# This project generates a backwards spike, away from the trace, that
# mustn't cut any other traces!

metric=1
metricoutput=1

back=project-controller-B_Cu.gbr 
outline=project-controller-Edge_Cuts.gbr
drill=project-controller.drl

nog81=true

zsafe=1
spinup-time=3
spindown-time=5
zchange=10

zdrill=-2
zmilldrill=-2
drill-feed=30
drill-speed=1000
#drills-available=0.5,0.8,0.9,1.0
milldrill-diameter=0.6
min-milldrill-hole-diameter=0

zwork=-0.3 
mill-feed=30
mill-speed=1000
mill-diameters=1,0.6
mill-vertfeed=20
mill-infeed=0.5
milling-overlap=50%
isolation-width=10

cutter-diameter=1
zcut=-2
cut-feed=50
cut-vertfeed=20
cut-speed=1000
cut-infeed=0.5

#backtrack=0
#path-finding-limit=0
#optimise=0
#tsp-2opt=0
