2
*******************************************************************************

2007-02-09 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* 32/64 bits portability issues on *printf.
	Use %zd for size_t, and cast to (long long) for off_t.

2007-02-02 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* Bumped the program version to 1.4.2 in config.ac.

	* Now requires autoconf 2.60.

	* Fixed docdir use.

	* Does not install the documentation by default.

	* Use dist-bzip2 to create a .bz2 distribution file.

2007-01-23 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* SF Tracker [ 1634922 ] Support for large files (>= 2 GiB), part 2
	Submitted By: Jonathan Casiot - no_dice
	Summary: This patch hopefully fixes the remaining types and related
	code to enable files >= 2 GiB to be streamed. Jonathan claims to have
	tested this with a patched version of ushare-0.9.8 and a D-Link DSM-520.

2007-01-09 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* SF Tracker [ 1628629 ] Multicast interface patch
	Submitted By: Fredrik Svensson - svefredrik
	This patch fixes two problems:
	1) Specify the IP address for the interface when we do
	setsockopt IP_ADD_MEMBERSHIP. This makes it possible to run
	when no default router has been configured.
	2) Explicitly set the multicast interface through setsockopt
	IP_MULTICAST_IF. Avoids socket error -207 in some cases.
	
	* SF Tracker [ 1628590 ] XML parsing segfault patch
	Submitted By: Fredrik Svensson - svefredrik
	This patch fixes a segmentation fault problem that occurrs
	when parsing XML code than some routers produce.

2007-01-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* SF Tracker [ 1628552 ] XML white space patch
	Submitted By: Fredrik Svensson - svefredrik
	
	* SF Tracker [ 1628562 ] Maximum total jobs patch
	Submitted By: Fredrik Svensson - svefredrik
	Also, I incremented the libray versions and included some
	comments in the file configure.ac so that we do not bump
	the library version excessively, only the necessary numbers
	on the next release.
	
	* SF Tracker [ 1628575 ] Linksys WRT54G patch
	Submitted By: Fredrik Svensson - svefredrik
	
	* SF Tracker [ 1628636 ] SSDP packet copy patch
	Submitted By: Fredrik Svensson - svefredrik
	Changed NUM_COPY to 1 since, according to section 9.2 of the
	HTTPU/MU spec, we should never send more than one copy of a
	reply to an SSDP request. Ref. section 9.2 of
	http://www.upnp.org/download/draft-goland-http-udp-04.txt

2006-12-23 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* Thorough revision of every call of http_MakeMessage() due to a
	bug introduced in rev.79 "largefile patch added".
	http_MakeMessage() has a worst than brain damaged "printf" like
	interface. In rev.79, the "N" format parameter must be an off_t.
	Every call of this function with an "N" format parameter and an
	int passed on the stack would fail terribly.
	
	* SF Bug tracker [ 1590469 ]
	Typo in ixmlparser.c
	Submitted By: Erik Johansson - erijo
	
	* SF Bug Tracker [ 1590466 ] Invalid xml output
	Submitted By: Erik Johansson - erijo
	
	* SF Patch tracker [ 1581161 ] VStudio2005 patch
	Submitted By: David Maass - darkservant
	
	* SF Patch tracker [ 1587272 ] const-ified ixml
	Submitted By: Erik Johansson
	
	* Finished const-ifications as suggested by Erik Johansson in
	SF Patch tracker [ 1587272 ].

2006-07-05 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>
	* [bug-id] 1580440
	[submitted-by] Erik Johansson - erijo
	[patched-by] Erik Johansson - erijo
	The SOAP HTTP message that's generated on upnp errors
	is missing a \r\n\ between header and body.

2006-07-07 Oxy <virtual_worlds(at)gmx.de>

	* support for large files (>2 GBytes) added


*******************************************************************************
Version 1.4.1
*******************************************************************************

2006-07-07 Oxy <virtual_worlds(at)gmx.de>

	* full support for Windows added, static library and DLL are fully
	working, code compiles with Borland Builder C++ and MS Visual
	C/C++

2006-07-05 Nektarios K. Papadopoulos <npapadop(at)inaccessnetworks.com>

	* Include prebuilt documentation (html,pdf), dropping doc++ 
	dependancy.

2006-07-03 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* Patch for FreeBSD, thanks to Markus Strobl.

2006-06-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* Fix for missing "else" in httpreadwrite.c. Thanks to npapadop
	for the patch.

2006-06-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net>

	* Fix for va_list initialization in x86_64 architectures.

2006-06-08 Oxy <virtual_worlds(at)gmx.de>

	* Patch to fix memory leaks and reasons for crashes added (thanks
	to loigu)

*******************************************************************************
Version 1.4.0
*******************************************************************************

2006-05-26 Oxy <virtual_worlds(at)gmx.de>

	* defines in iasnprintf.h changed to work with GCC-version < 3

2006-05-22 Oxy <virtual_worlds(at)gmx.de>

	* BSD-patch added (not tested yet on an BSD system)

2006-05-19 Oxy <virtual_worlds(at)gmx.de>

	* Patch added for bug: ixml parser colapsed on empty args (arg="")

2006-05-18 Oxy <virtual_worlds(at)gmx.de>

	* DSM-320 patch added (fetched from project MediaTomb)
	
	* httpGet additons atch added, Added proxy support by introducing
	  UpnpOpenHttpGetProxy. UpnpOpenHttpGet now just calls
	  UpnpOpenHttpGetProxy with the proxy url set to NULL.
	  
	* Bugfix for typo ("\0" / "0") in ixmlparser.c
	
	* Bugfix for M-Search packet

*******************************************************************************
FORK FROM DEAD libupnp
*******************************************************************************

2006-04-29  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* THANKS: new file with list of contributors

	* upnp/src/gena/gena_device.c (respond_ok): add 'Content-Length: 0'
	  in subscription response. Patch by Chaos (Bug # 1455367).

2006-04-08  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/doc/UPnP_Programming_Guide.pdf: replace this document with 
	  the one in libupnp-doc-1.2.1 because current CVS version 
	  was corrupted.

2006-04-06

	* changes applied to several files to work under Sparc Solaris, temporarily
	  requiring a define SPARC_SOLARIS

2006-04-03  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/Makefile.am: install upnp samples in $(docdir)/examples

2006-03-28  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* configure.ac: add --with-docdir option to choose where documentation
	  is installed (or -without-docdir to not install the documentation)

2006-03-27  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* ixml/test: add simple test suite for xml parser

2006-03-26  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* ixml/src/ixmlparser.c (Parser_processCDSect): fix bug which prevents
	  CDATA sections which contain a 0 (zero) to be parsed (instead the
	  parsing of the whole document is aborted). Patch by Arno Willig 
	  (Patch # 1432124).

	* configure.ac, upnp/Makefile.am: add "--disable-samples" configure
	  option, and move samples compilation from check_PROGRAMS to
	  noinst_PROGRAMS

2006-03-25  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/genlib/miniserver/miniserver.c (get_miniserver_sockets): 
	  fix bug if new socket created has fd 0 (can only occur when stdin
	  has been closed). Patch by Oskar Liljeblad 2004-07-02 :
	  http://sourceforge.net/mailarchive/message.php?msg_id=8870528
	
2006-03-21  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/test/test_init.c: add some version checks and exit if failure

2006-03-05  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* libupnp version 1.3.1

	* upnp/inc/upnpconfig.h.in: add new define UPNP_VERSION_PATCH

	* upnp/test/test_init.c: add simple test to run during checks

	* upnp/inc/upnp.h: include "upnpdebug.h" only if debug enabled
	  in the library (else header file is not installed)

	* upnp/Makefile.am (libupnp_la_LDFLAGS): add inter-library libtool
	  dependencies between upnp and ixml / threadutil, so that programs 
	  linking against upnp only still work.

2006-03-04  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* libupnp version 1.3.0

2006-03-03  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/genlib/net/http/httpreadwrite.c (get_sdk_info): use
	  package version string from configure to set sdk info

	* upnp/Makefile.am: add sample/tvdevice/web/ files in EXTRA_DIST
	  + do not distribute generated upnpconfig.h file.

2006-02-28  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/inc/config.h, configure.ac: use only new defines
	  UPNP_HAVE_xx instead of INCLUDE_yyy_APIS and INTERNAL_WEB_SERVER

	* upnp/Makefile.am, ixml/Makefile.am: add -export-symbols-regex to
	  the librarie LDFLAGS in order to export only the symbols defined 
	  in the API

2006-02-27  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* configure.ac: add libtool versions for the 3 libraries

	* ixml/src/ixml.c (copy_with_escape): add missing 'static' to function

	* threadutil/src/ThreadPool.c (SetSeed): add missing 'static' 

2006-02-26  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* threadutil/inc/iasnprintf.h: add gcc __printf__ format attribute
	  to "iasnprintf"

	* upnp/src/api/upnpapi.c: fix invalid UpnpPrintf formats

	* upnp/src/gena/gena_device.c: fix invalid UpnpPrintf formats

	* upnp/src/inc/config.h: move upnp/inc/config.h to internal
	  sources (this file is no longer installed with the libraries)

	* upnp/inc/upnpdebug.h: new file created from debug definitions
	  previously in upnp/inc/config.h

	* upnp/src/api/config.c: rename to upnp/src/api/upnpdebug.c

	* upnp/inc/upnpconfig.h.in: new file to contain information on    
	  the configuration of the installed libraries (generates installed
	  file <upnp/upnpconfig.h>)

2006-02-22  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/ : add missing include of config.h in some .c files

2006-02-21  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/inc/upnp.h: move some definitions which should not be
	  exported into "upnp/src/inc/util.h"

	* import all modifications below from libupnp in djmount 0.51
	  into official libupnp
	
2006-01-17  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* threadutil/Makefile.am (libthreadutil_la_SOURCES): remove extraneous
	  file

2006-01-15  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* configure.ac: add checks for large-file support

	* upnp/inc/config.h: rename to "upnpconfig.h". The new "config.h" file
	  is the one generated by autoconf.

	* m4/type_socklen_t.m4: added new check for socklen_t (fallback to
	  int if not defined)

	* upnp/src/genlib/miniserver/miniserver.c, 
	  upnp/src/ssdp/ssdp_server.c: use socklen_t where appropriate 
	  (instead of int)

	* upnp/src/genlib/net/http/httpreadwrite.c (get_sdk_info): remove
	  XINLINE declaration (unused and too late)

	* ixml/src/node.c (ixmlNode_getNodeType): fix compilation warning
	  on const return type

2006-01-12  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/inc/readwrite.h : suppress unused C++ header file

2006-01-11  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/inc/config.h, upnp/src/inc/upnpapi.h, 
	  upnp/src/inc/httpreadwrite.h: remove internal configuration variable 
	  MINIMUM_DELAY (no clear purpose)

2005-12-05  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/inc/upnp.h: re-declare obsolete method UpnpSetContentLength,
	  for binary compatibility with previous libupnp version.

	* upnp/src/api/upnpapi.c: correct type of g_maxContentLength to size_t

2005-11-01  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* autoconfiscate library : replace all makefiles by Makefile.am
	  for automake support, + preliminary autoconf support
	  (generated config.h not yet used in source files)

2005-10-18  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/makefile: fix location of DEBUG STATIC libupnp library
	
	* upnp/sample/tvctrlpt/linux/Makefile, 
	  upnp/sample/tvdevice/linux/Makefile: fix STATIC library support

2005-10-16  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* threadutil/src/Makefile (clean): remove built library

2005-08-28  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* ixml/src/ixml.h, ixml/src/ixml.c (ixmlRelaxParser) : new function

	* ixml/src/ixmlparser.h, ixml/src/ixmlparser.c (Parser_setErrorChar) :
	  new function

2005-08-02  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* ixml/src/Makefile: correct bug for static library being incorrectly 
	  stripped when building non-debug

2005-06-09  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* ixml/src/element.c (ixmlElement_removeAttributeNode): 
	  remove some compilation warning

	* ixml/inc/ixml.h, ixml/src/document.c : 
	  add some missing const's in public API 

	* upnp/inc/upnptools.h, upnp/src/api/upnptools.c : 
	  add missing const's in public API

2005-05-28  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/inc/config.h: suppress HTTP_READ_BYTES (unused)
	  and replace by DEFAULT_SOAP_CONTENT_LENGTH (previously in upnpapi.h)
	
	* upnp/inc/upnp.h, upnp/src/api/upnpapi.c : replace 
	  UpnpSetContentLength (which was not using its Handle argument) 
	  by global function UpnpSetMaxContentLength. 
	  Remove "hard" limitation to 32K (not suitable for using in UPnP AV).
	
	* upnp/src/inc/upnpapi.h : removed DEFAULT_SOAP_CONTENT_LENGTH
	  (moved to config.h) and MAX_SOAP_CONTENT_LENGTH (now unused)

	* upnp/src/api/upnptools.c : add more error message strings

	* upnp/src/genlib/net/http/httpreadwrite.c : return OUTOF_BOUNDS
	  instead of BAD_HTTPMSG when allowed Content Length is exceeded.

	* upnp/src/genlib/net/http/httpreadwrite.c : corrected an incorrect
	  sprintf format
	
2005-05-27  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/makefile, upnp/src/makefile, 
	  ixml/Makefile, ixml/src/Makefile, 
	  threadutil/Makefile, threadutil/src/Makefile : 
	  implement STATIC library support (from patch at 
	  http://sourceforge.net/tracker/?group_id=7189&atid=307189 )

2005-05-26  Rémi Turboult  <r3mi(at)users.sourceforge.net>

	* upnp/src/api/upnpapi.c, upnp/src/soap/soap_device.c,
	  upnp/src/soap/makefile : 
	  corrections for compilation with CLIENT=1 only
	
	* importing "libupnp-1.2.1a" as baseline
	
