checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating bigreqsproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/bigreqsproto-1.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-bigreqsproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-bigreqsproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 bigreqstr.h /tmp/x11-build/package-bigreqsproto/usr/include/X11/extensions/bigreqstr.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-bigreqsproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-bigreqsproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 bigreqsproto.pc /tmp/x11-build/package-bigreqsproto/usr/lib/pkgconfig/bigreqsproto.pc make[1]: Leaving directory `/tmp/x11-build/bigreqsproto-1.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file bigreqsproto-1.0.2-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/bigreqstr.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/bigreqsproto.pc install/ install/slack-desc tar-1.13: bigreqsproto-1.0.2-noarch-1.tar is the archive; not dumped Gzipping bigreqsproto-1.0.2-noarch-1.tar... Renaming bigreqsproto-1.0.2-noarch-1.tar.gz to bigreqsproto-1.0.2-noarch-1.tgz... Moving bigreqsproto-1.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no configure: creating ./config.status config.status: creating Makefile config.status: creating compositeproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/compositeproto-0.4' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-compositeproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'composite.h' '/tmp/x11-build/package-compositeproto/usr/include/X11/extensions/composite.h' /usr/bin/ginstall -c -m 644 'compositeproto.h' '/tmp/x11-build/package-compositeproto/usr/include/X11/extensions/compositeproto.h' test -z "/usr/share/doc/compositeproto" || mkdir -p -- "/tmp/x11-build/package-compositeproto/usr/share/doc/compositeproto" /usr/bin/ginstall -c -m 644 'compositeproto.txt' '/tmp/x11-build/package-compositeproto/usr/share/doc/compositeproto/compositeproto.txt' test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-compositeproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'compositeproto.pc' '/tmp/x11-build/package-compositeproto/usr/lib/pkgconfig/compositeproto.pc' make[1]: Leaving directory `/tmp/x11-build/compositeproto-0.4' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file compositeproto-0.4-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/composite.h usr/include/X11/extensions/compositeproto.h usr/share/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/compositeproto.pc usr/doc/ usr/doc/compositeproto/ usr/doc/compositeproto/compositeproto.txt install/ install/slack-desc tar-1.13: compositeproto-0.4-noarch-1.tar is the archive; not dumped Gzipping compositeproto-0.4-noarch-1.tar... Renaming compositeproto-0.4-noarch-1.tar.gz to compositeproto-0.4-noarch-1.tgz... Moving compositeproto-0.4-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no configure: creating ./config.status config.status: creating Makefile config.status: creating damageproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/damageproto-1.1.0' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-damageproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'damageproto.h' '/tmp/x11-build/package-damageproto/usr/include/X11/extensions/damageproto.h' /usr/bin/ginstall -c -m 644 'damagewire.h' '/tmp/x11-build/package-damageproto/usr/include/X11/extensions/damagewire.h' test -z "/usr/share/doc/damageproto" || mkdir -p -- "/tmp/x11-build/package-damageproto/usr/share/doc/damageproto" /usr/bin/ginstall -c -m 644 'damageproto.txt' '/tmp/x11-build/package-damageproto/usr/share/doc/damageproto/damageproto.txt' test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-damageproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'damageproto.pc' '/tmp/x11-build/package-damageproto/usr/lib/pkgconfig/damageproto.pc' make[1]: Leaving directory `/tmp/x11-build/damageproto-1.1.0' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file damageproto-1.1.0-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/damageproto.h usr/include/X11/extensions/damagewire.h usr/share/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/damageproto.pc usr/doc/ usr/doc/damageproto/ usr/doc/damageproto/damageproto.txt install/ install/slack-desc tar-1.13: damageproto-1.1.0-noarch-1.tar is the archive; not dumped Gzipping damageproto-1.1.0-noarch-1.tar... Renaming damageproto-1.1.0-noarch-1.tar.gz to damageproto-1.1.0-noarch-1.tgz... Moving damageproto-1.1.0-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating dmxproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/dmxproto-2.2.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-dmxproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-dmxproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 dmxext.h /tmp/x11-build/package-dmxproto/usr/include/X11/extensions/dmxext.h /usr/bin/ginstall -c -m 644 dmxproto.h /tmp/x11-build/package-dmxproto/usr/include/X11/extensions/dmxproto.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-dmxproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-dmxproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 dmxproto.pc /tmp/x11-build/package-dmxproto/usr/lib/pkgconfig/dmxproto.pc make[1]: Leaving directory `/tmp/x11-build/dmxproto-2.2.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file dmxproto-2.2.2-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/dmxext.h usr/include/X11/extensions/dmxproto.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/dmxproto.pc install/ install/slack-desc tar-1.13: dmxproto-2.2.2-noarch-1.tar is the archive; not dumped Gzipping dmxproto-2.2.2-noarch-1.tar... Renaming dmxproto-2.2.2-noarch-1.tar.gz to dmxproto-2.2.2-noarch-1.tgz... Moving dmxproto-2.2.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating evieproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/evieext-1.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-evieext/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-evieext/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 Xeviestr.h /tmp/x11-build/package-evieext/usr/include/X11/extensions/Xeviestr.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-evieext/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-evieext/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 evieproto.pc /tmp/x11-build/package-evieext/usr/lib/pkgconfig/evieproto.pc make[1]: Leaving directory `/tmp/x11-build/evieext-1.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file evieext-1.0.2-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/Xeviestr.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/evieproto.pc install/ install/slack-desc tar-1.13: evieext-1.0.2-noarch-1.tar is the archive; not dumped Gzipping evieext-1.0.2-noarch-1.tar... Renaming evieext-1.0.2-noarch-1.tar.gz to evieext-1.0.2-noarch-1.tgz... Moving evieext-1.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating fixesproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/fixesproto-4.0' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-fixesproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'xfixesproto.h' '/tmp/x11-build/package-fixesproto/usr/include/X11/extensions/xfixesproto.h' /usr/bin/ginstall -c -m 644 'xfixeswire.h' '/tmp/x11-build/package-fixesproto/usr/include/X11/extensions/xfixeswire.h' test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-fixesproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'fixesproto.pc' '/tmp/x11-build/package-fixesproto/usr/lib/pkgconfig/fixesproto.pc' make[1]: Leaving directory `/tmp/x11-build/fixesproto-4.0' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file fixesproto-4.0-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xfixesproto.h usr/include/X11/extensions/xfixeswire.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/fixesproto.pc install/ install/slack-desc tar-1.13: fixesproto-4.0-noarch-1.tar is the archive; not dumped Gzipping fixesproto-4.0-noarch-1.tar... Renaming fixesproto-4.0-noarch-1.tar.gz to fixesproto-4.0-noarch-1.tgz... Moving fixesproto-4.0-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating fontcacheproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/fontcacheproto-0.1.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-fontcacheproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-fontcacheproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 fontcache.h /tmp/x11-build/package-fontcacheproto/usr/include/X11/extensions/fontcache.h /usr/bin/ginstall -c -m 644 fontcacheP.h /tmp/x11-build/package-fontcacheproto/usr/include/X11/extensions/fontcacheP.h /usr/bin/ginstall -c -m 644 fontcachstr.h /tmp/x11-build/package-fontcacheproto/usr/include/X11/extensions/fontcachstr.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-fontcacheproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-fontcacheproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 fontcacheproto.pc /tmp/x11-build/package-fontcacheproto/usr/lib/pkgconfig/fontcacheproto.pc make[1]: Leaving directory `/tmp/x11-build/fontcacheproto-0.1.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file fontcacheproto-0.1.2-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/fontcache.h usr/include/X11/extensions/fontcacheP.h usr/include/X11/extensions/fontcachstr.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/fontcacheproto.pc install/ install/slack-desc tar-1.13: fontcacheproto-0.1.2-noarch-1.tar is the archive; not dumped Gzipping fontcacheproto-0.1.2-noarch-1.tar... Renaming fontcacheproto-0.1.2-noarch-1.tar.gz to fontcacheproto-0.1.2-noarch-1.tgz... Moving fontcacheproto-0.1.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating fontsproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/fontsproto-2.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-fontsproto/usr/include/X11/fonts mkdir -p -- /tmp/x11-build/package-fontsproto/usr/include/X11/fonts /usr/bin/ginstall -c -m 644 font.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/font.h /usr/bin/ginstall -c -m 644 fontproto.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/fontproto.h /usr/bin/ginstall -c -m 644 fontstruct.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/fontstruct.h /usr/bin/ginstall -c -m 644 FS.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/FS.h /usr/bin/ginstall -c -m 644 fsmasks.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/fsmasks.h /usr/bin/ginstall -c -m 644 FSproto.h /tmp/x11-build/package-fontsproto/usr/include/X11/fonts/FSproto.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-fontsproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-fontsproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 fontsproto.pc /tmp/x11-build/package-fontsproto/usr/lib/pkgconfig/fontsproto.pc make[1]: Leaving directory `/tmp/x11-build/fontsproto-2.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file fontsproto-2.0.2-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/fonts/ usr/include/X11/fonts/font.h usr/include/X11/fonts/fontproto.h usr/include/X11/fonts/fontstruct.h usr/include/X11/fonts/FS.h usr/include/X11/fonts/fsmasks.h usr/include/X11/fonts/FSproto.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/fontsproto.pc install/ install/slack-desc tar-1.13: fontsproto-2.0.2-noarch-1.tar is the archive; not dumped Gzipping fontsproto-2.0.2-noarch-1.tar... Renaming fontsproto-2.0.2-noarch-1.tar.gz to fontsproto-2.0.2-noarch-1.tgz... Moving fontsproto-2.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating glproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/glproto-1.4.9' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/GL" || /usr/bin/mkdir -p "/tmp/x11-build/package-glproto/usr/include/GL" /usr/bin/ginstall -c -m 644 'glxint.h' '/tmp/x11-build/package-glproto/usr/include/GL/glxint.h' /usr/bin/ginstall -c -m 644 'glxmd.h' '/tmp/x11-build/package-glproto/usr/include/GL/glxmd.h' /usr/bin/ginstall -c -m 644 'glxproto.h' '/tmp/x11-build/package-glproto/usr/include/GL/glxproto.h' /usr/bin/ginstall -c -m 644 'glxtokens.h' '/tmp/x11-build/package-glproto/usr/include/GL/glxtokens.h' test -z "/usr/include/GL/internal" || /usr/bin/mkdir -p "/tmp/x11-build/package-glproto/usr/include/GL/internal" /usr/bin/ginstall -c -m 644 'glcore.h' '/tmp/x11-build/package-glproto/usr/include/GL/internal/glcore.h' test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-glproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'glproto.pc' '/tmp/x11-build/package-glproto/usr/lib/pkgconfig/glproto.pc' make[1]: Leaving directory `/tmp/x11-build/glproto-1.4.9' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file glproto-1.4.9-noarch-1.tar... ./ usr/ usr/include/ usr/include/GL/ usr/include/GL/glxint.h usr/include/GL/glxmd.h usr/include/GL/glxproto.h usr/include/GL/glxtokens.h usr/include/GL/internal/ usr/include/GL/internal/glcore.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/glproto.pc install/ install/slack-desc tar-1.13: glproto-1.4.9-noarch-1.tar is the archive; not dumped Gzipping glproto-1.4.9-noarch-1.tar... Renaming glproto-1.4.9-noarch-1.tar.gz to glproto-1.4.9-noarch-1.tgz... Moving glproto-1.4.9-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating inputproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/inputproto-1.4.3' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11/extensions" || /usr/bin/mkdir -p "/tmp/x11-build/package-inputproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'XI.h' '/tmp/x11-build/package-inputproto/usr/include/X11/extensions/XI.h' /usr/bin/ginstall -c -m 644 'XInput.h' '/tmp/x11-build/package-inputproto/usr/include/X11/extensions/XInput.h' /usr/bin/ginstall -c -m 644 'XIproto.h' '/tmp/x11-build/package-inputproto/usr/include/X11/extensions/XIproto.h' test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-inputproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'inputproto.pc' '/tmp/x11-build/package-inputproto/usr/lib/pkgconfig/inputproto.pc' make[1]: Leaving directory `/tmp/x11-build/inputproto-1.4.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file inputproto-1.4.3-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/XI.h usr/include/X11/extensions/XInput.h usr/include/X11/extensions/XIproto.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/inputproto.pc install/ install/slack-desc tar-1.13: inputproto-1.4.3-noarch-1.tar is the archive; not dumped Gzipping inputproto-1.4.3-noarch-1.tar... Renaming inputproto-1.4.3-noarch-1.tar.gz to inputproto-1.4.3-noarch-1.tgz... Moving inputproto-1.4.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating kbproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/kbproto-1.0.3' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-kbproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'XKBgeom.h' '/tmp/x11-build/package-kbproto/usr/include/X11/extensions/XKBgeom.h' /usr/bin/ginstall -c -m 644 'XKB.h' '/tmp/x11-build/package-kbproto/usr/include/X11/extensions/XKB.h' /usr/bin/ginstall -c -m 644 'XKBproto.h' '/tmp/x11-build/package-kbproto/usr/include/X11/extensions/XKBproto.h' /usr/bin/ginstall -c -m 644 'XKBsrv.h' '/tmp/x11-build/package-kbproto/usr/include/X11/extensions/XKBsrv.h' /usr/bin/ginstall -c -m 644 'XKBstr.h' '/tmp/x11-build/package-kbproto/usr/include/X11/extensions/XKBstr.h' test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-kbproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'kbproto.pc' '/tmp/x11-build/package-kbproto/usr/lib/pkgconfig/kbproto.pc' make[1]: Leaving directory `/tmp/x11-build/kbproto-1.0.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file kbproto-1.0.3-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/XKBgeom.h usr/include/X11/extensions/XKB.h usr/include/X11/extensions/XKBproto.h usr/include/X11/extensions/XKBsrv.h usr/include/X11/extensions/XKBstr.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/kbproto.pc install/ install/slack-desc tar-1.13: kbproto-1.0.3-noarch-1.tar is the archive; not dumped Gzipping kbproto-1.0.3-noarch-1.tar... Renaming kbproto-1.0.3-noarch-1.tar.gz to kbproto-1.0.3-noarch-1.tgz... Moving kbproto-1.0.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating printproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/printproto-1.0.4' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-printproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'printproto.pc' '/tmp/x11-build/package-printproto/usr/lib/pkgconfig/printproto.pc' test -z "/usr/include/X11/extensions" || /usr/bin/mkdir -p "/tmp/x11-build/package-printproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'Print.h' '/tmp/x11-build/package-printproto/usr/include/X11/extensions/Print.h' /usr/bin/ginstall -c -m 644 'Printstr.h' '/tmp/x11-build/package-printproto/usr/include/X11/extensions/Printstr.h' make[1]: Leaving directory `/tmp/x11-build/printproto-1.0.4' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file printproto-1.0.4-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/printproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/Print.h usr/include/X11/extensions/Printstr.h install/ install/slack-desc tar-1.13: printproto-1.0.4-noarch-1.tar is the archive; not dumped Gzipping printproto-1.0.4-noarch-1.tar... Renaming printproto-1.0.4-noarch-1.tar.gz to printproto-1.0.4-noarch-1.tgz... Moving printproto-1.0.4-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating randrproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/randrproto-1.2.1' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-randrproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'randrproto.pc' '/tmp/x11-build/package-randrproto/usr/lib/pkgconfig/randrproto.pc' test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-randrproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'randr.h' '/tmp/x11-build/package-randrproto/usr/include/X11/extensions/randr.h' /usr/bin/ginstall -c -m 644 'randrproto.h' '/tmp/x11-build/package-randrproto/usr/include/X11/extensions/randrproto.h' test -z "/usr/share/doc/randrproto" || mkdir -p -- "/tmp/x11-build/package-randrproto/usr/share/doc/randrproto" /usr/bin/ginstall -c -m 644 'randrproto.txt' '/tmp/x11-build/package-randrproto/usr/share/doc/randrproto/randrproto.txt' make[1]: Leaving directory `/tmp/x11-build/randrproto-1.2.1' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file randrproto-1.2.1-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/randrproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/randr.h usr/include/X11/extensions/randrproto.h usr/share/ usr/doc/ usr/doc/randrproto/ usr/doc/randrproto/randrproto.txt install/ install/slack-desc tar-1.13: randrproto-1.2.1-noarch-1.tar is the archive; not dumped Gzipping randrproto-1.2.1-noarch-1.tar... Renaming randrproto-1.2.1-noarch-1.tar.gz to randrproto-1.2.1-noarch-1.tgz... Moving randrproto-1.2.1-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating recordproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/recordproto-1.13.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-recordproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-recordproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 recordproto.pc /tmp/x11-build/package-recordproto/usr/lib/pkgconfig/recordproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-recordproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-recordproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 record.h /tmp/x11-build/package-recordproto/usr/include/X11/extensions/record.h /usr/bin/ginstall -c -m 644 recordstr.h /tmp/x11-build/package-recordproto/usr/include/X11/extensions/recordstr.h make[1]: Leaving directory `/tmp/x11-build/recordproto-1.13.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file recordproto-1.13.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/recordproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/record.h usr/include/X11/extensions/recordstr.h install/ install/slack-desc tar-1.13: recordproto-1.13.2-noarch-1.tar is the archive; not dumped Gzipping recordproto-1.13.2-noarch-1.tar... Renaming recordproto-1.13.2-noarch-1.tar.gz to recordproto-1.13.2-noarch-1.tgz... Moving recordproto-1.13.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating renderproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/renderproto-0.9.3' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-renderproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'renderproto.pc' '/tmp/x11-build/package-renderproto/usr/lib/pkgconfig/renderproto.pc' test -z "/usr/include/X11/extensions" || /usr/bin/mkdir -p "/tmp/x11-build/package-renderproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'render.h' '/tmp/x11-build/package-renderproto/usr/include/X11/extensions/render.h' /usr/bin/ginstall -c -m 644 'renderproto.h' '/tmp/x11-build/package-renderproto/usr/include/X11/extensions/renderproto.h' test -z "/usr/share/doc/renderproto" || /usr/bin/mkdir -p "/tmp/x11-build/package-renderproto/usr/share/doc/renderproto" /usr/bin/ginstall -c -m 644 'renderproto.txt' '/tmp/x11-build/package-renderproto/usr/share/doc/renderproto/renderproto.txt' make[1]: Leaving directory `/tmp/x11-build/renderproto-0.9.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file renderproto-0.9.3-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/renderproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/render.h usr/include/X11/extensions/renderproto.h usr/share/ usr/doc/ usr/doc/renderproto/ usr/doc/renderproto/renderproto.txt install/ install/slack-desc tar-1.13: renderproto-0.9.3-noarch-1.tar is the archive; not dumped Gzipping renderproto-0.9.3-noarch-1.tar... Renaming renderproto-0.9.3-noarch-1.tar.gz to renderproto-0.9.3-noarch-1.tgz... Moving renderproto-0.9.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating resourceproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/resourceproto-1.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-resourceproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-resourceproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 resourceproto.pc /tmp/x11-build/package-resourceproto/usr/lib/pkgconfig/resourceproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-resourceproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-resourceproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 XResproto.h /tmp/x11-build/package-resourceproto/usr/include/X11/extensions/XResproto.h make[1]: Leaving directory `/tmp/x11-build/resourceproto-1.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file resourceproto-1.0.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/resourceproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/XResproto.h install/ install/slack-desc tar-1.13: resourceproto-1.0.2-noarch-1.tar is the archive; not dumped Gzipping resourceproto-1.0.2-noarch-1.tar... Renaming resourceproto-1.0.2-noarch-1.tar.gz to resourceproto-1.0.2-noarch-1.tgz... Moving resourceproto-1.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating scrnsaverproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/scrnsaverproto-1.1.0' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || mkdir -p -- "/tmp/x11-build/package-scrnsaverproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'scrnsaverproto.pc' '/tmp/x11-build/package-scrnsaverproto/usr/lib/pkgconfig/scrnsaverproto.pc' test -z "/usr/include/X11/extensions" || mkdir -p -- "/tmp/x11-build/package-scrnsaverproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'saver.h' '/tmp/x11-build/package-scrnsaverproto/usr/include/X11/extensions/saver.h' /usr/bin/ginstall -c -m 644 'saverproto.h' '/tmp/x11-build/package-scrnsaverproto/usr/include/X11/extensions/saverproto.h' /usr/bin/ginstall -c -m 644 'scrnsaver.h' '/tmp/x11-build/package-scrnsaverproto/usr/include/X11/extensions/scrnsaver.h' make[1]: Leaving directory `/tmp/x11-build/scrnsaverproto-1.1.0' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file scrnsaverproto-1.1.0-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/scrnsaverproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/saver.h usr/include/X11/extensions/saverproto.h usr/include/X11/extensions/scrnsaver.h install/ install/slack-desc tar-1.13: scrnsaverproto-1.1.0-noarch-1.tar is the archive; not dumped Gzipping scrnsaverproto-1.1.0-noarch-1.tar... Renaming scrnsaverproto-1.1.0-noarch-1.tar.gz to scrnsaverproto-1.1.0-noarch-1.tgz... Moving scrnsaverproto-1.1.0-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating trapproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/trapproto-3.4.3' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-trapproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-trapproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 trapproto.pc /tmp/x11-build/package-trapproto/usr/lib/pkgconfig/trapproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-trapproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-trapproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xtrapbits.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtrapbits.h /usr/bin/ginstall -c -m 644 xtrapddmi.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtrapddmi.h /usr/bin/ginstall -c -m 644 xtrapdi.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtrapdi.h /usr/bin/ginstall -c -m 644 xtrapemacros.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtrapemacros.h /usr/bin/ginstall -c -m 644 xtraplib.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtraplib.h /usr/bin/ginstall -c -m 644 xtraplibp.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtraplibp.h /usr/bin/ginstall -c -m 644 xtrapproto.h /tmp/x11-build/package-trapproto/usr/include/X11/extensions/xtrapproto.h make[1]: Leaving directory `/tmp/x11-build/trapproto-3.4.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file trapproto-3.4.3-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/trapproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xtrapbits.h usr/include/X11/extensions/xtrapddmi.h usr/include/X11/extensions/xtrapdi.h usr/include/X11/extensions/xtrapemacros.h usr/include/X11/extensions/xtraplib.h usr/include/X11/extensions/xtraplibp.h usr/include/X11/extensions/xtrapproto.h install/ install/slack-desc tar-1.13: trapproto-3.4.3-noarch-1.tar is the archive; not dumped Gzipping trapproto-3.4.3-noarch-1.tar... Renaming trapproto-3.4.3-noarch-1.tar.gz to trapproto-3.4.3-noarch-1.tgz... Moving trapproto-3.4.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating videoproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/videoproto-2.2.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-videoproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-videoproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 videoproto.pc /tmp/x11-build/package-videoproto/usr/lib/pkgconfig/videoproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-videoproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-videoproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 vldXvMC.h /tmp/x11-build/package-videoproto/usr/include/X11/extensions/vldXvMC.h /usr/bin/ginstall -c -m 644 Xv.h /tmp/x11-build/package-videoproto/usr/include/X11/extensions/Xv.h /usr/bin/ginstall -c -m 644 XvMC.h /tmp/x11-build/package-videoproto/usr/include/X11/extensions/XvMC.h /usr/bin/ginstall -c -m 644 XvMCproto.h /tmp/x11-build/package-videoproto/usr/include/X11/extensions/XvMCproto.h /usr/bin/ginstall -c -m 644 Xvproto.h /tmp/x11-build/package-videoproto/usr/include/X11/extensions/Xvproto.h make[1]: Leaving directory `/tmp/x11-build/videoproto-2.2.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file videoproto-2.2.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/videoproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/vldXvMC.h usr/include/X11/extensions/Xv.h usr/include/X11/extensions/XvMC.h usr/include/X11/extensions/XvMCproto.h usr/include/X11/extensions/Xvproto.h install/ install/slack-desc tar-1.13: videoproto-2.2.2-noarch-1.tar is the archive; not dumped Gzipping videoproto-2.2.2-noarch-1.tar... Renaming videoproto-2.2.2-noarch-1.tar.gz to videoproto-2.2.2-noarch-1.tgz... Moving videoproto-2.2.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xcmiscproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xcmiscproto-1.1.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xcmiscproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xcmiscproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xcmiscproto.pc /tmp/x11-build/package-xcmiscproto/usr/lib/pkgconfig/xcmiscproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xcmiscproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xcmiscproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xcmiscstr.h /tmp/x11-build/package-xcmiscproto/usr/include/X11/extensions/xcmiscstr.h make[1]: Leaving directory `/tmp/x11-build/xcmiscproto-1.1.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xcmiscproto-1.1.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xcmiscproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xcmiscstr.h install/ install/slack-desc tar-1.13: xcmiscproto-1.1.2-noarch-1.tar is the archive; not dumped Gzipping xcmiscproto-1.1.2-noarch-1.tar... Renaming xcmiscproto-1.1.2-noarch-1.tar.gz to xcmiscproto-1.1.2-noarch-1.tgz... Moving xcmiscproto-1.1.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xextproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xextproto-7.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xextproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xextproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xextproto.pc /tmp/x11-build/package-xextproto/usr/lib/pkgconfig/xextproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xextproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xextproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 dpms.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/dpms.h /usr/bin/ginstall -c -m 644 dpmsstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/dpmsstr.h /usr/bin/ginstall -c -m 644 extutil.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/extutil.h /usr/bin/ginstall -c -m 644 lbxbuf.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxbuf.h /usr/bin/ginstall -c -m 644 lbxbufstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxbufstr.h /usr/bin/ginstall -c -m 644 lbxdeltastr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxdeltastr.h /usr/bin/ginstall -c -m 644 lbximage.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbximage.h /usr/bin/ginstall -c -m 644 lbxopts.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxopts.h /usr/bin/ginstall -c -m 644 lbxstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxstr.h /usr/bin/ginstall -c -m 644 lbxzlib.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/lbxzlib.h /usr/bin/ginstall -c -m 644 MITMisc.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/MITMisc.h /usr/bin/ginstall -c -m 644 mitmiscstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/mitmiscstr.h /usr/bin/ginstall -c -m 644 multibuf.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/multibuf.h /usr/bin/ginstall -c -m 644 multibufst.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/multibufst.h /usr/bin/ginstall -c -m 644 security.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/security.h /usr/bin/ginstall -c -m 644 securstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/securstr.h /usr/bin/ginstall -c -m 644 shape.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/shape.h /usr/bin/ginstall -c -m 644 shapestr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/shapestr.h /usr/bin/ginstall -c -m 644 shmstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/shmstr.h /usr/bin/ginstall -c -m 644 sync.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/sync.h /usr/bin/ginstall -c -m 644 syncstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/syncstr.h /usr/bin/ginstall -c -m 644 Xag.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xag.h /usr/bin/ginstall -c -m 644 Xagsrv.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xagsrv.h /usr/bin/ginstall -c -m 644 Xagstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xagstr.h /usr/bin/ginstall -c -m 644 Xcup.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xcup.h /usr/bin/ginstall -c -m 644 Xcupstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xcupstr.h /usr/bin/ginstall -c -m 644 Xdbe.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xdbe.h /usr/bin/ginstall -c -m 644 Xdbeproto.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xdbeproto.h /usr/bin/ginstall -c -m 644 XEVI.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/XEVI.h /usr/bin/ginstall -c -m 644 XEVIstr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/XEVIstr.h /usr/bin/ginstall -c -m 644 Xext.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/Xext.h /usr/bin/ginstall -c -m 644 XLbx.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/XLbx.h /usr/bin/ginstall -c -m 644 XShm.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/XShm.h /usr/bin/ginstall -c -m 644 xtestext1.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/xtestext1.h /usr/bin/ginstall -c -m 644 XTest.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/XTest.h /usr/bin/ginstall -c -m 644 xteststr.h /tmp/x11-build/package-xextproto/usr/include/X11/extensions/xteststr.h make[1]: Leaving directory `/tmp/x11-build/xextproto-7.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xextproto-7.0.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xextproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/dpms.h usr/include/X11/extensions/dpmsstr.h usr/include/X11/extensions/extutil.h usr/include/X11/extensions/lbxbuf.h usr/include/X11/extensions/lbxbufstr.h usr/include/X11/extensions/lbxdeltastr.h usr/include/X11/extensions/lbximage.h usr/include/X11/extensions/lbxopts.h usr/include/X11/extensions/lbxstr.h usr/include/X11/extensions/lbxzlib.h usr/include/X11/extensions/MITMisc.h usr/include/X11/extensions/mitmiscstr.h usr/include/X11/extensions/multibuf.h usr/include/X11/extensions/multibufst.h usr/include/X11/extensions/security.h usr/include/X11/extensions/securstr.h usr/include/X11/extensions/shape.h usr/include/X11/extensions/shapestr.h usr/include/X11/extensions/shmstr.h usr/include/X11/extensions/sync.h usr/include/X11/extensions/syncstr.h usr/include/X11/extensions/Xag.h usr/include/X11/extensions/Xagsrv.h usr/include/X11/extensions/Xagstr.h usr/include/X11/extensions/Xcup.h usr/include/X11/extensions/Xcupstr.h usr/include/X11/extensions/Xdbe.h usr/include/X11/extensions/Xdbeproto.h usr/include/X11/extensions/XEVI.h usr/include/X11/extensions/XEVIstr.h usr/include/X11/extensions/Xext.h usr/include/X11/extensions/XLbx.h usr/include/X11/extensions/XShm.h usr/include/X11/extensions/xtestext1.h usr/include/X11/extensions/XTest.h usr/include/X11/extensions/xteststr.h install/ install/slack-desc tar-1.13: xextproto-7.0.2-noarch-1.tar is the archive; not dumped Gzipping xextproto-7.0.2-noarch-1.tar... Renaming xextproto-7.0.2-noarch-1.tar.gz to xextproto-7.0.2-noarch-1.tgz... Moving xextproto-7.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86bigfontproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86bigfontproto-1.1.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86bigfontproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xf86bigfontproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xf86bigfontproto.pc /tmp/x11-build/package-xf86bigfontproto/usr/lib/pkgconfig/xf86bigfontproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86bigfontproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xf86bigfontproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xf86bigfont.h /tmp/x11-build/package-xf86bigfontproto/usr/include/X11/extensions/xf86bigfont.h /usr/bin/ginstall -c -m 644 xf86bigfstr.h /tmp/x11-build/package-xf86bigfontproto/usr/include/X11/extensions/xf86bigfstr.h make[1]: Leaving directory `/tmp/x11-build/xf86bigfontproto-1.1.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86bigfontproto-1.1.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86bigfontproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xf86bigfont.h usr/include/X11/extensions/xf86bigfstr.h install/ install/slack-desc tar-1.13: xf86bigfontproto-1.1.2-noarch-1.tar is the archive; not dumped Gzipping xf86bigfontproto-1.1.2-noarch-1.tar... Renaming xf86bigfontproto-1.1.2-noarch-1.tar.gz to xf86bigfontproto-1.1.2-noarch-1.tgz... Moving xf86bigfontproto-1.1.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86dgaproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86dgaproto-2.0.3' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-xf86dgaproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'xf86dgaproto.pc' '/tmp/x11-build/package-xf86dgaproto/usr/lib/pkgconfig/xf86dgaproto.pc' test -z "/usr/include/X11/extensions" || /usr/bin/mkdir -p "/tmp/x11-build/package-xf86dgaproto/usr/include/X11/extensions" /usr/bin/ginstall -c -m 644 'xf86dga1.h' '/tmp/x11-build/package-xf86dgaproto/usr/include/X11/extensions/xf86dga1.h' /usr/bin/ginstall -c -m 644 'xf86dga1str.h' '/tmp/x11-build/package-xf86dgaproto/usr/include/X11/extensions/xf86dga1str.h' /usr/bin/ginstall -c -m 644 'xf86dga.h' '/tmp/x11-build/package-xf86dgaproto/usr/include/X11/extensions/xf86dga.h' /usr/bin/ginstall -c -m 644 'xf86dgastr.h' '/tmp/x11-build/package-xf86dgaproto/usr/include/X11/extensions/xf86dgastr.h' make[1]: Leaving directory `/tmp/x11-build/xf86dgaproto-2.0.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86dgaproto-2.0.3-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86dgaproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xf86dga1.h usr/include/X11/extensions/xf86dga1str.h usr/include/X11/extensions/xf86dga.h usr/include/X11/extensions/xf86dgastr.h install/ install/slack-desc tar-1.13: xf86dgaproto-2.0.3-noarch-1.tar is the archive; not dumped Gzipping xf86dgaproto-2.0.3-noarch-1.tar... Renaming xf86dgaproto-2.0.3-noarch-1.tar.gz to xf86dgaproto-2.0.3-noarch-1.tgz... Moving xf86dgaproto-2.0.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86driproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86driproto-2.0.3' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86driproto/usr/include/GL/internal mkdir -p -- /tmp/x11-build/package-xf86driproto/usr/include/GL/internal /usr/bin/ginstall -c -m 644 dri_interface.h /tmp/x11-build/package-xf86driproto/usr/include/GL/internal/dri_interface.h /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86driproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xf86driproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xf86driproto.pc /tmp/x11-build/package-xf86driproto/usr/lib/pkgconfig/xf86driproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86driproto/usr/include/X11/dri mkdir -p -- /tmp/x11-build/package-xf86driproto/usr/include/X11/dri /usr/bin/ginstall -c -m 644 xf86dri.h /tmp/x11-build/package-xf86driproto/usr/include/X11/dri/xf86dri.h /usr/bin/ginstall -c -m 644 xf86dristr.h /tmp/x11-build/package-xf86driproto/usr/include/X11/dri/xf86dristr.h make[1]: Leaving directory `/tmp/x11-build/xf86driproto-2.0.3' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86driproto-2.0.3-noarch-1.tar... ./ usr/ usr/include/ usr/include/GL/ usr/include/GL/internal/ usr/include/GL/internal/dri_interface.h usr/include/X11/ usr/include/X11/dri/ usr/include/X11/dri/xf86dri.h usr/include/X11/dri/xf86dristr.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86driproto.pc install/ install/slack-desc tar-1.13: xf86driproto-2.0.3-noarch-1.tar is the archive; not dumped Gzipping xf86driproto-2.0.3-noarch-1.tar... Renaming xf86driproto-2.0.3-noarch-1.tar.gz to xf86driproto-2.0.3-noarch-1.tgz... Moving xf86driproto-2.0.3-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86miscproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86miscproto-0.9.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86miscproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xf86miscproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xf86miscproto.pc /tmp/x11-build/package-xf86miscproto/usr/lib/pkgconfig/xf86miscproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86miscproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xf86miscproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xf86misc.h /tmp/x11-build/package-xf86miscproto/usr/include/X11/extensions/xf86misc.h /usr/bin/ginstall -c -m 644 xf86mscstr.h /tmp/x11-build/package-xf86miscproto/usr/include/X11/extensions/xf86mscstr.h make[1]: Leaving directory `/tmp/x11-build/xf86miscproto-0.9.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86miscproto-0.9.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86miscproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xf86misc.h usr/include/X11/extensions/xf86mscstr.h install/ install/slack-desc tar-1.13: xf86miscproto-0.9.2-noarch-1.tar is the archive; not dumped Gzipping xf86miscproto-0.9.2-noarch-1.tar... Renaming xf86miscproto-0.9.2-noarch-1.tar.gz to xf86miscproto-0.9.2-noarch-1.tgz... Moving xf86miscproto-0.9.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86rushproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86rushproto-1.1.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86rushproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xf86rushproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xf86rushproto.pc /tmp/x11-build/package-xf86rushproto/usr/lib/pkgconfig/xf86rushproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86rushproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xf86rushproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xf86rush.h /tmp/x11-build/package-xf86rushproto/usr/include/X11/extensions/xf86rush.h /usr/bin/ginstall -c -m 644 xf86rushstr.h /tmp/x11-build/package-xf86rushproto/usr/include/X11/extensions/xf86rushstr.h make[1]: Leaving directory `/tmp/x11-build/xf86rushproto-1.1.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86rushproto-1.1.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86rushproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xf86rush.h usr/include/X11/extensions/xf86rushstr.h install/ install/slack-desc tar-1.13: xf86rushproto-1.1.2-noarch-1.tar is the archive; not dumped Gzipping xf86rushproto-1.1.2-noarch-1.tar... Renaming xf86rushproto-1.1.2-noarch-1.tar.gz to xf86rushproto-1.1.2-noarch-1.tgz... Moving xf86rushproto-1.1.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xf86vidmodeproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xf86vidmodeproto-2.2.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86vidmodeproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xf86vidmodeproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xf86vidmodeproto.pc /tmp/x11-build/package-xf86vidmodeproto/usr/lib/pkgconfig/xf86vidmodeproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xf86vidmodeproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xf86vidmodeproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 xf86vmode.h /tmp/x11-build/package-xf86vidmodeproto/usr/include/X11/extensions/xf86vmode.h /usr/bin/ginstall -c -m 644 xf86vmstr.h /tmp/x11-build/package-xf86vidmodeproto/usr/include/X11/extensions/xf86vmstr.h make[1]: Leaving directory `/tmp/x11-build/xf86vidmodeproto-2.2.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xf86vidmodeproto-2.2.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xf86vidmodeproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/xf86vmode.h usr/include/X11/extensions/xf86vmstr.h install/ install/slack-desc tar-1.13: xf86vidmodeproto-2.2.2-noarch-1.tar is the archive; not dumped Gzipping xf86vidmodeproto-2.2.2-noarch-1.tar... Renaming xf86vidmodeproto-2.2.2-noarch-1.tar.gz to xf86vidmodeproto-2.2.2-noarch-1.tgz... Moving xf86vidmodeproto-2.2.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xineramaproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xineramaproto-1.1.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xineramaproto/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xineramaproto/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xineramaproto.pc /tmp/x11-build/package-xineramaproto/usr/lib/pkgconfig/xineramaproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xineramaproto/usr/include/X11/extensions mkdir -p -- /tmp/x11-build/package-xineramaproto/usr/include/X11/extensions /usr/bin/ginstall -c -m 644 panoramiXext.h /tmp/x11-build/package-xineramaproto/usr/include/X11/extensions/panoramiXext.h /usr/bin/ginstall -c -m 644 panoramiXproto.h /tmp/x11-build/package-xineramaproto/usr/include/X11/extensions/panoramiXproto.h /usr/bin/ginstall -c -m 644 Xinerama.h /tmp/x11-build/package-xineramaproto/usr/include/X11/extensions/Xinerama.h make[1]: Leaving directory `/tmp/x11-build/xineramaproto-1.1.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xineramaproto-1.1.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xineramaproto.pc usr/include/ usr/include/X11/ usr/include/X11/extensions/ usr/include/X11/extensions/panoramiXext.h usr/include/X11/extensions/panoramiXproto.h usr/include/X11/extensions/Xinerama.h install/ install/slack-desc tar-1.13: xineramaproto-1.1.2-noarch-1.tar is the archive; not dumped Gzipping xineramaproto-1.1.2-noarch-1.tar... Renaming xineramaproto-1.1.2-noarch-1.tar.gz to xineramaproto-1.1.2-noarch-1.tgz... Moving xineramaproto-1.1.2-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... sparc-slackware-linux-gnu checking host system type... sparc-slackware-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for sys/types.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for fd_set.fds_bits... no checking for fd_set.__fds_bits... yes checking whether const prototypes are supported... yes checking whether varargs prototypes are supported... yes checking whether nested prototypes are supported... yes checking whether to force function prototypes... yes checking whether to widen function prototypes... no configure: creating ./config.status config.status: creating Makefile config.status: creating Xpoll.h config.status: creating xproto.pc config.status: creating do-not-use-config.h config.status: creating Xfuncproto.h config.status: executing depfiles commands make all-am make[1]: Entering directory `/tmp/x11-build/xproto-7.0.12' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/tmp/x11-build/xproto-7.0.12' make[1]: Entering directory `/tmp/x11-build/xproto-7.0.12' make[1]: Nothing to be done for `install-exec-am'. test -z "/usr/include/X11" || /usr/bin/mkdir -p "/tmp/x11-build/package-xproto/usr/include/X11" /usr/bin/ginstall -c -m 644 'Xfuncproto.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xfuncproto.h' /usr/bin/ginstall -c -m 644 'Xpoll.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xpoll.h' test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/tmp/x11-build/package-xproto/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 'xproto.pc' '/tmp/x11-build/package-xproto/usr/lib/pkgconfig/xproto.pc' test -z "/usr/include/X11" || /usr/bin/mkdir -p "/tmp/x11-build/package-xproto/usr/include/X11" /usr/bin/ginstall -c -m 644 'ap_keysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/ap_keysym.h' /usr/bin/ginstall -c -m 644 'DECkeysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/DECkeysym.h' /usr/bin/ginstall -c -m 644 'HPkeysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/HPkeysym.h' /usr/bin/ginstall -c -m 644 'keysymdef.h' '/tmp/x11-build/package-xproto/usr/include/X11/keysymdef.h' /usr/bin/ginstall -c -m 644 'keysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/keysym.h' /usr/bin/ginstall -c -m 644 'Sunkeysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/Sunkeysym.h' /usr/bin/ginstall -c -m 644 'Xalloca.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xalloca.h' /usr/bin/ginstall -c -m 644 'Xarch.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xarch.h' /usr/bin/ginstall -c -m 644 'Xatom.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xatom.h' /usr/bin/ginstall -c -m 644 'Xdefs.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xdefs.h' /usr/bin/ginstall -c -m 644 'XF86keysym.h' '/tmp/x11-build/package-xproto/usr/include/X11/XF86keysym.h' /usr/bin/ginstall -c -m 644 'Xfuncs.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xfuncs.h' /usr/bin/ginstall -c -m 644 'X.h' '/tmp/x11-build/package-xproto/usr/include/X11/X.h' /usr/bin/ginstall -c -m 644 'Xmd.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xmd.h' /usr/bin/ginstall -c -m 644 'Xosdefs.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xosdefs.h' /usr/bin/ginstall -c -m 644 'Xos.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xos.h' /usr/bin/ginstall -c -m 644 'Xos_r.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xos_r.h' /usr/bin/ginstall -c -m 644 'Xproto.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xproto.h' /usr/bin/ginstall -c -m 644 'Xprotostr.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xprotostr.h' /usr/bin/ginstall -c -m 644 'Xthreads.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xthreads.h' /usr/bin/ginstall -c -m 644 'Xw32defs.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xw32defs.h' /usr/bin/ginstall -c -m 644 'XWDFile.h' '/tmp/x11-build/package-xproto/usr/include/X11/XWDFile.h' /usr/bin/ginstall -c -m 644 'Xwindows.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xwindows.h' /usr/bin/ginstall -c -m 644 'Xwinsock.h' '/tmp/x11-build/package-xproto/usr/include/X11/Xwinsock.h' make[1]: Leaving directory `/tmp/x11-build/xproto-7.0.12' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xproto-7.0.12-noarch-1.tar... ./ usr/ usr/include/ usr/include/X11/ usr/include/X11/Xfuncproto.h usr/include/X11/Xpoll.h usr/include/X11/ap_keysym.h usr/include/X11/DECkeysym.h usr/include/X11/HPkeysym.h usr/include/X11/keysymdef.h usr/include/X11/keysym.h usr/include/X11/Sunkeysym.h usr/include/X11/Xalloca.h usr/include/X11/Xarch.h usr/include/X11/Xatom.h usr/include/X11/Xdefs.h usr/include/X11/XF86keysym.h usr/include/X11/Xfuncs.h usr/include/X11/X.h usr/include/X11/Xmd.h usr/include/X11/Xosdefs.h usr/include/X11/Xos.h usr/include/X11/Xos_r.h usr/include/X11/Xproto.h usr/include/X11/Xprotostr.h usr/include/X11/Xthreads.h usr/include/X11/Xw32defs.h usr/include/X11/XWDFile.h usr/include/X11/Xwindows.h usr/include/X11/Xwinsock.h usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xproto.pc install/ install/slack-desc tar-1.13: xproto-7.0.12-noarch-1.tar is the archive; not dumped Gzipping xproto-7.0.12-noarch-1.tar... Renaming xproto-7.0.12-noarch-1.tar.gz to xproto-7.0.12-noarch-1.tgz... Moving xproto-7.0.12-noarch-1.tgz to /tmp/x11-build... Package creation complete. checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xproxymngproto.pc make: Nothing to be done for `all'. make[1]: Entering directory `/tmp/x11-build/xproxymanagementprotocol-1.0.2' make[1]: Nothing to be done for `install-exec-am'. /bin/sh ./mkinstalldirs /tmp/x11-build/package-xproxymanagementprotocol/usr/lib/pkgconfig mkdir -p -- /tmp/x11-build/package-xproxymanagementprotocol/usr/lib/pkgconfig /usr/bin/ginstall -c -m 644 xproxymngproto.pc /tmp/x11-build/package-xproxymanagementprotocol/usr/lib/pkgconfig/xproxymngproto.pc /bin/sh ./mkinstalldirs /tmp/x11-build/package-xproxymanagementprotocol/usr/include/X11/PM mkdir -p -- /tmp/x11-build/package-xproxymanagementprotocol/usr/include/X11/PM /usr/bin/ginstall -c -m 644 PM.h /tmp/x11-build/package-xproxymanagementprotocol/usr/include/X11/PM/PM.h /usr/bin/ginstall -c -m 644 PMproto.h /tmp/x11-build/package-xproxymanagementprotocol/usr/include/X11/PM/PMproto.h make[1]: Leaving directory `/tmp/x11-build/xproxymanagementprotocol-1.0.2' Slackware package maker, version 2.1. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating tar file xproxymanagementprotocol-1.0.2-noarch-1.tar... ./ usr/ usr/lib/ usr/lib/pkgconfig/ usr/lib/pkgconfig/xproxymngproto.pc usr/include/ usr/include/X11/ usr/include/X11/PM/ usr/include/X11/PM/PM.h usr/include/X11/PM/PMproto.h install/ install/slack-desc tar-1.13: xproxymanagementprotocol-1.0.2-noarch-1.tar is the archive; not dumped Gzipping xproxymanagementprotocol-1.0.2-noarch-1.tar... Renaming xproxymanagementprotocol-1.0.2-noarch-1.tar.gz to xproxymanagementprotocol-1.0.2-noarch-1.tgz... Moving xproxymanagementprotocol-1.0.2-noarch-1.tgz to /tmp/x11-build... Package creation complete.