KAlarm Installation
===================

Requirements
============

KAlarm requires kdelibs 3.3 or higher to be installed. In order to build it from
source, the following development packages also need to be installed:

   - Qt development package
   - kdelibs development package
   - fam-devel package (only needed on some systems, e.g. RedHat 7.2. Install
                        if you get a build error about libfam.la missing.)

The following optional packages enhance KAlarm if they are installed:

   - kmix (from kdemultimedia package): if installed, it allows KAlarm to set
          the absolute sound volume when playing audio files.
   - kttsd (from kdeaccessibility package): if installed and configured
           (together with compatible speech synthesiser packages), it allows
	   KAlarm to speak alarm messages when alarms are displayed.


Quick Guide
===========

KAlarm is built and installed in the standard way.


   cd kalarm-2.1.0
   ./configure
   make
   [ Log in as root ]
   cd /path/kalarm-2.1.0
   make install

Options for ./configure which may be of particular use are:

   --enable-doc-language=[LANGS]

          A special KAlarm option to allow you to select which languages
          documentation is to be installed for by specifying a language code,
          or a list of language codes, as a parameter. By default, documentation
          in all available languages is installed. A list of documentation
          languages included in this package, together with their codes, is in
          the DOC-LANGUAGES file.
          N.B. This has no effect on which user interface translations are
          installed.

          Example - to install only British English documentation:
              ./configure --enable-doc-language=en_GB

          Example - to install only French, Spanish and Swedish documentation:
              ./configure --enable-doc-language="fr es sv"

   --prefix=[KDE-dir]

          If you have more than one version of KDE installed, or sometimes if
          KDE is not in /opt/kde, you may need this to specify where to
          install the application.

          Example - to install into /opt/kde2:
            ./configure --prefix=/opt/kde2

          WARNING: If you install into a different directory than the KDE
          installation, you must prefix your installation directory path to the
          run-time environment variable KDEDIRS, and restart KDE. Otherwise
          KAlarm will not run correctly. If you don't understand what this
          means, you should install into the standard KDE directory.

   --disable-debug

          To prevent any debug messages being output to the console which you
          run KAlarm from.


Setting up on non-KDE desktops
==============================

Although KAlarm is a KDE application and requires the KDE libraries to be
installed on your system, you can still use it while running other desktops or
window managers.

In order to have alarms monitored and displayed automatically from one login
session to the next, KAlarm must be run automatically when you graphically log
in or otherwise start X. If you are running the KDE desktop, the KAlarm
installation process sets this up for you.

- GNOME 2
  =======
  Run Desktop Preferences -> Advanced -> Sessions. In the Sessions dialog,
  select the Startup Programs tab and click Add. Enter
  'kalarmautostart kalarm --tray' as the Startup Command. This will run KAlarm
  in the system tray every time you start up.

- Other Window Managers
  =====================
  If you want to use KAlarm with a non-KDE window manager:

  1) If your desktop environment/window manager performs session restoration,
     ensure that the kalarm is included in the session restoration, and that
     after login or restarting X kalarm is running with a '-session' command
     line option, e.g.

         kalarm -session 117f000002000100176495700000008340018

     You can use the 'ps' command to check this.

  2) If you cannot use session restoration to start KAlarm correctly, you
     must configure the following command to be run whenever you graphically log
     in or start X:

         kalarm --tray

     If you have successfully configured session restoration, you should also
     configure the following command to be run whenever you graphically log in
     or start X:

         kalarmautostart kalarm --tray

     If your desktop environment or window manager has a facility to configure
     programs to be run at login, you can use that facility. Otherwise, you need
     to add the command to an appropriate script which is run after X is started.

  If you can send me details on how to set up KAlarm for any particular window
  manager, I will include these in the next version of KAlarm.


Accessing language translations
===============================

KAlarm will automatically use whatever language you have configured your KDE
desktop to use (provided of course that the KAlarm package includes that
language translation!). To set up KDE to use a particular language, first
install the relevant 'i18n' language package which is part of the KDE release,
and then use the KDE Control Centre to select your country and language.



Basic Installation
==================

   These are generic installation instructions.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

   The file `configure.in' is used to create `configure' by a program
called `autoconf'.  You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes a while.  While running, it prints some
     messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Type `make install' to install the programs and any data files and
     documentation.

  4. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.

Compilers and Options
=====================

   Some systems require unusual options for compilation or linking that
the `configure' script does not know about.  You can give `configure'
initial values for variables by setting them in the environment.  Using
a Bourne-compatible shell, you can do that on the command line like
this:
     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

Or on systems that have the `env' program, you can do it like this:
     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

Compiling For Multiple Architectures
====================================

   You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory.  After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.

Installation Names
==================

   By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc.  You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

   Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  Specific
`--enable-' and `--with-' options that the package recognises are
described above in `Quick Guide'.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

   There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on.  Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
     CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

   If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.

Sharing Defaults
================

   If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Operation Controls
==================

   `configure' recognises the following options to control how it
operates.

`--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.

`--help'
     Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--version'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`configure' also accepts some other, not widely useful, options.
