# Writing python scripts to change fonts in FontForge

I assume you have a working knowledge of Python. FontForge implements two Python modules -- one great huge one called `fontforge` which provides access to as much of FontForge's functionality as I've had time to write, and one tiny one called `psMat` which provides quick access to some useful transformations expressed as PostScript matrices.

In python terms fontforge embeds python. It is possible to build fontforge so that it is also a python extension (`configure --enable-pyextension`)

The fontforge module also defines several types

- point
- contour
- layer
- glyphPen
- glyph
- selection
- private
- math
- font

## Command line convenience

For convenience, Python commands given as a `-c` argument on the command line have the following code prepended:

>     from sys import argv; from fontforge import *

Hence, the trivial script to convert a font can be written:

>     fontforge -c 'open(argv[1]).generate(argv[2])'

psMat
Methods
method | args | comments
--- | --- | ---
`identity` | `()` | returns an identity matrix as a 6 element tuple
`compose` | `(mat1,mat2)` | returns a matrix which is the composition of the two input transformations
`inverse` | `(mat)` | returns a matrix which is the inverse of the input transformation. (Note: There will not always be an inverse)
`rotate` | `(theta)` | returns a matrix which will rotate by `theta`. `Theta` is expressed in radians
`scale` | `(x[,y])` | returns a matrix which will scale by `x` in the horizontal direction and `y` in the vertical. If `y` is omitted, it will scale by the same amount (`x`) in both directions
`skew` | `(theta)` | returns a matrix which will skew by `theta` (to produce a oblique font). `Theta` is expressed in radians
`translate` | `(x,y)` | returns a matrix which will translate by `x` in the horizontal direction and `y` in the vertical
Types
None

fontforge
Global Variables
variable | comments
--- | ---
`hooks` | A dictionary which the user may fill to associate certain fontforge events with a python function to be run when those events happen. The function will be passed the font (or possibly glyph) for which the relevant event occurred.
Hook names
newFontHook | This function will be called when a new font has been created.
loadFontHook | This function will be called when a font is loaded from disk. (if a font has an "initScriptString" entry in its persistent dictionary, that script will be invoked before this function).
Other hooks are defined in a font's own temporary and persistent dictionaries.
Methods
method | args | comments
`getPrefs` | `(pref-name)` | returns the value of the named preference item
`setPrefs` | `(pref-name,value)` | sets the value of the named preference item
`hasSpiro` | `()` | Returns a boolean, `True` if Raph Levien's spiro package is available for use in FontForge.
`savePrefs` | `()` | Saves the current preference settings
`loadPrefs` | `()` | Loads the user's default preference settings. Not done automatically in a script.
`defaultOtherSubrs` | `()` | Sets the type1 PostScript OtherSubrs to the default value
`readOtherSubrsFile` | `(filename)` | Sets the type1 PostScript OtherSubrs to the stuff found in the file.
`loadEncodingFile` | `(filename[,encname])` | Loads an encoding file, returns the name of the encoding or None. When loading encodings in Unicode consortium format, an encname has to be specefied or the encoding will be ignored and None will be reterned.
`loadNamelist` | `(filename)` | Loads a namelist
`loadNamelistDir` | `(dirname)` | Loads all namelist files in the directory
`loadPlugin` | `(filename)` | Loads a fontforge plugin
`loadPluginDir` | `(dirname)` | Loads all fontforge plugins in the directory
`preloadCidmap` | `(filename,registry,order,supplement)` | Loads a fontforge cidmap file (first three args are strings, last is an integer)
`printSetup` | `(type[,printer|cmd|file, width,height])` | Prepare to print a font sample. The first argument may be one of: lp Queues postscript output to the printer using `lp`. You may use the optional second argument to specify the printer name. lpr Queues postscript output to the printer using `lpr`. You may use the optional second argument to specify the printer name. ghostview Displays the output using ghostview (or gv). The second argument is ignored. command Use a custom shell command to print the output. The second argument should contain the command and its arguments. ps-file Dump the postscript output to a file. The second argument specifies the filename. pdf-file Dump the output as pdf to a file. The second argument specifies the filename. The third and fourth arguments are optional and specify the page size (in points) for the output. The third argument is the page width and the fourth is the height. These setting remain until changed
`nameFromUnicode` | `(uni[,namelist])` | Finds the glyph name associated with a given unicode codepoint. If a namelist is specified the name will be taken from that.
`UnicodeAnnotationFromLib` | `(n)` | Returns the Unicode Annotations for this value as described by www.unicode.org. If there is no unicode annotation for this value, or no library available, then return empty string "". It can execute with no current font.
`UnicodeBlockCountFromLib` | `(n)` | Return the number of Unicode Blocks as described by www.unicode.org. Currently, the blocks are {0..233}, spanning unicode values {uni0..uni10FFFF}. If there is no value, or no library available, then return -1. This can execute with no current font.
`UnicodeBlockEndFromLib` | `(n)` | Returns the Unicode Block end value as described by www.unicode.org. Currently, the blocks are {0..233}, spanning unicode values {uni0..uni10FFFF}. If there is no value, or no library available, then return -1. This can execute with no current font.
`UnicodeBlockNameFromLib` | `(n)` | Returns the Unicode Block Name as described by www.unicode.org. Currently, the blocks are {0..233}, spanning unicode values {uni0..uni10FFFF}. If there is no value, or no library available, then return empty string "". This can execute with no current font.
`UnicodeBlockStartFromLib` | `(n)` | Returns the Unicode Block start value as described by www.unicode.org. Currently, the blocks are {0..233}, spanning unicode values {uni0..uni10FFFF}. If there is no value, or no library available, then return -1. This can execute with no current font.
`unicodeFromName` | `(glyphname)` | Looks up glyph name in its dictionary and if it is associated with a unicode code point returns that number. Otherwise it returns -1
`UnicodeNameFromLib` | `(n)` | Returns the Unicode Name for this value as described by www.unicode.org. If there is no unicode name for this value, or no library available, then return empty string "". It can execute with no current font.
`UnicodeNamesListVersion` | `()` | Return the Unicode Nameslist Version (as described by www.unicode.org). libuninameslist is released on a schedule that depends on when www.unicode.org releases new information. These dates do not match FontForge release dates, therefore users might not keep this optional library upto current updates. This instruction can be used to test if the Nameslist library is recent for your script. This function currently works only for libuninameslist ver_0.3.20130501 or later, else it returns empty string "". This can execute with no current font.
`version` | `()` | Returns fontforge's version number. This will be a large number like 20070406.
`runInitScripts` | `()` | Runs the system or user initialization scripts, if not already run. This is primarily intended when importing FontForge into a python process.
`scriptPath` | `()` | Returns a tuple listing the directory paths which are searched for python scripts during FontForge initialization.
`fonts` | `()` | Returns a tuple of all fonts currently loaded into fontforge for editing
`activeFont` | `()` | If the script were invoked from the File->Execute Script... dialog, or invoked by a menu item in the font view, this returns the font that was active at the time. Otherwise it returns None.
`activeGlyph` | `()` | If the script were invoked from the File->Execute Script... dialog or a menu item from an outline glyph window or a glyph import/export command this returns the glyph that was active at the time. Otherwise it returns None.
`activeLayer` | `()` | This returns the currently active layer as an integer between 0 (inclusive) and the font/glyph's layer count (exclusive). It may also be set to -1 if the current glyph window is displaying the font's guidline layer.
`fontsInFile` | `(filename)` | Returns a tuple of all fontnames found in the specified file. The tuple may be empty if fontforge couldn't find any.
`open` | `(filename[,flags])` | Opens a filename and returns the font it contains. If it does. If the flags argument is 4, then ff will load all glyphs in the 'glyf' table of a ttc file (rather than just the glyphs used in the font picked). This will not load all 'glyf' tables though.
`parseTTInstrs` | `(string)` | Returns a binary string each byte of which corresponds to a truetype instruction. The input string should contain a set of instruction names as "SRP0\nMIRP[min,rnd,black]"
`unParseTTInstrs` | `(sequence)` | Reverse of the above. Converts a binary string into a human (sort of) readable string
`unitShape` | `(n)` | Returns a closed contour which is a regular n-gon. The contour will be inscribed in the unit circle. If n is negative, then the contour will be circumscribed around the unit circle. A value of 0 will produce a unit circle. If n==1 it is treated as if n were -4 -- a circumscribed square where each side is 2 units long (this is for historical reasons). Behavior is undefined for n=2,-1,-2.
`registerGlyphSeparationHook` | `(hook)` | The GlpyphSeparationHook is a python routine which FontForge will call when it wants to figure out the optical separation between two glyphs. If you neve call this, or if you call it with a value of `None` FontForge will use a built-in default. This routine gets called during AutoWidth, AutoKern, and computing the optical left and right side bearings (for 'lfbd' and 'rtbd' features). For more infomation see its own section.
User Interface Methods
> Users may define scripts to be run when menu items are invoked. Some of these scripts will want to ask users questions, so this section provides routines to determine if fontforge has a user interface, a command to add menu items, and various small standard dialogs to interact with the user. I do not currently provide a mechanism for allowing people to define special purpose dialogs (for example they might want to ask more than one question in a dialog, and I don't support that). When FontForge starts (if it's a fontforge with python) it will look at the directories `$(PREFIX)/share/fontforge/python` and `~/.FontForge/python` and attempt to run all files in those directories which end in ".py". Presumably these files will allow people to customize the user interface to suit their needs. Currently it reads the files in directory order (which is generally somewhere between creation order and totally random). It will read the system directory before the user directory. ### Example
>     import fontforge

>     def nameGlyph(junk,glyph):
>       print glyph.glyphname

>     fontforge.registerMenuItem(nameGlyph,None,None,"Glyph",None,"Print Glyph Name")

>     def neverEnableMe(junk,glyph):
>       return False

>     fontforge.registerMenuItem(nameGlyph,neverEnableMe,None,"Glyph",None,"SubMenu","Print Glyph Name")

>     def importGlyph(junk,glyph,filename,toback):
>       print "Import"
>       print glyph.glyphname
>       print filename
>     def exportGlyph(junk,glyph,filename):
>       print "Import"
>       print glyph.glyphname
>       print filename

>     fontforge.registerImportExport(importGlyph,exportGlyph,None,"foosball","foo","foo,foobar")
The first call will define a menu item in the Tools menu of the Glyph window. The menu will be called "Print Glyph Name". It has no shortcut to invoke it. It needs no external data. It is always enabled. And when activated it will invoke the function "nameGlyph" whch prints the name of the glyph in the window from which the command is invoked. The second call defines a menu item in a submenu of the Tools menu. This submenu is called "SubMenu". This item will never be enabled -- but if it were enabled it would again call "nameGlyph" to print the name of the current glyph. The last provides a way to import and export files of type "foosball" (or it would if the routines did anything). Not a very useful example
`hasUserInterface` | `()` | Returns True if this session of FontForge has a user interface
`registerMenuItem` | `(menu-function, enable_function, data, which_window, shortcut_string, {submenu-names,} menu-name-string)` | If fontforge has a user interface this will add this menu item to FontForge's Tool menu, either in the font or the outline glyph view (or both). menu-function This is the function that will be called when the menu item is activated. It will be passed two arguments, the first is the data value specified here (which may be None, indeed will probably usually be None), and the second is the glyph or font (depending on the window type) from which the menu item was activated. Its return value is ignored. enable_function This may be None -- in which case the menu item will always be enabled. Otherwise it will be called before the menu pops up on the screen to determine whether this item should be enabled. It will be passed the same arguments as above. It should return True if the item should be enabled and False otherwise. data This can be whatever you want (including None). FontForge keeps track of it and passes it to both of the above functions. Use it if you need to provide some context for the menu item. which_window May be either of the strings "Font" or "Glyph (or the tuple `("Font","Glyph")`) and it determines which type of window will have this menu item in its "Tools" menu. shortcut-string May be None if you do not wish to supply a shortcut. Otherwise should be a string like "Menu Name|Cntl-H" (the syntax is defined in the translation section). submenu-names You may specify as many of these as you wish (including leaving them out altogether), this allows you to organize the Tools menu into submenus. (If a submenu of this name does not currently exist, fontforge will create it). menu-name The name that will appear in the menu for this item. This will only affect windows created after this command is executed. Normally the command will be executed at startup and so it will affect all windows.
`registerImportExport` | `(import-function, export_function, data, name, extension, [extension-list])` | This will add the capability to import or export files of a given type, presumably a way of specifying the splines in a given glyph. import-function The function to call to import a file into a glyph. It will be called with: The data argument (specified below), A pointer to the glyph into which the import is to happen, A filename, A flag indicating whether the import should go to the background layer or foreground. This function may be None. In which case there is no import method for this file type. export-function The function to call to export a glyph into a file. It will be called with: The data argument (see below), a pointer to the glyph, and a filename. This function may be None, in which case there is no export method for this file type. data Anything you like (including None). It will be passed to the import/export routines and can provide them with context if they need that. name The name to be displayed in the user interface for this file type. This may just be the extension, or it might be something more informative. extension This is the default extension for this file type. It is used by the export dialog to pick an extension for the generated filename. extension-list Some file types have more than one common extension (eps files are usually named "eps", but I have also seen "ps" and "art" used). The import dialog needs to filter all possible filenames of this file type. This argument should be a comma separated list of extensions. It may be omitted, in which case it defaults to being the same as the "extension" argument above.
`logWarning` | `(msg)` | Adds the message (a string) to FontForge's Warnings window. (if you wish to display a % character you must represent it as two percents). If there is no user interface the output will go to stderr.
`postError` | `(win-title,msg)` | Creates a popup dialog to display the message (a string) in that dlg. (if you wish to display a % character you must represent it as two percents). If there is no user interface the output will go to stderr.
`postNotice` | `(win-title,msg)` | Creates a little window which will silently vanish after a minute or two and displays the message (a string) in that window. (if you wish to display a % character you must represent it as two percents). If there is no user interface the output will go to stderr.
`openFilename` | `(question,[def-name,[filter]])` | All arguments are strings. The first is a question asked to the user (for which a filename to open is presumed to be the answer). The second is optional and provides a default filename. The third is optional and provides a filter (like "*.sfd") The result is either a filename or None if the user canceled the dialog. Throws an exception if there is no user interface.
`saveFilename` | `(question,[def-name,[filter]])` | All arguments are strings. The first is a question asked to the user (for which a filename to save something to is presumed to be the answer). The second is optional and provides a default filename. The third is optional and provides a filter (like "*.sfd") The result is either a filename or None if the user canceled the dialog. Throws an exception if there is no user interface.
`ask` | `(title,question,answers, [def,cancel])` | Allows you to ask the user a multiple choice question. It popups up a dialog posing the question with a list of buttons ranged underneath it -- one for each answer. The first argument is the dialog's title, the second is the question to be asked, the third is a tuple of strings -- each string will become a button, the fourth and fifth arguments are option, the fourth is the index in the answer array that will be the default answer (the one invoked if the user presses the [Return] key), and the fifth is the answer invoked if the user presses the [Escape] key. If omitted the default answer will be the first, and the cancel answer will be the last. The function returns the index in the answer array of the answer choosen by the user. Throws an exception if there is no user interface.
`askChoice`s | `(title,question,answers, [def])` | Similar to the above allows you to ask the user a multiple choice question. It popups up a dialog posing the question with a scrollable list of choices -- one for each answer. The first argument is the dialog's title, the second is the question to be asked, the third is a tuple of strings -- each string will become a button, the fourth and fifth arguments are option, the fourth is the index in the answer array that will be the default answer (the one invoked if the user presses the [Return] key). If omitted the default answer will be the first. The function returns the index in the answer array of the answer choosen by the user. If the user cancels the dialog, a -1 is returned. Throws an exception if there is no user interface.
`askString` | `(title,question,[def-string])` | Allows you to as the user a question for which a string is the answer. The first argument is the dialog's title, the second is the question to be asked, the third is optional and specified a default answer. The function returns the string the user typed or None if they cancelled the dialog. Throws an exception if there is no user interface.
Types
point
contour
layer
glyphPen
glyph
selection
font

point
Creation
`fontforge.point` | `([x,y,on-curve])` | Creates a new point. Optionally specifying its location
Members
member | comments
--- | ---
`x` | The x location of the point
`y` | The y location of the point
`on_curve` | Whether this is an on curve point or an off curve point (a control point)
`selected` | Whether this point is selected in the UI. If an off-curve point is selected in means the preceding (interpolated) on-curve point is selected.
`name` | The point name (generally there is no name)
Methods
method | args | comments
`dup` | `()` | Returns a copy of the current point.
`transform` | `(tuple)` | Transforms the point by the transformation matrix
Pickling Methods
`__reduce__` | `()` | This function allows the pickler to work on this type. I don't think it is useful for anything else.

contour
Description
A contour is a collection of points. A contour may be either based on cubic or quadratic splines. If based on cubic splines there should be either 0 or 2 off-curve points between every two on-curve points. If there are no off-curve points then we have a line between those two points. If there are 2 off-curve points we have a cubic bezier curve between the two end points. If based on quadratic splines things are more complex. Again, two adjacent on-curve points yield a line between those points. Two on-curve points with an off-curve point between them yields a quadratic bezier curve. However if there are two adjacent off-curve points then an on-curve point will be interpolated between them. (This should be familiar to anyone who has read the truetype 'glyf' table docs). For examples of what these splines can look like see the section on bezier curves. A contour may be open in which case it is just a long wiggly line, or closed when it is more like a circle with an inside and an outside. Unless you are making stroked fonts all your contours should eventually be closed. Contours may also be expressed in terms of Raph Levien's spiro points. This is an alternate representation for the contour, and is not always available (Only if `fontforge.hasSpiro()` is`True`. If available the spiro member will return a tuple of spiro control points, while assigning to this member will change the shape of the contour to match the new spiros. Two contours may be compared to see if they describe similar paths.
Creation
`fontforge.contour` | `()` | Creates a new contour
Members
member | comments
--- | ---
`is_quadratic` | Whether the contour should be interpretted as a set of quadratic or cubic splines. Setting this value has the side effect of converting the point list to the appropriate format
`closed` | Whether the contour is open or closed
`name` | The contour name (generally there is no name)
`spiros` | This is an alternate representation of a curve. This member is only available if fontforge.hasSpiro() is True. Returns a tuple of spiro control points. Each of these is itself a tuple of four elements, an x,y location, a type field, and a set of flags. The type field takes on values (which are predefined constants in the fontforge module):
fontforge.spiroG4 | 1 | A Spiro G4 curve point
fontforge.spiroG2 | 2 | A Spiro G2 curve point
fontforge.spiroCorner | 3 | A Spiro corner point
fontforge.spiroLeft | 4 | A Spiro left "tangent" point
fontforge.spiroRight | 5 | A Spiro right "tangent" point
fontforge.spiroOpen | 6 | This may only be used on the first point in a spiro tuple. It indicates that the tuple describes an open contour.
For more information on what these point types mean see Raph Levien's work. The flags argument is treated as a bitmap of which currently on one bit (0x1) is defined. This indicates that this point is selected in the UI. When you assign a tuple of spiro control points to this member, the point list for the Bezier interpretation of the contour will change. And when you change the Bezier interpretation the set of spiro points will change.
Sequence Protocol
`len(c)` | The number of points in the contour
`c[i]` | The ith point on the contour. You may assign to this
`c[i:j]` | The contour containing points between i and j. You may assign to this
`c + d` | A contour concatenating c and d. D may be either another contour or a point.
`c += d` | Appends d to c. D may be either another contour or a point.
`p in c` | Returns whether the point p is in the contour c. p may be either a point or a tuple of two numbers
Does not support the repeat concept
Iterator Protocol
`__iter__` | `()` | Returns an iterator for the contour which will return the points in order.
Methods
method | args | comments
`dup` | `()` | Returns a deep copy of the contour. That is, it copies the points that make up the contour.
`isEmpty` | `()` | Returns whether the contour is empty (contains no points)
| Contour construction
`moveTo` | `(x,y)` | Adds an initial, on-curve point at (x,y) to the contour
`lineTo` | `(x,y[,pos])` | Adds an line to the contour. If the optional third argument is give, the line will be added after the pos'th point, otherwise it will be at the end of the contour.
`cubicTo` | `((cp1x,cp1y)(cp2x,cp2y)(x,y)[,pos])` | Adds a cubic curve to the contour. If the optional third argument is give, the line will be added after the pos'th point, otherwise it will be at the end of the contour.
`quadraticTo` | `((cpx,cpy)(x,y)[,pos])` | Adds a quadratic curve to the contour. If the optional third argument is give, the line will be added after the pos'th point, otherwise it will be at the end of the contour.
`insertPoint` | `(point[,pos])` | Adds point to the contour. If the optional third argument is give, the line will be added after the pos'th point, otherwise it will be at the end of the contour. The point may be either a point or a tuple with three members (x,y,on_curve)
`makeFirst` | `(pos)` | Rotate the point list so that the pos'th point becomes the first point
`isClockwise` | `()` | Returns whether the contour is drawn in a clockwise direction. A return value of -1 indicates that no consistant direction could be found (the contour self-intersects).
`reverseDirection` | `()` | Reverse the order in which the contour is drawn (turns a clockwise contour into a counter-clockwise one). See also layer.correctDirection.
`similar` | `(other-contour[,error])` | Checks whether this contour is similar to the other one where error is the maximum distance (in em-units) allowed for the two contours to diverge. This is like the comparison operator, but that doesn't allow you to specify an error bound.
`xBoundsAtY` | `(ybottom[,ytop])` | Finds the minimum and maximum x positions attained by the contour when y is between ybottom and ytop (if ytop is not specified it is assumed the same as ybottom). If the contour does not have any y values in the specified range then ff will return None.
`yBoundsAtX` | `(xleft[,xright])` | Finds the minimum and maximum y positions attained by the contour when x is between xleft and xright (if xright is not specified it is assumed the same as xleft). If the contour does not have any x values in the specified range then ff will return None.
| Contour manipulation
`addExtrema` | `([flags,emsize])` | Extrema should be marked by on-curve points. If a curve lacks a point at an extrema this command will add one. Flags may be one of the following strings all Add all missing extrema only_good Only add extrema on longer splines (with respect to the em-size) only_good_rm As above but also merge away on-curve points which are very close to, but not on, an added extremum
`cluster` | `([within,max])` | Moves clustered coordinates to a standard central value. See Also round
`merge` | `(pos)` | Removes the on-curve point a the given position and rearranges the other points to make the curve as similar to the original as possible. (pos may also be a tuple of positions, all of which will be removed) See Also simplify
`round` | `([factor])` | Rounds the x and y coordinates. If factor is specified then new-coord = round(factor*old-coord)/factor. See Also cluster
`selfIntersects` | `()` | Returns whether this contour intersects itself.
`simplify` | `([error-bound,flags,tan_bounds, linefixup,linelenmax])` | Tries to remove excess points on the contour if doing so will not perturb the curve by more than `error-bound`. Flags is a tuple of the following strings ignoreslopes Allow slopes to change ignoreextrema Allow removal of extrema smoothcurves Allow curve smoothing choosehv Snap to horizontal or vertical forcelines flatten bumps on lines nearlyhvlines Make nearly horizontal/vertical lines be so mergelines Merge adjacent lines into one setstarttoextremum Rotate the point list so that the start point is on an extremum removesingletonpoints If the contour contains just one point then remove it See Also merge
`transform` | `(matrix)` | Transforms the contour by the matrix
| random stuff about contours
`boundingBox` | `()` | Returns a tuple representing a rectangle (xmin,ymin, xmax,ymax) into which the contour fits. It is not guaranteed to be the smallest such rectangle, but it will often be.
`getSplineAfterPoint` | `(pos)` | Returns a tuple of two four-element tuples. These tuples are x and y splines for the curve after the specified point.
`draw` | `(pen)` | Draw the contour to the pen argument.
Pickling Methods
`__reduce__` | `()` | This function allows the pickler to work on this type. I don't think it is useful for anything else.

layer
Description
A layer is a collection of contours. All the contours must be the same order (all quadratic or all cubic). Currently layers do not contain references. Layers may be compared to see if their contours are similar.
Creation
`fontforge.layer` | `()` | Creates a new layer
Members
member | comments
--- | ---
`is_quadratic` | Whether the contours should be interpretted as a set of quadratic or cubic splines. Setting this value has the side effect of converting the contour list to the appropriate format
Sequence Protocol
`len(c)` | The number of contours in the layer
`c[i]` | The ith contour on the layer. You may assign to this
`c + d` | A layer concatenating c and d. D may be either another layer or a contour.
`c += d` | Appends d to c. D may be either another layer or a contour.
Does not support the repeat, slice and contains concepts
Iterator Protocol
`__iter__` | `()` | Returns an iterator for the layer which will return the contours in order.
Methods
method | args | comments
`dup` | `()` | Returns a deep copy of the layer. That is, it will copy all the contours and all the points as well as copying the layer object itself.
`isEmpty` | `()` | Returns whether the layer is empty (contains no contour)
`addExtrema` | `([flags,emsize])` | Extrema should be marked by on-curve points. If a curve lacks a point at an extrema this command will add one. Flags may be one of the following strings all Add all missing extrema only_good Only add extrema on longer splines (with respect to the em-size) only_good_rm As above but also merge away on-curve points which are very close to, but not on, an added extremum
`cluster` | `([within,max])` | Moves clustered coordinates to a standard central value. See also round.
`correctDirection` | `()` | Orients all contours so that external ones are clockwise and internal counter-clockwise. See also contour.isClockwise.
`export` | `(filename)` | Exports the current layer (in outline format) to a file. The type of file is determined by the extension.
`exclude` | `(excluded-layer)` | Removes the excluded area from the current contours. See also removeOverlap and intersect.
`intersect` | `()` | Leaves only areas in the intersection of contours. See also removeOverlap and exclude.
`removeOverlap` | `()` | Removes overlapping areas. See also intersect and exclude.
`interpolateNewLayer` | `(other-layer,amount)` | Creates (and returns) a new layer which contains splines interpolated from the current layer and the first argument. If amount is 0 the result will look like the current layer, if 1 then like the first argument.
`round` | `([factor])` | Rounds the x and y coordinates. If factor is specified then new-coord = round(factor*old-coord)/factor. See also cluster.
`selfIntersects` | `()` | Returns whether any of the contours on this layer intersects any other contour (including itself).
`similar` | `(other-layer[,error])` | Checks whether this layer is similar to the other one where error is the maximum distance (in em-units) allowed for any two corresponding contours in the layers to diverge. This is like the comparison operator, but that doesn't allow you to specify an error bound.
`simplify` | `([error-bound,flags,tan_bounds, linefixup,linelenmax])` | Tries to remove excess points on the layer if doing so will not perturb the curve by more than `error-bound`. Flags is a tuple of the following strings ignoreslopes Allow slopes to change ignoreextrema Allow removal of extrema smoothcurves Allow curve smoothing choosehv Snap to horizontal or vertical forcelines flatten bumps on lines nearlyhvlines Make nearly horizontal/vertical lines be so mergelines Merge adjacent lines into one setstarttoextremum Rotate the point list so that the start point is on an extremum removesingletonpoints If the contour contains just one point then remove it
`stemControl` | `(stem_width_scale, [hscale, stem_height_scale, vscale, xheight])` | Allows you to scale counters and stems independently of each other. `Stem_width_scale` specifies by how much the widths of stems should be scaled (this should be a number around 1). If omitted `hscale` defaults to 1, otherwise it will indicate the horizontal scaling factor for the glyph as a whole. If omitted `stem_height_scale` defaults to `stem_width_scale`, otherwise it specifies the scaling for stem heights. If omitted `vscale` defaults to `hscale`, otherwise it specifies the vertical scale factor for the glyph as a whole. `Xheight` is optional, if specified it will fix the points at that height so that they will be at the same level across glyphs.
`stroke` | `("circular",width[,linecap,linejoin,flags]) ("eliptical",width,minor-width,angle [,linecap,linejoin,flags]) ("caligraphic",width,height,angle[,flags]) ("polygon",contour[,flags])` | Strokes the current line using one of the indicated pens. Line cap may be one of butt round square line join may be miter round bevel flags is a tuple containing some of the following strings removeinternal removeexternal cleanup If a polygonal pen is specified the contour must be a closed, convex polygon (no curved edges) with fewer than 100 vertices.
`transform` | `(matrix)` | Transforms the layer by the matrix
`nltransform` | `(xexpr,yexpr)` | xexpr and yexpr are strings specifying non-linear transformations that will be applied to all points in the layer (with xexpr being applied to x values, and yexpr to y values, of course). The syntax for the expressions is explained in the non-linear transform dialog.
`boundingBox` | `()` | Returns a tuple representing a rectangle (xmin,ymin, xmax,ymax) into which the layer fits. It is not guaranteed to be the smallest such rectangle, but it will often be.
`xBoundsAtY` | `(ybottom[,ytop])` | Finds the minimum and maximum x positions attained by the contour when y is between ybottom and ytop (if ytop is not specified it is assumed the same as ybottom). If the layer does not have any y values in the specified range then ff will return None.
`yBoundsAtX` | `(xleft[,xright])` | Finds the minimum and maximum y positions attained by the contour when x is between xleft and xright (if xright is not specified it is assumed the same as xleft). If the layer does not have any x values in the specified range then ff will return None.
`draw` | `(pen)` | Draw the layer to the pen argument.
Pickling Methods
`__reduce__` | `()` | This function allows the pickler to work on this type. I don't think it is useful for anything else.

glyphPen
> This implements the Pen Protocol to draw into a FontForge glyph. You create a glyphPen with the glyphPen attribute of a glyph. You then draw into it with the operators below.
>     import fontforge;
>     font = fontforge.open("Ambrosia.sfd");	#Open a font
>     pen = font["B"].glyphPen();		# Create a pen to draw into glyph "B"
>     pen.moveTo((100,100));			# draw a square
>     pen.lineTo((100,200));
>     pen.lineTo((200,200));
>     pen.lineTo((200,100));
>     pen.closePath();			# end the contour

>     font["A"].draw(pen);			# or you can copy from one glyph to another
>     					# by having a glyph draw itself into the pen
>     pen = None;				# Finalize the pen. This tells FontForge
>     					# that the drawing is done and causes
>     			                # it to refresh the display (if a UI is active).
This type may not be pickled.
Members
None
Methods
method | args | comments
--- | --- | ---
`moveTo` | `((x,y))` | With one exception this call begins every contor and creates an on curve point at (x,y) as the start point of that contour. This should be the first call after a pen has been created and the call that follows a closePath, endPath.
`lineTo` | `((x,y))` | Draws a line from the last point to (x,y) and adds that to the contour.
`curveTo` | `((cp1.x,cp1.y),(cp2.x,cp2.y),(x,y)) ((cp.x,cp.y),(x,y))` | This routine has slightly different arguments depending on the type of the font. When drawing into a cubic font (PostScript) use the first set of arguments (with two control points -- off curve points -- between each on curve point). When drawing into a quadratic font (TrueType) use the second format with one control point between adjacent on-curve points. The standard appears to support super-bezier curves with more than two control points between on-curve points. FontForge does not. Nor does FontForge allow you to draw a quadratic spline into a cubic font, nor vice versa.
`qCurveTo` | `([(cp.x,cp.y)]*,(x,y)) ([(cp.x,cp.y)]*,None))` | This routine may only be used in quadratic (TrueType) fonts and has two different formats. It is used to express the TrueType idiom where an on-curve point mid-way between its control points may be omitted, leading to a run of off-curve points (with implied but unspecified on-curve points between them). The first format allows an arbetary number of off-curve points followed by one on-curve point. It is possible to have a contour which consists solely of off-curve points. When this happens the contour is NOT started with a moveTo, instead the entire contour, all the off curve points, are listed in one call, and the argument list is terminated by a `None` to indicate there are no on-curve points.
`closePath` | `()` | Closes the contour (connects the last point to the first point to make a loop) and ends it.
`endPath` | `()` | Ends the contour without closing it. This is only relevant if you are stroking contours.
`addComponent` | `(glypn-name,transform)` | Adds a reference (a component) to the glyph. The PostScript transformation matrix is a 6 element tuple.

glyph
Description
The glyph type refers to a fontforge Glyph object. It has no independent life of its own, it always lives within a font. It has all the things you expect to be associated with a glyph: a glyph name, a unicode encoding, a drawing layer, GPOS/GSUB features... This type may not be pickled. This type may not be created directly -- all glyphs are bound to a font and must be created through the font.
Members
member | comments
--- | ---
`activeLayer` | Returns currently active layer in the glyph (as an integer). May be set to an integer or a layer name to change the active layer.
`altuni` | Returns additional unicode code points for this glyph. For a primary code point, see unicode. Returns either None or a tuple of alternate encodings. Each alternate encoding is a tuple of `(unicode-value, variation-selector, reserved-field)` The first is an unicode value of this alternate code point. The second is an integer for variation selector and can be set to -1 if not used. The third is an empty field reserved for future use and currently must be set to zero. `glyph.altuni can be set to None to clear all alternates, or to a tuple. The elements of the tuple may be either integers (an alternate unicode value with no variation selector) or a tuple with up to 3 values in it as explained above.`
`anchorPoints` | Returns the list of anchor points in the glyph. Each anchor point is a tuple of `(anchor-class-name, type, x,y [,ligature-index])` The first two are strings, the next two doubles, and the last (which is only present if type=="ligature") is an integer. Type may be mark base ligature basemark entry exit
`anchorPointsWithSel` | Same as the above, except also includes whether the anchor point is selected in the UI. Returns a tuple of all anchor points in the glyph. Each anchor point is a tuple of `(anchor-class-name, type, x,y, selected [,ligature-index])` The first two are strings, the next two doubles, then a boolean, and the last (which is only present if type=="ligature") is an integer. Type may be mark base ligature basemark entry exit
`background` | The glyph's background layer. This is a copy of the glyph's data. See also foreground, and layers.
`changed` | Whether this glyph has been modified. This is (should be) maintained automatically, but you may set it if you wish.
`color` | The color of the glyph in the fontview. A 6 hex-digit RGB number or -1 for default. 0xffffff is white, 0x0000ff is blue, etc.
`comment` | Any comment you wish to associate with the glyph. UTF-8
`dhints` | A tuple with one entry for each diagonal stem hint. Each stem hint is itself represented by a tuple of three coordinate pairs (themselves tuples of two numbers), these three are: a point on one side of the stem, a point on the other side, and a unit vector pointing in the stem's direction.
`encoding` | Returns the glyph's encoding in the font's encoding. (readonly) If the glyph has multiple encodings, one will be picked at random. If the glyph is not in the font's encoding then a number will be returned beyond the encoding size (or in some cases -1 will be returned).
`font` | The font containing this glyph. (readonly)
`foreground` | The glyph's foreground layer. This is a copy of the glyph's data. See also background, layers and references.
`glyphclass` | An opentype glyphclass, one of automatic, noclass, baseglyph, baseligature, mark, component
`glyphname` | The name of the glyph
`hhints` | A tuple of all horizontal postscript hints. Each hint is itself a tuple of starting locations and widths.
`horizontalComponents` | A tuple of tuples. This allows constructing very large versions of the glyph by stacking the componants together. Some components may be repeated so there is no bound on the size. This is different from horizontalVariants which expects prebuilt glyphs of various fixed sizes. The components are stacked in the order they appear in the (top-level) tuple. Each sub-tuple represents information on one component. The subtuple should contain: (String glyph-name, Boolean is-extender, Int startConnectorLength, Int endConnectorLength, Int fullAdvance). Any of these may be omitted (except the glyph name) and will be assumed to be 0 if so.
`horizontalComponentItalicCorrection` | The italic correction for any composite glyph made with the horizontalComponents.
`horizontalVariants` | A string containing a list of glyph names. These are alternate forms of the current glyph for use in typesetting math. Presumably the variants are of different sizes. Although ff will always return a string of glyph names, you may assign to it with a tuple of glyphs and ff will convert that to corresponding names.
`isExtendedShape` | A boolean containing the MATH "is extended shape" field.
`italicCorrection` | The glyph's italic correction field. Used by both TeX and MATH. The special value of -32768 (0x8000) means the value is unspecified (An unspecified value will not go into the output tables, a value of 0 will)
`layer_cnt` | The number of layers in this glyph. (Cannot be set)
`layers` | A dictionary like object containing the layers of the glyph. It may be indexed by either a layer name, or an integer between 0 and `glyph.layer_cnt-1` to produce a Layer object. Layer 0 is the background layer. Layer 1 is the foreground layer.
`layerrefs` | A dictionary like object containing the references in the layers of the glyph. It may be indexed by either a layer name, or an integer between 0 and `glyph.layer_cnt-1` to produce a reference tuple object. Layer 0 is the background layer. Layer 1 is the foreground layer.
`lcarets` | A tuple containing the glyph's ligature caret locations. Setting this will also either enable or disable the "Default Ligature Caret Count" flag depending from the number of elements in the tuple.
`left_side_bearing` | The left side bearing of the glyph. Setting this value will adjust all layers so that guides in the background etc will be adjusted with the rest of the glyph
`manualHints` | The glyph's hints have been set by hand, and the glyph should not be autohinted without a specific request from the user. The "Don't AutoHint" flag.
`mathKern.bottomLeft` | The glyph's math kerning data associated with the bottom left vertex. This returns a tuple of two element tuples, each of which contains a kerning offset and an associated height (in the last entry the height term is meaningless, but present).
`mathKern.bottomRight` | The glyph's math kerning data associated with the bottom right vertex. This returns a tuple of two element tuples, each of which contains a kerning offset and an associated height (in the last entry the height term is meaningless, but present).
`mathKern.topLeft` | The glyph's math kerning data associated with the top left vertex. This returns a tuple of two element tuples, each of which contains a kerning offset and an associated height (in the last entry the height term is meaningless, but present).
`mathKern.topRight` | The glyph's math kerning data associated with the top right vertex. This returns a tuple of two element tuples, each of which contains a kerning offset and an associated height (in the last entry the height term is meaningless, but present).
`originalgid` | The GID of this glyph in the font it was read from. (readonly)
`persistent` | Whatever you want (these data will be saved as a pickled object in the sfd file. It is your job to insure that whatever you put here can be pickled). See also the temporary field.
`references` | A tuple of tuples containing glyph-name and a transformation matrix for each reference in the foreground. See also foreground and layerrefs.
`right_side_bearing` | The right side bearing of the glyph
`script` | A string containing the OpenType 4 letter tag for the script associated with this glyph (readonly)
`temporary` | Whatever you want (these data will be lost once the font is closed) See also the persistent field.
`texheight` | The Tex height. The special value of -32768 (0x8000) means the field is unspecified (An unspecified value will not go into the output tables, a value of 0 will)
`texdepth` | The Tex depth. The special value of -32768 (0x8000) means the field is unspecified (An unspecified value will not go into the output tables, a value of 0 will)
`topaccent` | The glyph's top accent position field. Used by MATH. The special value of -32768 (0x8000) means the field is unspecified (An unspecified value will not go into the output tables, a value of 0 will)
`ttinstrs` | Any truetype instructions, returned as a binary string
`unicode` | The glyph's unicode code point, or -1. In addition to this primary mapping, a glyph can have multiple secondary mappings - see altuni.
`unlinkRmOvrlpSave` | A flag that indicates the glyph's references should be unlinked and remove overlap run on it before the font is saved (and then the original references replaced after the save finishes)
`userdata` | Deprecated name for temporary field above
`vhints` | A tuple of all vertical postscript hints. Each hint is itself a tuple of starting locations and widths.
`validation_state` | A bit mask indicating some problems this glyph might have. (readonly)
0x1 | If set then this glyph has been validated. If unset then other bits are meaningless.
0x2 | Glyph has an open contour.
0x4 | Glyph intersects itself somewhere.
0x8 | At least one contour is drawn in the wrong direction
0x10 | At least one reference in the glyph has been flipped (and so is drawn in the wrong direction)
0x20 | Missing extrema
0x40 | A glyph name referred to from this glyph, in an opentype table, is not present in the font.
0x40000 | Points (or control points) are too far apart. (Coordinates must be within 32767)
PostScript only
0x80 | PostScript has a limit of 1500 points in a glyph.
0x100 | PostScript has a limit of 96 hints in a glyph.
0x200 | Invalid glyph name.
TrueType only, errors in original file
0x400 | More points in a glyph than allowed in 'maxp'
0x800 | More paths in a glyph than allowed in 'maxp'
0x1000 | More points in a composite glyph than allowed in 'maxp'
0x2000 | More paths in a composite glyph than allowed in 'maxp'
0x4000 | Instructions longer than allowed in 'maxp'
0x8000 | More references in a glyph than allowed in 'maxp'
0x10000 | References nested more deeply than allowed in 'maxp'
0x40000 | Points too far apart. TrueType and Type2 fonts are limited to 16 bit numbers, and so adjacent points must be within 32767 em-units of each other.
0x80000 | Points non-integral. TrueType points and control points must be integer aligned. (FontForge will round them if they aren't)
0x100000 | Missing anchor. According to the opentype spec, if a glyph contains an anchor point for one anchor class in a subtable, it must contain anchor points for all anchor classes in the subtable. Even it, logically, they do not apply and are unnecessary.
0x200000 | Duplicate glyph name. Two (or more) glyphs in this font have the same name. When outputting a PostScript font only one of them will ever be seen. It's a little hard to detect this in normal use, but if you change the encoding to "Glyph Order", and then use Edit->Select->Wildcard and enter the glyph name, both of them should be selected.
0x400000 | Duplicate unicode code point. Two (or more) glyphs in this font have the code point. When outputting an sfnt (TrueType/OpenType) font only one of them will ever be seen. It's a little hard to detect this in normal use, but if you change the encoding to "Glyph Order", and then use Edit->Select->Wildcard and enter the code point, both of them should be selected.
0x800000 | Overlapped hints. Either the glyph has no hint masks and there are overlapped hints, or a hint mask specifies two overlapping hints.
`verticalComponents` | A tuple of tuples. This allows constructing very large versions of the glyph by stacking the componants together. Some components may be repeated so there is no bound on the size. This is different from verticalVariants which expects prebuilt glyphs of various fixed sizes. The components are stacked in the order they appear in the (top-level) tuple. Each sub-tuple represents information on one component. The subtuple should contain: (String glyph-name, Boolean is-extender, Int startConnectorLength, Int endConnectorLength, Int fullAdvance). Any of these may be omitted (except the glyph name) and will be assumed to be 0 if so.
`verticalComponentItalicCorrection` | The italic correction for any composite glyph made with the verticalComponents.
`verticalVariants` | A string containing a list of glyph names. These are alternate forms of the current glyph for use in typesetting math. Presumably the variants are of different sizes.
`width` | The advance width of the glyph. See also vwidth.
`vwidth` | The vertical advance width of the glyph. See also width.
Methods
method | args | comments
`addAnchorPoint` | `(anchor-class-name, anchor-type, x,y [,ligature-index])` | Adds an anchor point. anchor-type may be one of the strings "mark" "base" "ligature" "basemark" "entry" "exit" If there is an anchor point with the same anchor-class-name and: lookup type is "gpos_mark2base" or lookup type is "gpos_mark2ligature" and ligature-index is the same or anchor-type is the same then the existing anchor will be overwritten.
`addExtrema` | `([flags,emsize])` | Extrema should be marked by on-curve points. If a curve lacks a point at an extrema this command will add one. Flags may be one of the following strings all Add all missing extrema only_good Only add extrema on longer splines (with respect to the em-size) only_good_rm As above but also merge away on-curve points which are very close to, but not on, an added extremum
`addReference` | `(glyph-name[,transform])` | Adds a reference to the specified glyph into the current glyph. Optionally specifying a transformation matrix
`addHint` | `(is-vertical,start,width)` | Adds a postscript hint. Takes a boolean flag indicating whether the hint is horizontal or vertical, a start location and the hint's width.
`addPosSub` | `(subtable-name,variant) (subtable-name,variants) (subtable-name,ligature-components) (subtable-name,xoff,yoff,xadv,yadv) (subtable-name,other-glyph-name,kerning) (subtable-name,other-glyph-name, xoff1,yoff1,xadv1,yadv1, xoff2,yoff2,xadv2,yadv2)` | Adds position/substitution data to the glyph. The number and type of the arguments vary acording to the type of the lookup containing the subtable. The first argument should always be a lookup subtable name. If the lookup is for single substitutions then the second argument should be a string containing a single glyph name. For multiple and alternated substitutions a tuple of glyph names. For ligatures, a tuple of the ligature components (glyph names). For single positionings the second through fifth arguments should be small integers representing the adjustment along the appropriate axis. For pairwise positionings (kerning) the second argument should be the name of the other glyph being kerned with, and the third through tenth should be small integers -- or, if there are exactly three arguments then the third specifies traditional, one-axis, kerning If there is a previously existing entry, this will replace it (except for ligatures).
`appendAccent` | `(name="glyph-name") (unicode=<codepoint>)` | Makes a reference to the specified glyph, adds that reference to the current layer of this glyph, and positions it to make a reasonable accent.
`autoHint` | `()` | Generates PostScript hints for this glyph.
`autoInstr` | `()` | Generates TrueType instructions for this glyph.
`autoTrace` | `()` | Auto traces any background images
`boundingBox` | `()` | Returns a tuple representing a rectangle (xmin,ymin, xmax,ymax) which is the minimum bounding box of the glyph.
`build` | `()` | If the character is a composite character, then clears it and inserts references to its components
`canonicalContours` | `()` | Orders the contours in the current glyph by the x coordinate of their leftmost point. (This can reduce the size of the charstring needed to describe the glyph(s).
`canonicalStart` | `()` | Sets the start point of all the contours of the current glyph to be the leftmost point on the contour. (If there are several points with that value then use the one which is closest to the baseline). This can reduce the size of the charstring needed to describe the glyph(s). By regularizing things it can also make more things available to be put in subroutines.
`changeWeight` | `(stroke_width[,type, serif_height,serif_fuzz, counter_type,custom_zones])` | See the Element->Style->Change Width command for a more complete description of these arguments. Stroke_width is the amount by which all stems are expanded. Type is one of "LCG", "CJK", "auto", "custom". Serif_height tells ff not to expand serifs which are that much off the baseline, while serif_fuzz specifies the amount of fuzziness allowed in the match. If you don't want special serif behavior set this to 0. Counter_type is one of "squish", "retain", "auto". Custom_zones is only meaningful if the type argument were "custom". It may be either a number, which specifies the "top hint" value (bottom hint is assumed to be 0, others are between), or a tuple of 4 numbers (top hint, top zone, bottom zone, bottom hint).
`condenseExtend` | `(c_factor,c_add[,sb_factor,sb_add,correct])` | Condenses or extends the size of the counters and side-bearings of the glyph. The first two arguments provide information on shrinking/growing the counters, the second two the sidebearings. If the last two are omitted they default to the same values as the first two. A counter's width will become: `new_width = c_factor * old_width + c_add` If present the `correct` argument allows you to specify whether you want to correct for the italic angle before condensing the glyph. (it defaults to True)
`clear` | `()` | Clears the contents of the glyph (and marks it as not worth outputting).
`cluster` | `([within,max])` | Moves clustered coordinates to a standard central value. See also round.
`correctDirection` | `()` | Orients all contours so that external ones are clockwise and internal counter-clockwise.
`exclude` | `(excluded-layer)` | Removes the excluded area from the current glyph. Takes an argument which is a layer. See also removeOverlap and intersect.
`export` |
`(filename[,pixelsize,bitdepth])` | bitmap images
`(filename[,layer])` | vector outlines
| Uses the file's extension to determine output file type. Exports outline formats to the file. For bitmap formats it will rasterize the glyph and output that. There are different optional arguments for rasterizing images and for direct outline output. bitdepth must be 1 or 8.
`getPosSub` | `(lookup-subtable-name)` | Returns any positioning/substitution data attached to the glyph controlled by the lookup-subtable. If the name is "*" then returns data from all subtables. The data are returned as a tuple of tuples. The first element of the subtuples is the name of the lookup-subtable. The second element will be one of the strings: "Position", "Pair", "Substitution", "AltSubs", "MultSubs","Ligature". Positioning data will be followed by four small integers representing adjustments to the: x position of the glyph, the y position, the horizontal advance, and the vertical advance. Pair data will be followed by the name of the other glyph in the pair and then eight small integers representing adjustments to the: x position of the first glyph, the y position, the horizontal advance, and the vertical advance, and then a similar foursome for the second glyph. Substitution data will be followed by a string containing the name of the glyph to replace the current one. Multiple and Alternate data will be followed by several strings each containing the name of a replacement glyph. Ligature data will be followed by several strings each containing the name of a ligature component glyph.
`importOutlines` | `(filename,[flags])` | Uses the file's extension to determine behavior. Imports outline descriptions (eps, svg, glif files) into the forground layer. Imports image descriptions (bmp, png, xbm, etc.) into the background layer. Optionally, flags can be used to control PostScript import, it'll be ignored for other file types. Flags is a tuple of the following strings toobigwarn Supress warning window about too big stroke width removeoverlap When FontForge detects that an expanded stroke will self-intersect, then setting this flag will cause it to try to make things nice by removing the intersections handle_eraser Certain programs use pens with white ink as erasers. When this flag is set, FontForge will attempt to simulate that. correctdir
`intersect` | `()` | Leaves only areas in the intersection of contours. See also removeOverlap and exclude.
`isWorthOutputting` | `()` | Returns whether the glyph is worth outputting into a font file. Basically a glyph is worth outputting if it contains any contours, or references or has had its width set.
`preserveLayerAsUndo` | `([layer,dohints])` | Normally undo handling is turned off during python scripting. If you wish you may tell fontforge to preserve the current state of a layer so that whatever you do later can be undone by the user. You may omit the layer parameter (in which case the currently active layer will be used). You may also request that hints be preserved (they are not, by default).
`removeOverlap` | `()` | Removes overlapping areas. See also intersect and exclude.
`removePosSub` | `(lookup-subtable-name)` | Removes all data from the glyph corresponding to the given lookup-subtable. If the name is "*" then all data will be removed.
`round` | `([factor])` | Rounds the x and y coordinates of each point in the glyph. If factor is specified then new-coord = round(factor*old-coord)/factor. See also cluster.
`selfIntersects` | `()` | Returns whether any of the contours in this glyph intersects any other contour in the glyph (including itself).
`simplify` | `([error-bound,flags,tan_bounds, linefixup,linelenmax])` | Tries to remove excess points in the glyph if doing so will not perturb the curve by more than `error-bound`. Flags is a tuple of the following strings ignoreslopes Allow slopes to change ignoreextrema Allow removal of extrema smoothcurves Allow curve smoothing choosehv Snap to horizontal or vertical forcelines flatten bumps on lines nearlyhvlines Make nearly horizontal/vertical lines be so mergelines Merge adjacent lines into one setstarttoextremum Rotate the point list so that the start point is on an extremum removesingletonpoints If the contour contains just one point then remove it
`stroke` | `("circular",width[,linecap,linejoin,flags]) ("eliptical",width,minor-width,angle [,linecap,linejoin,flags]) ("caligraphic",width,height,angle[,flags]) ("polygonal",contour[,flags])` | Strokes the contours of the glyph using one of the indicated pens. Line cap may be one of butt round square line join may be miter round bevel flags is a tuple containing some of the following strings removeinternal removeexternal cleanup If a polygonal pen is specified, the contour must be a closed convex polygon (no curved edges) with fewer than 100 vertices.
`transform` | `(matrix[,flags])` | Transforms the glyph by the matrix. The optional flags argument should be a tuple containing any of the following strings: partialRefs -- Don't transform any references in the glyph, but do transform their offsets. This is useful if the refered glyph will be (or has been) transformed. round -- Round to int after the transformation is done.
`nltransform` | `(xexpr,yexpr)` | xexpr and yexpr are strings specifying non-linear transformations that will be applied to all points in the current layer (with xexpr being applied to x values, and yexpr to y values, of course). The syntax for the expressions is explained in the non-linear transform dialog.
`unlinkRef` | `([ref-name])` | Unlinks the reference to the glyph named `ref-name`. If `ref-name` is omitted, unlinks all references.
`unlinkThisGlyph` | `()` | Unlinks all the references to the current glyph within any other glyph in the font.
`useRefsMetrics` | `(ref-name[,flag])` | Finds a reference with the given name and sets the "use_my_metrics" flag on it (so this glyph will have the same advance width as the glyph the reference points to). If the optional flag argument is False, then the glyph will no longer have its metrics bound to the reference.
`validate` | `([force])` | Validates the glyph and returns the `validation_state` of the glyph (except bit 0x1 will always be clear). If the glyph passed the validation then the return value will be 0 (not 0x1). Otherwise the return value will be the set of errors found. If force is specified true this will always be validated, if force is unspecified (or specified as false) then it will return the cached value if it is known, otherwise will validate it.
`draw` | `(pen)` | Draw the glyph's outline to the pen argument.
`glyphPen` | `([replace=False])` | Creates a new glyphPen which will draw into the current glyph. By default the pen will replace any existing contours and references, but setting the optional keyword argument, `replace` to false will retain the old contents.
Note: Glyphs do not have an independent existence. They live in fonts. You may not create them with stand-alone, only in the context of a font. See font.createChar

selection
> This represents a font's selection. You may index it with an encoding value (in the encoding ISO-646-US (ASCII) the character "A" has encoding index 65), or with a glyph's name, or with a string like "uXXXXX" where XXXXX represent the glyph's unicode codepoint in hex, or with a fontforge glyph object. The value of indexing into a selection will be either True or False.
>     >>> print fontforge.activeFont().selection[65]
>     True
This type may not be pickled.
Members
member | comments
--- | ---
`byGlyphs` | Returns another selection, just the same as this one except that its iterator function will return glyphs (rather than encoding slots) and will only return those entries for which glyphs exist. (This is read only)
Iterator Protocol
`__iter__` | `()` | Returns an iterator for the selection which will return all selected encoding slots in encoding order.
Methods
method | args | comments
`all` | `()` | Select everything.
`none` | `()` | Deselect everything.
`changed` | `()` | Select all glyphs which have changed.
`invert` | `()` | Invert the selection.
`select` | `(args)` | There may be an arbitrary number of arguments. Each argument may be either: A glyph name Note: There need not be a glyph with this name in the font yet, but if you use a standard name (like "A") fontforge will still know where that glyph should be. An integer (this will be interpreted as either an encoding index or (default) a unicode code point depending on the flags). A fontforge glyph. A tuple of flags. (If you wish to specify a single flag it must still be in a tuple, and you must append a trailing comma to the flag (so `("more",)` rather than just `("more")`). FF needs the flags to be in a tuple otherwise it can't distinguish them from glyph names) unicode Interpret integer arguments as unicode code points encoding Interpret integer arguments as encoding indeces. more Specified items should be selected less Specified items should be deselected. singletons Specified items should be interpreted individually and mean the obvious. ranges Specified items should be interpreted in pairs and represent all encoding slots between the start and end points specified by the pair. So `.select(("ranges",None),"A","Z")` would select all the upper case (latin) letters. If the first argument is not a flag argument (or if it doesn't specify either "more" or "less") then the selection will be cleared. So `.select("A")` would produce a selection with only "A" selected, `.select(("more",None),"A")` would add "A" to the current selection, while `.select(("less",None),"A")` would remove "A" from the current selection.

private
This represents a font's postscript private dictionary. You may index it with one of the standard names of things that live in the private dictionary. This type may not be pickled.
Iterator Protocol
`__iter__` | `()` | Returns an iterator for the dictionary which will return all entres.
Methods
method | args | comments
--- | --- | ---
`guess` | `(name)` | Guess a value for this this entry in the private dictionary. If fontforge can't make a guess it will simply ignore the request.

math
This represents a font's math constant table. Not all fonts have math tables, and checking this field will not create the underlying object, but examining or assigning to its members will create it.. This type may not be pickled.
Members
Any of the math constant names may be used as member names. The list is long, and I shall not copy them all. Here is a subset `ScriptPercentScaleDown ScriptScriptPercentScaleDown DelimitedSubFormulaMinHeight ...` (These names begin with capital letters, not Python's conventions but Microsoft's) These all take (16 bit) integer values. I do not currently provide python access to any associated device tables.
Methods
method | args | comments
--- | --- | ---
`exists` | `()` | Returns whether the font currently has an underlying math table associated with it. Note that examining or assigning to one of the members will create such a table.
`clear` | `()` | Removes any underlying math table from the font.

font
Description
The font type refers to a fontforge Font object. It generally contains a list of glyphs, an encoding to order those glyphs, a fontname, a list of GPOS/GSUB lookups and many other things. This type may not be pickled.
Creation
`fontforge.font` | `()` | Creates a new font
Members
member | comments
--- | ---
`activeLayer` | Returns currently active layer in the font (as an integer). May be set to an integer or a layer name to change the active layer.
`ascent` | The font's ascent
`bitmapSizes` | A tuple with an entry for each bitmap strike attached to the font. Each strike is identified by pixelsize (if the strike is a grey scale font it will be indicated by `(bitmap-depth<<16)|pixelsize`. When setting this value pass in a tuple of the same format. Any existing strike not specified in the tuple will be removed. Any new sizes will be created (but not rasterized -- use regenBitmaps for that).
`capHeight` | (readonly) Computes the Cap Height (the height of capital letters such as "E"). A negative number indicates the value could not be computed (the font might have no capital letters because it was lower case only, or didn't include glyphs for a script with capital letters).
`changed` | Bit indicating whether the font has been modified. This is (should be) maintained automatically, but you may set it if you wish.
`cidcopyright` | Copyright message of the cid-keyed font as a whole (ie. not the current subfont).
`cidfamilyname` | Family name of the cid-keyed font as a whole (ie. not the current subfont).
`cidfontname` | Font name of the cid-keyed font as a whole (ie. not the current subfont).
`cidfullname` | Full name of the cid-keyed font as a whole (ie. not the current subfont).
`cidordering` |
`cidregistry` |
`cidsubfont` | Returns the number index of the current subfont in the cid-keyed font (or -1 if this is not a cid-keyed font). May be set to an index (an integer) or a subfont fontname (a string) to change the current subfont. (To find the name of the current subfont, simply use .fontname).
`cidsubfontcnt` | Returns the number of subfonts in this cid-keyed font (or 0 if it is not a cid-keyed font)
`cidsubfontnames` | Returns a tuple of the subfont names in this cid-keyed font (or None if it is not a cid-keyed font)
`cidsupplement` |
`cidversion` |
`cidweight` | Weight of the cid-keyed font as a whole
`comment` | A comment associated with the font. Can be anything.
`copyright` | PostScript copyright notice
`cvt` | Returns a sequence object containing the font's cvt table. Changes made to this object will be made to the font (this is a reference not a copy). The object has one additional method cvt.find(value[,low,high]) which finds the index of value in the cvt table (or -1 if not found). If low and high are specified then the index will be between [low,high).
`default_base_filename` | The default base for the filename when generating a font
`descent` | The font's descent
`design_size` | Size (in pica points) for which this font was designed.
`em` | The em size of the font. Setting this will scale the entire font to the new size.
`encoding` | The name of the current encoding. Setting it will change the encoding used for indexing
`familyname` | PostScript font family name
`fondname` | Mac fond name
`fontlog` | A comment associated with the font. Can be anything.
`fontname` | PostScript font name Note that in a CID keyed font this will be the name of the current subfont. Use cidfontname for the name of the font as a whole.
`fullname` | PostScript font name
`gasp` | Returns a tuple of all gasp table entries. Each item in the tuple is itself a tuple composed of a ppem (an integer) and a tuple of flags. The flags are a chosen from: gridfit antialias symmetric-smoothing gridfit+smoothing
`gasp_version` | The version of the 'gasp' table. Currently this may be 0 or 1.
`gpos_lookups` | Returns a tuple of all positioning lookup names in the font. This member cannot be set.
`gsub_lookups` | Returns a tuple of all substitution lookup names in the font. This member cannot be set.
`guide` | A copy of the font's guide layer
`hasvmetrics`
`head_optimized_for_cleartype`
`hhea_ascent`
`hhea_ascent_add`
`hhea_descent`
`hhea_descent_add`
`hhea_linegap`
> `horizontalBaseline` | Returns a tuple of tuples containing the horizontal baseline information in the font (the 'BASE' table). If there is no information NONE will be returned, otherwise the format of the tuple is: `((tuple of baseline tags used), (tuple of script information))` The `(tuple of baseline tags used)` is simply a tuple of 4 letter strings as `("hang", "ideo", "romn")` these are standard baseline tag names as defined in the opentype spec. The number of entries here, and their order is important as there will be subsequent tuples (in the script tuple) which use the same ordering. The `(tuple of script information)` is again a tuple of `script information` tuples. A `script information` tuple looks like `(script-tag,default-baseline-tag, (tuple of baseline positions), (tuple of language extents))` If there are no baseline tags defined (an empty tuple), then the `default-baseline-tag` and the `(tuple of baseline positions)` will be NONE. Otherwise both tags will be 4 character strings, and the `(tuple of baseline positions)` will be a tuple of numbers (in the same order as the `(tuple of baseline tags used)` above) specifying the relative positions of each baseline for this script. A `(tuple of language extents)` is a tuple of `language extent` tuples. A `language extent` tuple is `(language-tag,min-extent,max-extent, (tuple of feature extents))` `language-tag` is a 4 letter string specifying an opentype language,`min`/`max-extent` are numbers specifying how far above and below the baseline characters go in this script/language. A `(tuple of feature extents>` is a tuple of `feature extent` tuples. A `feature extent` tuple is `(feature-tag,min-extent,max-extent, (tuple of feature extents))` `feature-tag` is a 4 letter string specifying an opentype (GPOS or GSUB) feature tag,`min`/`max-extent` are numbers specifying how far above and below the baseline characters go in this script/language with the feature applied. Example:
>     (("hang","ideo","romn"),
>       (("cyrl","romn",(1405,-288,0),()),
>        ("grek","romn",(1405,-288,0),()),
>        ("latn","romn",(1405,-288,0),
>         ("dflt",-576,1913,
>          ("NoAc",-576,1482))
>         ("ENG ",-576,1482,())
>        )
>       )
>     )
`is_cid` | Indicates whether the font is a cid-keyed font or not. (Read-only)
`is_quadratic` | Deprecated. Whether the contours should be interpretted as a set of quadratic or cubic splines. Setting this value has the side effect of converting the entire font into the other format Now each layer may have its own setting for this value, which should be set on the font's layers object.
`isnew` | A flag indicating that this is a new font
`italicangle`
`macstyle` |
              Bit 0: Bold (if set to 1);
              Bit 1: Italic (if set to 1)
              Bit 2: Underline (if set to 1)
              Bit 3: Outline (if set to 1)
              Bit 4: Shadow (if set to 1)
              Bit 5: Condensed (if set to 1)
              Bit 6: Extended (if set to 1)
              Bits 7-15: Reserved (set to 0).
(source)
`layer_cnt` | The number of layers in the font. (Read only. Can change using `add` and `del` operations on the layers array)
`layers` | Returns a dictionary like object with information on the layers of the font -- a name and a boolean indicating whether the layer is quadratic or not. You may remove a layer with `del font.layers["unneeded layer"]`; You may add a new layer with `font.layers.add("layer-name",is_quadratic[, is_background])`; You may change a layer's name with `font.layers["layer"].name = "new-name"`; You may change the type of splines in a layer with `font.layers["layer"].is_quadratic = True`; You may change whether it is a background layer by `font.layers["layer"].is_background = True`; Note: The layers that live in the font are different from layers that live in a glyph. These objects do not have the Layer type documented earlier.
`loadState` | A bitmask indicating non-fatal errors found when loading the font. (readonly)
0x01 | Bad PostScript entry in 'name' table
0x02 | Bad 'glyf' or 'loca' table
0x04 | Bad 'CFF ' table
0x08 | Bad 'hhea', 'hmtx', 'vhea' or 'vmtx' table
0x10 | Bad 'cmap' table
0x20 | Bad 'EBLC', 'bloc', 'EBDT' or 'bdat' (embedded bitmap) table
0x40 | Bad Apple GX advanced typography table
0x80 | Bad OpenType advanced typography table (GPOS, GSUB, GDEF, BASE)
0x100 | Bad OS/2 version number Windows will reject all fonts with a OS/2 version number of 0 and will reject OT-CFF fonts with a version number of 1
`maxp_FDEFs` | The number of function definitions used by the tt program
`maxp_IDEFs` | The number of instruction definitions used by the tt program
`maxp_maxStackDepth` | The maximum stack depth used by the tt program
`maxp_storageCnt` | The number of storage locations used by the tt program
`maxp_twilightPtCnt` | The number of points in the twilight zone of the tt program
`maxp_zones` | The number of zones used in the tt program
`multilayer`
`onlybitmaps` | A flag indicating that this font only contains bitmaps. No outlines.
`os2_codepages` | A 2 element tuple containing the OS/2 Codepages field
`os2_family_class`
`os2_fstype`
`os2_panose`
`os2_strikeypos`
`os2_strikeysize`
`os2_subxoff`
`os2_subxsize`
`os2_subyoff`
`os2_subysize`
`os2_supxoff`
`os2_supxsize`
`os2_supyoff`
`os2_supysize`
`os2_typoascent`
`os2_typoascent_add`
`os2_typodescent`
`os2_typodescent_add`
`os2_typolinegap`
`os2_use_typo_metrics`
`os2_unicoderanges` | A 4 element tuple containing the OS/2 Unicode Ranges field
`os2_vendor`
`os2_version`
`os2_weight`
`os2_weight_width_slope_only`
`os2_width`
`os2_winascent`
`os2_winascent_add`
`os2_windescent`
`os2_windescent_add`
`path` | (readonly) Returns a string containing the name of the file from which the font was originally read (in this session), or if this is a new font, returns a made up filename in the current directory named something like "Untitled1.sfd". See also sfd_path.
`persistent` | Whatever you want -- though I recommend you store a dict here (these data will be saved as a pickled object in the sfd file. It is your job to insure that whatever you put here can be pickled) If you do store a dict then the following entries will be treated specially:
initScriptString | If present, and if this is a string, then each time the font is loaded from an sfd file, this string will be passed to the python interpretter. Note: This is a string, not a function. Function code cannot be pickled. Since it is a string it will receive no arguments, but the current font will be available in the activeFont method of the fontforge module. This string will be interpretted before the loadFontHook of the module hooks dictionary. One possible behavior for this string is to define function hooks to be stored in the temporary dict described below.
`math` | Returns an object which provides information on the font's underlying math constant table. There is only one of these per font.
`private` | Returns a dictionary like object representing the PostScript private dictionary for the font. Changing entries in this object will change them in the font. (It's a reference, not a copy). There is an iterator associated with this entry.
`privateState` | Checks the (PostScript) Private dictionary and returns a bitmask of some common errors.
0x000001 | Odd number of elements in either the BlueValues or OtherBlues array.
0x000002 | Elements in either the BlueValues or OtherBlues are disordered.
0x000004 | Too many elements in either the BlueValues or OtherBlues array.
0x000008 | Elements in either the BlueValues or OtherBlues array are too close (must be at least 2*BlueFuzz +1 appart.
0x000010 | Elements in either the BlueValues or OtherBlues array are not integers.
0x000020 | Alignment zone height in either the BlueValues or OtherBlues array is too big for the value of BlueScale.
0x000100 | Odd number of elements in either the FamilyBlues or FamilyOtherBlues array.
0x000200 | Elements in either the FamilyBlues or FamilyOtherBlues are disordered.
0x000400 | Too many elements in either the FamilyBlues or FamilyOtherBlues array.
0x000800 | Elements in either the FamilyBlues or FamilyOtherBlues array are too close (must be at least 2*BlueFuzz +1 appart.
0x001000 | Elements in either the FamilyBlues or FamilyOtherBlues array are not integers.
0x002000 | Alignment zone height in either the FamilyBlues or FamilyOtherBlues array is too big for the value of BlueScale.
0x010000 | Missing BlueValues entry.
0x020000 | Bad BlueFuzz entry.
0x040000 | Bad BlueScale entry.
0x080000 | Bad StdHW entry.
0x100000 | Bad StdVW entry.
0x200000 | Bad StemSnapH entry.
0x400000 | Bad StemSnapV entry.
0x800000 | StemSnapH does not include StdHW.
0x1000000 | StemSnapV does not include StdVW.
0x2000000 | Bad BlueShift entry.
`selection` | Returns a reference to an array-like object representing the font's selection. There is one entry for each encoding slot (there may not be a glyph attached to every encoding slot). You may set this with a tuple of integers (or boolean values). There should not be more entries in the tuple than there are encoding slots in the current encoding. A `True` or non-0 value means the slot is selected.
`sfd_path` | (readonly) Returns a string (or None) containing the name of the sfd file associated with this font. Sometimes this will be the same as path (above).
`sfnt_names` | The strings in the sfnt 'name' table. A tuple of all ms names. Each name is itself a tuple of strings (language,strid,string). Language may be either the (english) name of the language/locale, or the number representing that language in MicroSoft's specification. Strid may be one of the (english) string names (Copyright, Family, SubFamily, etc.) or the numeric value of that item. The string itself is in UTF-8. Mac names will be automagically created from ms names
`sfntRevision` | The font revision field stored in the 'head' table of an sfnt. This is documented to be a fixed 16.16 number (that is a 32 bit number with the binary point between bits 15 and 16). The field may be unset (in which case when the font is generated, FontForge will guess a default value from one of the version strings). The value returned with be `None` if the field is unset or a double. You may set it to `None` which "unsets" it, or to a double value, or to an integer. The integer will be treated as a 32 bit integer and right shifted by 16 to get a 16.16 value).
`size_feature` | The OpenType 'size' feature has two formats. It may either represent the design size of the font (and nothing else) or the design size, and range (top and bottom point sizes for which this design works), a style id (used to represent this design size throughout the font family) and a set of language/string pairs used to represent this design size in the menu. If no size information is specified in the font FontForge will return None. If only the design size is specified, FontForge will return a tuple containing a single element: the point size for which the font was designed. (This is returned as a real number -- the field can represent tenths of a point). Otherwise FontForge returns a tuple containing five elements, the design size, the bottom of the design range, the top, the style id and a tuple of tuples. Each sub-tuple is a language/string pair. Language may be either the (english) name of the language/locale, or The string itself is in UTF-8.
`strokedfont` | is this a stroked font?
`strokewidth` | the stroke width of a stroked font
`temporary` | Whatever you want -- though I recommend you store a dict here (these data will be lost once the font is closed) If you do store a dict then the following entries will be treated specially:
generateFontPreHook | If present, and if this is a function it will be called just before a font is generated. It will be called with the font and the filename to which the font will be written.
generateFontPostHook | If present, and if this is a function it will be called just after a font is generated. It will be called with the font and the filename to which the font will be written.
`texparameters` | Returns a tuple of TeX font parameters. TeX font type followed by 22 parameters. Font type is one of: text mathsym mathext unset In case of "unset" default values for font parameters will be returned.
`uniqueid`
`upos` | underline position
`userdata` | Deprecated name for temporary above
`uwidth` | underline width
`version` | PostScript font version string
`verticalBaseline` | Same format as horizontal_baseline, which see.
`vertical_origin` | deprecated
`vhea_linegap`
`weight` | PostScript font weight string
`woffMajor` | The major version number of a woff file, an integer. The field may be unset (in which case when the font is generated, FontForge will guess a default value from one of the version strings). The value returned with be `None` if the field is unset or an integer. You may set it to `None` which "unsets" it, or to an integer.
`woffMinor` | The minor version number of a woff file, an integer. The field may be unset (in which case when the font is generated, FontForge will guess a default value from one of the version strings). The value returned with be `None` if the field is unset or an integer. You may set it to `None` which "unsets" it, or to an integer.
`woffMetadata` | Any metadata associated with a woff file. This is a utf8 string containing unparsed xml.
`xHeight` | (readonly) Computes the X Height (the height of lower case letters such as "x"). A negative number indicates the value could not be computed (the font might have no lower case letters because it was upper case only, or didn't include glyphs for a script with lower case letters).
Iterator Protocol
`__iter__` | `()` | Returns an iterator for the font which will run through the font, in gid order, returning glyph names
`<name> in f` | Returns whether the font contains a glyph with the given name.
Other iterators over the font: | selection, font.find(), font.glyphs()
Mapping Protocol
`len(f)` | The number of glyph slots in the current encoding
`f[i]` | If i is an integer, then returns the glyph at that encoding. If a string then returns the glyph with that name. May not be assigned to.
Methods
method | args | comments
`addAnchorClass` | `(lookup-subtable-name, new-anchor-class-name)` | Adds an anchor class to the specified (anchor) subtable.
`addKerningClass` | `(lookup-name,new-subtable-name, first-classes, second-classes, offsets [,after])` or `(lookup-name,new-subtable-name, separation, first-classes, second-classes [,onlyCloser,autokern,after])` or `(lookup-name,new-subtable-name, separation,class-distance, ,first-glyph-list, second-glyph-list, [,onlyCloser,autokern,after])` or `(lookup-name,new-subtable-name, separation,class-distance, [,onlyCloser,autokern,after])` | Creates a new subtable and a new kerning class in the named lookup. The classes arguments are tuples of tuples of glyph names (each sub-tuble of glyph names is a kerning class). The offsets argument is a tuple of kerning offsets. There must be as many entries as `len(first-class)*len(second-class)`. The optional after argument is used to specify the order of the subtable within the lookup. The second format will cause FontForge to auto kern the subtable. The separation argument specifies the desired optical distance between any two glyphs (if this is specified as 0 then the kerning class will be designed so glyphs just touch each other). Again the user specifies two sets of predefined classes. If the (optional) `onlyCloser` flag is set true then only negative kerning values will be inserted into the table. In the third format the user merely specifies two lists of glyphs to be used, fontforge will look for similarities among among the glyphs and guess at classes. The class-distance argument to determine how precise the classes should match (1 is very tight matching, 20 is rather loose). In the last format the font's selection will be used to specify the list of glyphs to be examined (and the same list will be used for both the left and right glyphs -- but fontforge will probably find different classes).
`addLookup` | `(new-lookup-name,type,flags, feature-script-lang-tuple [,after-lookup-name)` | Creates a new lookup with the given name, type and flags. It will tag it with any indicated features. The type of one of gsub_single gsub_multiple gsub_alternate gsub_ligature gsub_context gsub_contextchain gsub_revesechain morx_indic morx_context morx_insert gpos_single gpos_pair gpos_cursive gpos_mark2base gpos_mark2ligature gpos_mark2mark gpos_context gpos_contextchain kern_statemachine The flags argument is a tuple of strings. At most one of these strings may be the name of a mark class. The others are: right_to_left ignore_bases ignore_ligatures ignore_marks A feature-script-lang tuple is a tuple with one entry for each feature (there may be no entries if there are no features). Each entry is itself a two element tuple, the first entry is a string containing a 4 letter feature tag, and the second entry is another tuple (potentially empty) with an entry for each script for which the feature is active. Each entry here is itself a two element tuple. The first element is a 4 letter script tag and the second is a tuple of languages. Each entry in the language tuple is a four letter language. Example: (("liga",(("latn",("dflt")),)),) The optional final argument allows you to specify the ordering of the lookup. If not specified the lookup will be come the first lookup in its table.
`addLookupSubtable` | `(lookup-name, new-subtable-name [,after-subtable-name])` | Creates a new subtable within the specified lookup. The lookup name should be a string specifying an existing lookup. The subtable name should also be a string and should not match any currently existing subtable in the lookup. The optional final argument allows you to specify the ordering within the lookup. If not specified this subtable will be first in the lookup. If you want to create a subtable in a contextual lookup, then use `addContextualSubtable` below. If you want to create a kerning class subtable, then use `addKerningClass` above.
`addContextualSubtable` | `(lookup-name, new-subtable-name type rule [,afterSubtable=] [,bclasses=] [,mclasses=] [,fclasses=] [,bclassnames=] [,mclassnames=] [,fclassnames=] )` | Creates a new subtable within the specified contextual lookup (contextual, contextual chaining, or reverse contextual chaining). The lookup name should be a string specifying an existing lookup. The subtable name should also be a string and should not match any currently existing subtable in the lookup. The `type` should be one of the strings "glyph", "class", "coverage" or "reversecoverage". The `rule` should be a string specifying a string to match and a set of lookups to apply once the match has been made. (See below for more details). The remaining arguments are optional, keyword arguments. `afterSubtable=`, if present this should be followed by a string, the name of a subtable after which this one is to be placed in the lookup. If not specified this subtable will be first in the lookup. `bclasses=, fclasses=, mclasses=` these three arguments specify sets of glyph classes for when `type="class"`. They should be a tuple of thingies where each thingy is either a string containing a list of space separated glyph names, or another tuple containing a set of strings, each a glyph name. Note that the first class is magic and should usually be left as a null string. `bclassnames=, fclassnames=, mclassnames=` These provide names for the glyph classes described above. These names are optional, but can be convenient. These are tuples of strings. There should be the same number of entries in `bclassnames` as there are in `bclasses`. When `type="glyph"` The rule should look something like: `glyph-name1 glyph-name2 | glyph-name3 @<lookup-name> | glyph-name4` The "|"s divide between backtrack, match and lookahead sections. So this example would match it the current glyph were named `glyph-name3` and it were preceded by `glyph-name2` and that by `glyph-name1` and followed by `glyph-name4`. If the match were successful then the lookup named `lookup-name` would be applied. The @<> are litteral characters and should be present in the rule. If the invoked lookup is a ligature lookup then it should be invoked after the first glyph that forms the lookup (rather than the last) and all glyphs that might make up the lookup should be in the match section. So... `e | f @ f l | o` would only apply the `ff-lig` lookup if the `ffl` were preceeded by `e` and followed by `o`. When `type="class"` The rule should look something like: `class-name1 class-name2 | class-name3 @<lookup-name> | class-name4` Very similar to the case of glyphs, except that instead of glyph names we have class names here. It is possible to have different sets of class names in the three different sections (backtrack, match and lookahead). If you don't specify any class names then you must use numbers instead, each number refering to the class at that position in the tuple (the first class will be class 0, the second class 1, and so on). When `type="coverage"` The rule should look something like: `[g1 g2] [g3 g4] | [g5 g6 g7] @<lookup-name> | [g8 g9]` Each entry within brackets, `[]`, represents a coverage table and should be a list of glyph names. The brackets are specified literally. When `type="reversecoverage"` The rule should look something like: `[g1 g2] [g3 g4] | [g5 g6 g7] => [rg1 rg2 rg3] | [g8 g9]` Very similar to normal coverage tables except that instead of specifying a lookup there are replacement glyphs inline. There must be the same number of replacement glyphs (`rg1, rg2, rg3`) as match glyphs (`g5, g6, g7`) and there may be only one coverage table in the match section. WARNING This format has some limitations, if there are multiple lookups they will be applied in textual order (First lookup in the string is the first one applied). This limitation is also present in Adobe's feature files so I hope it shan't be a severe limitation.
`addSmallCaps` | `(scheight=, capheight=, lcstem=, ucstem=, symbols=, letter_extension=, symbol_extension=, stem_height_factor=)` | This function uses keyword parameters. None is required, if omitted a default value will be used (generally found by analyzing the font). For each selected letter, this function will create a corresponding small caps glyph. If you set the `symbol` keyword to `true` it will also create small caps variants of digits and symbols. The outlines of the new glyph will be based on the outlines of the upper-case variant of the letter. These will then be scaled so that a glyph which was `capheight` high will now be `scheight` high, and so that stems which were `ucstem` wide will be `lcstem` wide. Normally the ratio of stem heights is the same as the ratio of stem widths, but you may change that with `stem_height_factor`. When it creates a new glyph it will name that glyph by appending ".sc" to the original lower case letter name (so "a" would become "a.sc") you may change the extension used with `letter_extension`. Similary symbols and digits will use the extension "taboldstyle", but you may change that with `symbol_extension`. When it creates a glyph it also creates two lookups one bound to the feature "c2sc" and the other to "smcp". A mapping from the lower case letter to the small caps letter will be provided under "smcp", while a mapping from the upper case to the small caps under "c2sc". Symbols will have both lookup maps attached to the original glyph.
`alterKerningClass` | `(subtable-name, first-classes, second-classes, offsets)` | Changes the kerning class in the named subtable. The classes arguments are tuples of tuples of glyph names (each sub-tuble of glyph names is a kerning class). The offsets argument is a tuple of kerning offsets. There must be as many entries as `len(first-class)*len(second-class)`. The optional after argument is used to specify the order of the subtable within the lookup.
`autoKern` | `(subtable-name, separation [,minKern=, onlyCloser=, touch=])` or `(subtable-name, separation, glyph-list1, glyph-list2 [,minKern=, onlyCloser=, touch=])` | The named subtable must be a kerning pair subtable that already exists. This command will automatically generate kerning pairs for the named subtable. If no glyph lists are specified it will look at all pairs of the glyphs in the selection; if glyph lists are specified then it will look at all pairs that can be made with one glyph from the first list and the second from the second list. It will attempt to guess a good kerning value between the two glyphs -- a value which will make the optical separation between the two appear to be `separation` em-units. If `minkern` is specified then and the (absolute value of the) kerning correction is less than this number then no kerning pair will be generated. If `onlyCloser` is set true then only negative kerning offsets will be generated (only thing which move two glyphs closer together). If touch is set to 1 then the kerning offset will not be based on optical distance but on the closest approach between two the two glyphs.
`appendSFNTName` | `(language,strid,string)` | Adds a new (or replaces an old) string in the sfnt 'name' table. Language may be either the english name of the language/locale as a string, or the number representing that language in MicroSoft's specification. Strid may be one of the (english) string names (Copyright, Family, SubFamily, etc.) or the numeric value of that item. The string itself is in UTF-8.
`buildOrReplaceAALTFeatures` | `()` | Removes any existing AALT features (and any lookups solely controled by such features) and creates new ones containing all possible single and alternate substutions available for each glyph.
`cidConvertByCMap` | `(cmap-filename)` | Converts a normal font into a CID-keyed font with one subfont using the CMAP to determine the mapping.
`cidConvertTo` | `(registry,ordering,supplement)` | Converts a normal font into a CID-keyed font with one subfont.
`cidFlatten` | `()` | Converts a CID font into a normal font (glyphs will be in CID order).
`cidFlattenByCMap` | `(cmap-filename)` | Converts a CID font into a normal font using the encoding specified in the CMAP file.
`cidInsertBlankSubFont` | `()` | Adds a new (blank) sub-font into a cid-keyed font and changes the current sub-font to be it.
`cidRemoveSubFont` | `()` | Removes the current subfont from a cid-keyed font.
`close` | `()` | Frees memory for the current font. Warning: Any python pointers to it will become invalid.
`compareFonts` | `(other-font,filename, flags-tuple)` | This will compare the current font with the font in `other-font` (which must already have been opened). It will write the results to the `filename`, you may use "-" to send the output to stdout. The `flags` argument is a tuple of strings and controls what will be compared.
flags
outlines | compare outlines
outlines-exactly | compare outlines exactly (otherwise allow slight errors and the unlinking of references)
warn-outlines-mismatch | warn if the outlines don't exactly match (but are pretty close)
hints | compare hints
warn-refs-unlink | warn if references need to be unlinked before a match is found
strikes | compare bitmap strikes
fontnames | compare font names
gpos | compare glyph positioning
gsub | compare glyph substitutions
add-outlines | for any glyphs whose outlines differ, add the outlines of the glyph in the second font to the background of the glyph in the first
create-glyphs | if a glyph exists in the second font but not the first, create that glyph in the first and add the outlines from the second into the backgroun layer
`createChar` | `(uni[,name])` | Create (and return) a character at the specified unicode codepoint in this font and optionally name it. If you wish to create an glyph with no unicode codepoint set the first argument to -1 and specify a name. If there is already a character there, return it.
`createInterpolatedGlyph` | `(glyph1,glyph2,amount)` | Create (and return) a glyph with the same unicode code point as glyph1. The glyph may not already exist. The contents of the glyph will be formed by interpolating between glyph1 and glyph2. If amount==0 the result will look like glyph1, or 1 then like glyph2.
`createMappedChar` | `(enc) (name)` | Create (and return) a character at the specified encoding in this font. If there is already a character there, return it
`find` | `(contour[,error-bound,search_flags])` | Searches the font for all glyphs containing the contour (or layer) and returns an iterator which returns those glyphs. error-bound: defaults to 0.01. search_flags: tuple of the strings: reverse, flips, rotate, scale. When found, the glyph.temporary is set to a dict of:
    	  {
    	   "findMatchedRefs": matched_refs_bit_map,
    	   "findMatchedContours": matched_contours_bit_map,
    	   "findMatchedContoursStart": matched_contours_start_bit_map,
    	  }
`findEncodingSlot` | `(uni) (name)` | Tests whether a glyph with this codepoint or name is in the font's encoding and returns the encoding slot. If the glyph is not present it returns -1. (If a glyph with that name/unicode is in the font, but is not in the encoding, then an value beyond the end of the encoding will be returned).
`glyphs` | `([type])` | Returns an iterator which will return the glyphs in the font. By default they will be returned in "GID" order, but if type is specified as "encoding" they will be returned in encoding order. If returned in encoding order it is possible that a glyph will be returned more than once if there are multiple encoding slots which reference it.
`generate` | `(filename [,bitmap_type=, flags=, bitmap_resolution=, subfont_directory=, namelist=, layer=])` | Generates a font. The type is determined by the font's extension. The bitmap type (if specified) is also an extension. If layer is specified, then the splines and references in that layer will be used instead of the foreground layer. Flags is a tuple containing some of afm output an afm file pfm output a pfm file tfm output a tfm file ofm output a ofm file composites-in-afm Store composite info in the afm file glyph-map-file Output a glyph map file giving the mapping between output gid and glyphnames short-post Do not include glyphnames in a ttf/otf file apple output apple advanced typography tables opentype output opentype tables old-kern output an old style 'kern' with opentype tables dummy-dsig output an empty DSIG table so MS will mark a font with .ttf extension as an OpenType font. TeX-table Include a 'TeX ' table in an ttf/otf file round Round PS coordinates to integers no-hints Do not include PS hints no-flex Do not include PS flex hints omit-instructions Do not include TrueType instructions PfEd-comments Include font and glyph comments in the 'PfEd' table PfEd-colors Include glyph colors in the 'PfEd' table PfEd-lookups Include lookup names in the 'PfEd' table PfEd-guidelines Include guideline locations in the 'PfEd' table PfEd-background Include background (and spiro) layers in the 'PfEd' table symbol Generate an sfnt with a Symbol cmap entry rather than a Unicode entry. See also save().
`generateTtc` | `(filename,others, [flags=, ttcflags=, namelist=, layer=])` | Generates a truetype collection file containing the current font and all others listed -- the `others` argument may be `None`, a font, or a tuple (or list) of fonts. Flags are as above, Ttcflags is a tuple consisting of the following merge Try and share tables and glyphs among the various fonts. cff Use the CFF glyph format rather than the TrueType format (the OpenType documentation says that this does not work, but both the Mac and unix/linux accept it).
`generateFeatureFile` | `(filename[,lookup-name])` | Generates an adobe feature file for the current font. If a lookup-name is specified then only data for that lookup will be generated.
`genericGlyphChange` | `(stemType=<str>, thickThreshold=<double>, stemScale=<double>, stemAdd=<double>, stemHeightScale=<double>, stemHeightAdd=<double>, stemWidthScale=<double>, stemWidthAdd=<double>, thinStemScale=<double>, thinStemAdd=<double>, thickStemScale=<double>, thickStemAdd=<double>, processDiagonalStems=<boolean>, hCounterType=<str>, hCounterScale=<double>, hCounterAdd=<double>, lsbScale=<double>, lsbAdd=<double>, rsbScale=<double>, rsbAdd=<double>, vCounterType=<str>, vCounterScale=<double>, vCounterAdd=<double>, vScale=<double>, vMap=<tuple of tuples>)` | This function uses keyword parameters. Which ones are required depends on the three type arguments (`stemType, hCounterType, vCounterType`). If `stemType` is omitted, or is the string "uniform", then the `stemScale` parameter must be specified (and `stemAdd` may be). `stemScale` specifies a scaling factor by which all stems (horizontal and vertical, thick and thin) will be scaled. A value of 1.0 means no change. While `stemAdd` specifies the number of em-units to add to the width of each stem. If `stemType` is the string "horizontalVertical", then values must be specified for `stemHeightScale` and `stemWidthScale` (and may be for `stemHeightAdd, stemWidthAdd`). The first of these specifies scaling for the height of horizontal stems, and the second scaling for the width of vertical stems. If `stemType` is the string "thickThin", then values must be specified for `thinStemScale`, `thickStemScale` and `thickThreshold` (and may be for `thinStemAdd, thickStemAdd`). The first of these specifies scaling for the width/height of thin stems, and the second scaling for the width/height of thick stems. While the `thickThreshold` argument specifies the size (in em-units) at which a stem is classified as "thick". If `hCounterType` is omitted, or is the string "uniform", then horizontal counters, and the left and right side bearings will all be scaled using the same rules, and `hCounterScale` must be specified to provide the scaling factor (while `hCounterAdd` may be specified). If `hCounterType` is the string "nonUniform", then horizontal counters, and the left and right side bearings may all be scaled using different rules, and `hCounterScale, lsbScale` and `rsbScale` must be specified to provide the scaling factors (while `hCounterAdd, lsbAdd,` and `rsbAdd` may be specified). If `hCounterType` is the string "center", then the left and right side-bearings will be set so the new glyph is centered within the original glyph's width. (Probably more useful for CJK fonts than LGC fonts). If `hCounterType` is the string "retainScale", then the left and right side-bearings will be set so the new glyph is within within the original glyph's width, and the side-bearings remain in the same proportion to each other as before. If `vCounterType` is omitted, or is the string "mapped", then certain zones on the glyph may be placed at new (or the same) locations -- similar to BlueValues. So you can specify a zone for the baseline, one for the x-height and another for the top of capitals and ascenders (and perhaps a fourth for descenders). Each such zone is specified by the `vMap` argument which is a tuple of 3-tuples, each 3-tuple specifying a zone with: Original location, original width, and final location. No default value is provided for this argument you must figure out all the values yourself. If `vCounterType` is the string "scaled", then vertical counters, and the top and bottom side bearings will all be scaled using the same rules, and `vCounterScale` must be specified to provide the scaling factor (while `vCounterAdd` may be specified). This is probably most useful for CJK fonts.
`getKerningClass` | `(subtable-name)` | Returns a tuple whose entries are: (first-classes, second-classes, offsets). The classes are themselves tuples of tuples of glyph names. The offsets will be a tuple of numeric kerning offsets.
`getLookupInfo` | `(lookup-name)` | Returns a tuple whose entries are: (lookup-type, lookup-flags, feature-script-lang-tuple) The lookup type is a string as described in addLookup, and the feature-script-lang tuple is also described there.
`getLookupSubtables` | `(lookup-name)` | Returns a tuple of all subtable names in that lookup.
`getLookupSubtableAnchorClasses` | `(subtable-name)` | Returns a tuple of all anchor class names in that subtable.
`getLookupOfSubtable` | `(subtable-name)` | Returns the name of the lookup containing this subtable.
`getSubtableOfAnchor` | `(anchor-class-name)` | Returns the name of the subtable containing this anchor class.
`importBitmaps` | `(bitmap-font-file [,to-background])` | Load any bitmap strikes out of the bitmap-font-file into the current font
`importLookups` | `(another-font,lookup-names [,before-name])` | The first argument must be a FontForge Font object, the second a string or a tuple of strings, and the third, another string. It will search the other font for the named lookup(s) and import it into the current font. (Contextual lookups which invoke other lookups will have any nested lookups imported as well). Lookups will be imported in the order listed. If a before-name is specified, then it is looked up in the current font and all lookups will be added before it, if not specified lookups will appear at the end of the list.
`interpolateFonts` | `(fraction,filename)` | Interpolates a font between the current font and the font contained in filename.
`isKerningClass` | `(subtable-name)` | Returns whether the named subtable contains a kerning class.
`isVerticalKerning` | `(subtable-name)` | Returns whether the named subtable contains a vertical kerning data
`italicize` | `(italic_angle=, ia= lc_condense=, lc= uc_condense=, uc= symbol_condense=, symbol= deserif_flat=, deserif_slant=, deserif_pen=, baseline_serifs=, xheight_serifs=, ascent_serifs=, descent_serifs=, diagonal_serifs=, a=, f=, u0438=, u043f=, u0442=, u0444=, u0448=, u0452=, u045f=)` | This function uses keyword parameters. None is required, if omitted a default value will be used. Some keywords have abbreviations ("ia" for "italic_angle") you may use either. This function will attempt to italicize each selected glyph. For a detailed explanation of what this entails please see the information on the Italic dialog. The `*_condense` keywords should be 4 element tuples of floating point numbers; these numbers correspond to: Left side bearing condensation, stem condensation, counter condensation and right side bearing condensation. These numbers should be small numbers around 1 (scale factors, not percentages). Set at most one of the `deserif_*` keywords. Setting `a` to `true` will turn on the transformation that applies to the "a" glyph. Setting `u0438` will control the transformation that applies to the glyph at unicode codepoint U+0438. The `f` keyword is slightly more complex. Setting it to 0 turns off all transformations of glyphs like "f", setting it to 1 will give "f" a tail which looks like a rotated version of its head, and setting it to 2 will simply extend the main stem of "f" below the baseline.
`lookupSetFeatureList` | `(lookup-name, feature-script-lang-tuple)` | Sets the feature list of indicated lookup. The feature-script-lang tuple is described at addLookup.
`lookupSetFlags` | `(lookup-name,flags)` | Sets the lookup flags for the named lookup.
`lookupSetStoreLigatureInAfm` | `(lookup-name,boolean)` | Sets whether this ligature lookup contains data to store in the afm.
`mergeFonts` | `(filename[, preserveCrossFontKerning])` | Merges the font in the file into the current font.
`mergeFeature` | `(filename)` | Merge feature and lookup information from an adobe feature file, or metrics information from the (afm,tfm,etc) file into the current font.
`mergeKern` | `(filename)` | Deprecated name for mergeFeature above
`mergeLookups` | `(lookup-name1,lookup-name2)` | The lookups must be of the same type. All subtables from lookup-name2 will be moved to lookup-name1, the features list of lookup-name2 will be merged with that of lookup-name1, and lookup-name2 will be removed.
`mergeLookupSubtables` | `(subtable-name1, subtable-name2)` | The subtables must be in the same lookup. Not all lookup types allow their subtables to be merged (contextual subtables may not be merged, kerning classes may not be (kerning pairs may be)). Any information bound to subtable2 will be bound to subtable1 and subtable2 will be removed.
`printSample` | `(type,pointsize, sample,output-file)` | Type is a string which must be one of fontdisplay Display all glyphs in the font in encoding order chars Display the selected glyphs scaled to fill a page Ignores the pointsize argument. waterfall Displays the selected glyphs at many pointsizes. The pointsize argument should be a tuple of pointsizes here. fontsample The third argument should contain a string which will be layed out and displayed as well as FontForge can. fontsampleinfile The third argument should contain the name of a file which contains text to be layed out and displayed. If output is to a file (see printSetup) then the last argument specifies a file name in which to store output.
`randomText` | `(script[,lang])` | Returns a random text sample using the letter frequencies of the specified script (and optionally language). Both script and language should be expressed as strings containing OpenType Script and Language tags. "dflt" is a reasonable language tag. If the language is not specified, one will be chosen at random. If ff has no frequency information for the script/language specified it will use the letters in the script with equal frequencies.
`regenBitmaps` | `(tuple-of-sizes)` | A tuple with an entry for each bitmap strike to be regenerated (rerasterized). Each strike is identified by pixelsize (if the strike is a grey scale font it will be indicated by `(bitmap-depth<<16)|pixelsize`.
`removeAnchorClass` | `(anchor-class-name)` | Removes the named AnchorClass (and all associated points) from the font.
`removeLookup` | `(lookup-name[,remove_acs])` | Remove the lookup (and any subtables within it). remove_acs (0 or 1), specifies whether to remove associated anchor classes and points.
`removeLookupSubtable` | `(subtable-name[,remove_acs])` | Remove the subtable (and all data associated with it). remove_acs (0 or 1), specifies whether to remove associated anchor classes and points
`removeGlyph` | `(uni[,name]) (name) (glyph)` | You may either pass in a FontForge glyph object (from this font) or identify a glyph in the font by unicode code point or name. In any case the glyph will be removed from the font. If you use (uni,name) to specify a name, set uni to -1. WARNING: This frees fontforge's storage to this glyph. If you have any python pointers to that storage they will be looking at garbage. This does not go through the usual python reference mechanism.
`replaceAll` | `(srch,rpl[,error-bound])` | Searches the font for all occurences of the srch contour (or layer) and replaces them with the replace contour (or layer).
`revert` | `()` | Reloads the font from the disk. Caveat: if you have any pointers to glyphs which live in the font those pointers will no longer be valid, and using them will cause crashes. This is very un-python-like.
`revertFromBackup` | `()` | Reloads the font from the backup file on the disk. Caveat: if you have any pointers to glyphs which live in the font those pointers will no longer be valid, and using them will cause crashes. This is very un-python-like.
`save` | `([filename])` | Saves the font to an sfd file. See also generate()
`saveNamelist` | `(filename)` | Saves the font's namelist to a file.
`getTableData` | `(table-name)` | Gets binary data from any saved table. FF will save 'fpgm', 'prep', 'cvt ' and 'maxp'. FF may also save tables which you explicitly request. Do not expect to get binary data for tables like 'GPOS' or 'glyf' which FF will generate when it creates a font... that information is not currently available. Returns a binary string.
`setTableData` | `(table-name,sequence)` | Sets binary data of any saved table. FF will save 'fpgm', 'prep', 'cvt ' and 'maxp'. FF may also save tables which you explicitly request. Do not expect to set binary data for tables like 'GPOS' or 'glyf' which FF will generate when it creates a font... that information is not currently available. If sequence is None, then the named table will be removed from the font.
`validate` | `([force])` | Validates the font and returns a bit mask of all errors from all glyphs (as defined in the `validation_state` of a glyph -- except bit 0x1 is clear). If the font passed the validation then the return value will be 0 (not 0x1). Otherwise the return value will be the set of errors found. Note: The set of errors is slightly different for TrueType and PostScript output. The returned mask contains the list of potential errors. You must figure out which apply to you. Normally each glyph will cache its validation_state and it will not be recalculated. If you pass a non-zero argument to the routine then it will force recalculation of each glyph -- this can be slow.s
Selection based interface See the selection type for how to alter the selection
`addExtrema` | `()` | Extrema should be marked by on-curve points. If a curve in any selected glyph lacks a point at a significant extremum this command will add one.
`addSmallCaps` | `()` | For all selected upper or lower case letters in the latin, greek and cyrillic scripts this will try to create a small caps version of that glyph in a new glyph slot. So if you select "A" (or "a") then a glyph "a.sc" will be created (if "a.sc" already exists, it will be reused, and its current contents cleared). The contents of "a.sc" will be based on the upper case variant of this glyph (and that variant must be present for the command to work). FontForge will also create two lookups (unless appropriate ones already exist) one, bound to the feature 'c2sc' will map upper case letters to small caps, the other, bound to feature 'smcp' will map lower case letters to small caps.
`autoHint` | `()` | Generates PostScript hints for all selected glyphs.
`autoInstr` | `()` | Generates TrueType instructions for all selected glyphs.
`autoWidth` | `(separation [,minBearing=,maxBearing=])` | Guesses at reasonable horizontal advance widths for the selected glyphs
`autoTrace` | `()` | Auto traces any background images in all selected glyphs
`build` | `()` | If any of the selected characters is a composite character, then this command will clear it and insert references to its components (this command can create new glyphs).
`canonicalContours` | `()` | Orders the contours in the selected glyphs by the x coordinate of their leftmost point. (This can reduce the size of the charstring needed to describe the glyph(s).
`canonicalStart` | `()` | Sets the start point of all the contours of the selected glyphs to be the leftmost point on the contour. (If there are several points with that value then use the one which is closest to the baseline). This can reduce the size of the charstring needed to describe the glyph(s). By regularizing things it can also make more things available to be put in subroutines.
`changeWeight` | `(stroke_width[,type, serif_height,serif_fuzz, counter_type,custom_zones])` | See the Element->Style->Change Width command for a more complete description of these arguments. Stroke_width is the amount by which all stems are expanded. Type is one of "LCG", "CJK", "auto", "custom". Serif_height tells ff not to expand serifs which are that much off the baseline, while serif_fuzz specifies the amount of fuzziness allowed in the match. If you don't want special serif behavior set this to 0. Counter_type is one of "squish", "retain", "auto". Custom_zones is only meaningful if the type argument were "custom". It may be either a number, which specifies the "top hint" value (bottom hint is assumed to be 0, others are between), or a tuple of 4 numbers (top hint, top zone, bottom zone, bottom hint).
`condenseExtend` | `(c_factor,c_add [,sb_factor,sb_add, correct])` | Condenses or extends the size of the counters and side-bearings of the selected glyphs. The first two arguments provide information on shrinking/growing the counters, the second two the sidebearings. If the last two are omitted they default to the same values as the first two. A counter's width will become: `new_width = c_factor * old_width + c_add` If present the `correct` argument allows you to specify whether you want to correct for the italic angle before condensing the glyph. (it defaults to True)
`clear` | `()` | Clears the contents of all selected glyphs
`cluster` | `([within,max])` | Moves clustered coordinates to a standard central value in all selected glyphs. See also round.
`copy` | `()` | Copies all selected glyphs into (fontforge's internal) clipboard.
`copyReference` | `()` | Copies all selected glyphs (as references) into (fontforge's internal) clipboard.
`correctDirection` | `()` | Orients all contours so that external ones are clockwise and internal counter-clockwise in all selected glyphs.
`correctReferences` | `()` | Checks a font for glyphs with mixed contours and references (or references with transformation matrices which cannot be represented truetype (ie. scaling by 2 or more)). If a mixed case is discovered fontforge will take the contours out of the glyph, put them in a new glyph, and make a reference to the new glyph.
`cut` | `()` | Copies all selected glyphs into (fontforge's internal) clipboard. And then clears them.
`paste` | `()` | Pastes the contents of (fontforge's internal) clipboard into the selected glyphs -- and removes what was there before.
`intersect` | `()` | Leaves only areas in the intersection of contours in all selected glyphs. See also removeOverlap.
`pasteInto` | `()` | Pastes the contents of (fontforge's internal) clipboard into the selected glyphs -- and retains what was there before.
`removeOverlap` | `()` | Removes overlapping areas in all selected glyphs. See also intersect.
`replaceWithReference` | `([fudge])` | Finds any glyph which contains an inline copy of one of the selected glyphs, and converts that copy into a reference to the appropriate glyph. Selection is changed to the set of glyphs which the command alters. If specified the fudge argument specifies the error allowed for coordinate differences.
`round` | `([factor])` | Rounds the x and y coordinates of each point in all selected glyphs. If factor is specified then new-coord = round(factor*old-coord)/factor. See also cluster.
`simplify` | `([error-bound,flags,tan_bounds, linefixup,linelenmax])` | Tries to remove excess points in all selected glyphs if doing so will not perturb the curve by more than `error-bound`. Flags is a tuple of the following strings ignoreslopes Allow slopes to change ignoreextrema Allow removal of extrema smoothcurves Allow curve smoothing choosehv Snap to horizontal or vertical forcelines flatten bumps on lines nearlyhvlines Make nearly horizontal/vertical lines be so mergelines Merge adjacent lines into one setstarttoextremum Rotate the point list so that the start point is on an extremum removesingletonpoints If the contour contains just one point then remove it
`stroke` | `("circular",width[, linecap,linejoin,flags]) ("eliptical",width, minor-width,angle [,linecap,linejoin,flags]) ("caligraphic",width, height,angle[,flags]) ("polygonal",contour[,flags])` | Strokes the contours of all selected glyphs using one of the indicated pens. Line cap may be one of butt round square line join may be miter round bevel flags is a tuple containing some of the following strings removeinternal removeexternal cleanup If a polygonal pen is specified the contour must be a closed convex polygon (no curved edges) with fewer than 100 vertices.
`transform` | `(matrix)` | Transforms all selected glyphs by the matrix.
`nltransform` | `(xexpr,yexpr)` | xexpr and yexpr are strings specifying non-linear transformations that will be applied to all points in the selected glyphs of the font (with xexpr being applied to x values, and yexpr to y values, of course). The syntax for the expressions is explained in the non-linear transform dialog.
`unlinkReferences` | `()` | Unlinks all references in all selected glyphs and replaces them with splines.

### Stupid example

    import fontforge                                 #Load the module
    amb=fontforge.open("Ambrosia.sfd")               #Open a font
    amb.selection.select(("ranges",None),"A","Z")    #select A-Z
    amb.copy()                                       #Copy those glyphs into the clipboard

    n=fontforge.font()                               #Create a new font
    n.selection.select(("ranges",None),"A","Z")      #select A-Z of it
    n.paste()                                        #paste the glyphs above in
    print n["A"].foreground                          #test to see that something
                                                     #  actually got pasted
    n.fontname="NewFont"                             #Give the new font a name
    n.save("NewFont.sfd")                            #and save it.

## FontForge as a python extension

When Fontforge is installed, it also installs a Python module, which can be accessed from Python using:

>     >>> import fontforge